Update sensor urls and links in Documentation (#1099)

* Updated URLs in toy schedule tutorial
>>
>> Changed URLs in the toy schedule tutorial to correct the sensor and asset links:
>> - Updated http://localhost:5000/sensors/2/ to http://localhost:5000/sensors/2
>> - Updated http://localhost:5000/assets/2/ to http://localhost:5000/assets/3

* Updated URLs in toy schedule expanded tutorial
>>
>> Changed URLs in the toy schedule expanded tutorial to correct the sensor and asset links:
>> - Updated http://localhost:5000/sensors/3/ to http://localhost:5000/sensors/3
>> - Updated http://localhost:5000/sensors/2/ to http://localhost:5000/sensors/2
>> - Updated http://localhost:5000/assets/1/ to http://localhost:5000/assets/3
>> - Updated http://localhost:5000/assets/1/status to http://localhost:5000/assets/2/status

* Updated URLs in toy-example-process tutorial
>>
>> Changed URLs in the toy-example-process tutorial to correct the sensor and asset links:
>> - Updated http://localhost:5000/assets/5/ to http://localhost:5000/assets/5

* Update commands and URLs in toy-example-reporter:
>> 1. Changed 'flexmeasures show data-sources --show-attributes --id 5' to 'flexmeasures show data-sources --show-attributes --id 6'.
>> 2. Updated URL for sensor 8 from 'http://localhost:5000/sensor/8/' to 'http://localhost:5000/sensors/8'.
>> 3. Updated URL for sensor 9 from 'http://localhost:5000/sensor/9/' to 'http://localhost:5000/sensors/9'.
>> 4. Updated URL for sensor 10 from 'http://localhost:5000/sensor/10/' to 'http://localhost:5000/sensors/10'.
>> 5. Updated URL for sensor 11 from 'http://localhost:5000/sensor/11/' to 'http://localhost:5000/sensors/11'.

* Update URL in toy-example-setup:
>> 'http://localhost:5000/sensors/1/' to 'http://localhost:5000/sensors/1

* Remove unnecessary line setting TOMORROW variable

documentation/tut/toy-example-expanded.rst

@@ -63,7 +63,7 @@ Setting the data source type to "forecaster" helps FlexMeasures to visually dist
     $ flexmeasures add beliefs --sensor 3 --source 4 solar-tomorrow.csv --timezone Europe/Amsterdam
     Successfully created beliefs
 
-The one-hour CSV data is automatically resampled to the 15-minute resolution of the sensor that is recording solar production. We can see solar production in the `FlexMeasures UI <http://localhost:5000/sensors/3/>`_ :
+The one-hour CSV data is automatically resampled to the 15-minute resolution of the sensor that is recording solar production. We can see solar production in the `FlexMeasures UI <http://localhost:5000/sensors/3>`_ :
 
 .. image:: https://github.com/FlexMeasures/screenshots/raw/main/tut/toy-schedule/sensor-data-production.png
     :align: center
@@ -85,13 +85,13 @@ Now, we'll reschedule the battery while taking into account the solar production
         --soc-at-start 50% --roundtrip-efficiency 90%
     New schedule is stored.
 
-We can see the updated scheduling in the `FlexMeasures UI <http://localhost:5000/sensors/2/>`_ :
+We can see the updated scheduling in the `FlexMeasures UI <http://localhost:5000/sensors/2>`_ :
 
 .. image:: https://github.com/FlexMeasures/screenshots/raw/main/tut/toy-schedule/sensor-data-charging-with-solar.png
     :align: center
 |
 
-The `asset page for the battery <http://localhost:5000/assets/1/>`_ now shows the solar data, too:
+The `asset page for the battery <http://localhost:5000/assets/3>`_ now shows the solar data, too:
 
 .. image:: https://github.com/FlexMeasures/screenshots/raw/main/tut/toy-schedule/asset-view-with-solar.png
     :align: center
@@ -117,7 +117,7 @@ In the case of the scheduler that we ran in the previous tutorial, which did not
 
 .. note:: You can add arbitrary sensors to a chart using the attribute ``sensors_to_show``. See :ref:`view_asset-data` for more.
 
-A nice feature is that you can check the data connectivity status of your building asset. Now that we have made the schedule, both lamps are green. You can also view it in `FlexMeasures UI <http://localhost:5000/assets/1/status>`_ :
+A nice feature is that you can check the data connectivity status of your building asset. Now that we have made the schedule, both lamps are green. You can also view it in `FlexMeasures UI <http://localhost:5000/assets/2/status>`_ :
 
 .. image:: https://github.com/FlexMeasures/screenshots/raw/main/tut/toy-schedule/screenshot_building_status.png
     :align: center

documentation/tut/toy-example-from-scratch.rst

@@ -62,15 +62,15 @@ Great. Let's see what we made:
 
 Here, negative values denote output from the grid, so that's when the battery gets charged.
 
