is a Process controller, in the folling design you'll see it appiled as a
- hydroponic feeding system
- recirculating resivour controler
- greenhouse enviornment control
command | description |
---|---|
xfeed:5,m:15,g:10,b:30,ph:4 | xfeed: number of cycles, m g b ph: seconds for each dose pump |
command | description |
---|---|
m:19,g:32,b:100,ph:3 | sets dose values, seconds for each dose pump |
draintime:800 | time in seconds to drain resivour |
feedtime:400 | time in seconds feed pump stays on |
hottarget:80 | Target temperature in F |
coldtarget:50 | Target temperature in F |
command | description |
---|---|
feed | Fill, dose, Pump on timer |
drain | pump, drain valve on timer |
fill | fill valve open until full |
flush | drain, fill, drain |
dose1 | dose pump on 10 seconds |
dose2 | dose pump on 10 seconds |
dose3 | dose pump on 10 seconds |
dose4 | dose pump on 10 seconds |
pump | dose pump on 10 seconds |
toohot | Env cooler on until next sensor check |
toocold | Env heaer on until next sensor check |
lightsout | RF lights off |
lights | RF lights on |
- Closes fill vavles
- turns off pumps
- exits all current cycles
action | command | description |
---|---|---|
MQTT server | 192.168.1.1 | ipaddress or DNS of MQTT server |
MQTT user name | bob | auth user login |
MQTT password | ross | auth user password |
RF lights on | 3eff4453E2ead | RF hex code to turn lights on |
RF lights off | 3eff4453E2ead | RF hex code to turn lights off |
RF cooler on | 3eff4453E2ead | RF hex code to turn cooler on |
RF cooler off | 3eff4453E2ead | RF hex code to turn cooler off |
RF heater on | 3eff4453E2ead | RF hex code to turn heater on |
RF heater off | 3eff4453E2ead | RF hex code to turn heater off |