Distributeur de Liquide (DDL) #DIY

With this small project, I want to stop to wast some liquid that I'm used to use everyday like the washing lye for example.

Getting Started

To get a copy of the project, you can go on the GitHub's webpage of the project and click on the green button to download as a .ZIP file. However, if you're using a prompt console on an Unix machine use this line :

git clone https://github.com/Franck1333/Distributeur_de_Liquide.git

Prerequisites

To use the project, you will need some Hardware :

An Arduino Board  (here: Arduino Nano, https://tinyurl.com/arduinoMiniboards)
An OLED Screen  (here: 128 x 64, https://tinyurl.com/oledscreenarduino)
A Relay (https://tinyurl.com/RelayDDL)
Four LEDs (For the SWAGG, https://tinyurl.com/LEDsDDL)
Four 220 Ohms Resistors (To protect the LEDs, https://tinyurl.com/resistorDDL)
One 1K Ohm Resistor (To use a button with the board +, https://tinyurl.com/resistorDDL)
The pump (https://tinyurl.com/pumpDDL)
Two Button (To Interact with the board, https://tinyurl.com/buttonDDL)

Also, a breadboard or PCB and also Wires and tools needed to solder.

And you will also need some libraries and softwares :

- An Arduino IDE Up to date
- An Arduino board

Downloading/Installing

To get and downloaded the files, use this line :

git clone https://github.com/Franck1333/Distributeur_de_Liquide.git

When the project is Downloaded, check your folder, and you will see the folder Distributeur_de_Liquide .

Run

The Way to run the project :

1. To run the project; You need to compile and upload the Source code to the Arduino Board by using the Arduino IDE

2. When it's done, you should assembly all the component on a breadboard or solder all the components on a PCB

3. When the last step is done, You must Power on by pluggin an USB power source to your Arduino boards and if you didn't make any mistakes , It's Works.

Running the tests

That's how to test the program: Use the Arduino IDE with your files

<file>.ino

The Folders and Files

In this project we've got some folders

Folders

- 3D_Model: 3D Files needed to create a cases for the device.
- Pictures: Pictures of the project.

Files in "/Distributeur_de_Liquide/"

Main features of the program

- Distributeur_de_Liquide.ino: That's main program.
- Components_list.html: This is the list of components needed for this project.
- Schema & Schema_bb: Are the diagrams of the project made on 'Fritzing'.

Authors

• Franck ROCHAT - Initial work - Franck ROCHAT Thank You ! ❤️