-We can also look at the charging schedule in the `FlexMeasures UI <http://localhost:5000/sensors/2/>`_ (reachable via the asset page for the battery):
+We can also look at the charging schedule in the `FlexMeasures UI <http://localhost:5000/sensors/2>`_ (reachable via the asset page for the battery):
 
 .. image:: https://github.com/FlexMeasures/screenshots/raw/main/tut/toy-schedule/sensor-data-charging.png
     :align: center
 |
 
 Recall that we only asked for a 12 hour schedule here. We started our schedule *after* the high price peak (at 4am) and it also had to end *before* the second price peak fully realized (at 8pm). Our scheduler didn't have many opportunities to optimize, but it found some. For instance, it does buy at the lowest price (at 2pm) and sells it off at the highest price within the given 12 hours (at 6pm).
 
-The `asset page for the battery <http://localhost:5000/assets/2/>`_ shows both prices and the schedule.
+The `asset page for the battery <http://localhost:5000/assets/3>`_ shows both prices and the schedule.
 
 .. image:: https://github.com/FlexMeasures/screenshots/raw/main/tut/toy-schedule/asset-view-without-solar.png
     :align: center

documentation/tut/toy-example-process.rst

@@ -92,7 +92,7 @@ Finally, we'll schedule the process using the SHIFTABLE policy.
 Results
 ---------
 
-The image below shows the resulting schedules following each of the three policies. You will see similar results in your `FlexMeasures UI <http://localhost:5000/assets/4/>`_. 
+The image below shows the resulting schedules following each of the three policies. You will see similar results in your `FlexMeasures UI <http://localhost:5000/assets/5>`_. 
 
  
 .. image:: https://github.com/FlexMeasures/screenshots/raw/main/tut/toy-schedule/asset-view-process.png

documentation/tut/toy-example-reporter.rst

@@ -78,7 +78,7 @@ That's because reporters belong to a bigger category of classes that also contai
 
 .. code-block:: bash
 
-    $ flexmeasures show data-sources --show-attributes --id 5
+    $ flexmeasures show data-sources --show-attributes --id 6
 
          ID  Name          Type      User ID    Model           Version    Attributes                                  
        ----  ------------  --------  ---------  --------------  ---------  -----------------------------------------   
@@ -123,13 +123,12 @@ Finally, we can create the reporter with the following command:
 
 .. code-block:: bash
 
-    $ TOMORROW=$(date --date="next day" '+%Y-%m-%d')
     $ flexmeasures add report --reporter AggregatorReporter \
        --parameters headroom-parameters.json --config headroom-config.json \
        --start-offset DB,1D --end-offset DB,2D \
        --resolution PT15M
 
-Now we can visualize the headroom in the following `link <http://localhost:5000/sensor/8/>`_, which should resemble the following image.
+Now we can visualize the headroom in the following `link <http://localhost:5000/sensors/8>`_, which should resemble the following image.
 
 .. image:: https://github.com/FlexMeasures/screenshots/raw/main/tut/toy-schedule/sensor-data-headroom.png
     :align: center
@@ -184,7 +183,7 @@ Create report:
        --start-offset DB,1D --end-offset DB,2D
 
 
-Check the results `here <http://localhost:5000/sensor/9/>`_. The image should be similar to the one below.
+Check the results `here <http://localhost:5000/sensors/9>`_. The image should be similar to the one below.
 
 .. image:: https://github.com/FlexMeasures/screenshots/raw/main/tut/toy-schedule/sensor-data-inflexible.png
     :align: center
@@ -211,7 +210,7 @@ Create report:
        --parameters breakable-parameters.json \
        --start-offset DB,1D --end-offset DB,2D
 
-Check the results `here <http://localhost:5000/sensor/10/>`_. The image should be similar to the one below.
+Check the results `here <http://localhost:5000/sensors/10>`_. The image should be similar to the one below.
 
 
 .. image:: https://github.com/FlexMeasures/screenshots/raw/main/tut/toy-schedule/sensor-data-breakable.png
@@ -239,7 +238,7 @@ Create report:
        --parameters shiftable-parameters.json \
        --start-offset DB,1D --end-offset DB,2D
 
-Check the results `here <http://localhost:5000/sensor/11/>`_. The image should be similar to the one below.
+Check the results `here <http://localhost:5000/sensors/11>`_. The image should be similar to the one below.
 
 
 .. image:: https://github.com/FlexMeasures/screenshots/raw/main/tut/toy-schedule/sensor-data-shiftable.png

documentation/tut/toy-example-setup.rst

@@ -323,7 +323,7 @@ Let's look at the price data we just loaded:
 
 
 
-Again, we can also view these prices in the `FlexMeasures UI <http://localhost:5000/sensors/1/>`_:
+Again, we can also view these prices in the `FlexMeasures UI <http://localhost:5000/sensors/1>`_:
 
 .. image:: https://github.com/FlexMeasures/screenshots/raw/main/tut/toy-schedule/sensor-data-prices.png
     :align: center