net/hostapd*: Work around lack of MLME support

hostap MLME uses Linux data structures and definitions not available
in FreeBSD. The ability for hostapd to select the frequency (channel)
depends Linux MLME, though strictly it's not required. Work around the
Linux MLME requirement to configure device frequency.

The detailed description is: hostapd will only set the channel (frequency)
when Linux MLME is configured. Enabling NEED_AP_MLME will result in
numerous build errors due do Linux data structures and definitions not
available under FreeBSD. The code to set the frequency from the selected
channel is only within the NEED_AP_MLME code path because without MLME,
hostapd_get_hw_features() is an inline that always returns -1 whereas with
MLME hostapd_get_hw_features() will obtain hardware features from the
kernel. Until such time we simply set the frequency as configured.

PR:		276375
MFH:		2024Q1

net/hostapd-devel/Makefile

@@ -1,6 +1,6 @@
 PORTNAME=	hostapd
 PORTVERSION=	${COMMIT_DATE}
-PORTREVISION=	1
+PORTREVISION=	2
 CATEGORIES=	net
 PKGNAMESUFFIX=	-devel
 

net/hostapd-devel/files/patch-src_ap_hostapd.c

@@ -0,0 +1,31 @@
+--- src/ap/hostapd.c.orig	2024-02-18 01:24:29.000000000 -0800
++++ src/ap/hostapd.c	2024-02-26 20:25:50.505205000 -0800
+@@ -2029,6 +2029,20 @@
+ 	iface->wait_channel_update = 0;
+ 	iface->is_no_ir = false;
+
++#ifdef __FreeBSD
++	/* XXX hostapd_get_hw_features() is an inline that always returns -1
++	 * because MLME will not build under FreeBSD due to its use of
++	 * Linux definitions. Normally FreeBSD would uncondionally execute the
++	 * "Not all drivers support..." block. Instead we #ifdef out the entire
++	 * block of code instead of maintaining the fallacy that
++	 * hostapd_get_hw_features() returns anything meaninful.
++	 *
++	 * Ideally WANT_AP_MLME should be taught about FreeBSD data structures
++	 * and defintions. Instead we do this to enable channel selection in
++	 * hostapd.conf.
++	 */
++	iface->freq = iface->conf->channel;
++#else
+ 	if (hostapd_get_hw_features(iface)) {
+ 		/* Not all drivers support this yet, so continue without hw
+ 		 * feature data. */
+@@ -2080,6 +2094,7 @@
+ 		if (iface->conf->ieee80211h)
+ 			wpa_printf(MSG_DEBUG, "DFS support is enabled");
+ 	}
++#endif
+ 	return hostapd_setup_interface_complete(iface, 0);
+
+ fail:

net/hostapd/Makefile

@@ -1,6 +1,6 @@
 PORTNAME=	hostapd
 PORTVERSION=	2.10
-PORTREVISION=	9
+PORTREVISION=	10
 CATEGORIES=	net
 MASTER_SITES=	https://w1.fi/releases/
 

net/hostapd/files/patch-src_ap_hostapd.c

@@ -0,0 +1,31 @@
+--- src/ap/hostapd.c.orig	2022-01-16 12:51:29.000000000 -0800
++++ src/ap/hostapd.c	2024-02-26 20:24:39.350068000 -0800
+@@ -1698,6 +1698,20 @@
+ {
+ 	iface->wait_channel_update = 0;
+
++#ifdef __FreeBSD
++	/* XXX hostapd_get_hw_features() is an inline that always returns -1
++	 * because MLME will not build under FreeBSD due to its use of
++	 * Linux definitions. Normally FreeBSD would uncondionally execute the
++	 * "Not all drivers support..." block. Instead we #ifdef out the entire
++	 * block of code instead of maintaining the fallacy that
++	 * hostapd_get_hw_features() returns anything meaninful.
++	 *
++	 * Ideally WANT_AP_MLME should be taught about FreeBSD data structures
++	 * and defintions. Instead we do this to enable channel selection in
++	 * hostapd.conf.
++	 */
++	iface->freq = iface->conf->channel;
++#else
+ 	if (hostapd_get_hw_features(iface)) {
+ 		/* Not all drivers support this yet, so continue without hw
+ 		 * feature data. */
+@@ -1744,6 +1758,7 @@
+ 		if (iface->conf->ieee80211h)
+ 			wpa_printf(MSG_DEBUG, "DFS support is enabled");
+ 	}
++#endif
+ 	return hostapd_setup_interface_complete(iface, 0);
+
+ fail: