Throttle cut requires THR value under trigger value for shutdown (switch off).

[prikrylm]

v1.0.3 on X12S
Throttle cut requires that the THR input value be below "Trigger value" also for the shutdown action.
Requiring THR level below "Trigger value" is reasonable for switching on, but for switching off? Is that an intention?

[MIKE-DAILEY]

Yes, but the value can be adjusted. The Trigger value is the throttle stick position that the stick must be below for the cut function to be activated. Trigger value also controls the position where the stick must be to release the throttle cut.

[prikrylm]

Sure, activation behavior is OK. But is it OK if I am able to cut off throttle (deactivation) only if THR is below "trigger value"? Isn't it some kind of "emergency" switch, which must cut off engine in any situation?

[MIKE-DAILEY]

It is not an emergency cut. If you need an emergency cut you can do it with a Free Mix below.

[prikrylm]

OK, if it is not designed for emergnecy cut, probably works fine.