DE-CAPITALIZE OFFLINE

README.md

@@ -25,7 +25,7 @@ selected two algorithms to analyze if a gateway is reacheable:
 Depending on the connectivity, it will be decided if a change of the SSID is 
 necessary: There is a variable `switch_timeframe` (for ex.  1440 = 24h) that 
 defines a time interval after which a successful check that detects an offline
-state will result in a single change of the SSID to "FF_OFFLINE_$node_hostname".
+state will result in a single change of the SSID to "FF_Offline_$node_hostname".
 Only the first few minutes (also definable in a variable `first`) the 
 OFFLINE_SSID may also be set. All other minutes a checks will just be counted
 and reported in the log and whenever an online state is detected the SSID will
@@ -40,11 +40,11 @@ Adapt and add this block to your site.conf:
 
 ```
 ssid_changer = {
-  switch_timeframe = 30,  -- only once every timeframe (in minutes) the SSID will change to OFFLINE 
+  switch_timeframe = 30,  -- only once every timeframe (in minutes) the SSID will change to the Offline-SSID
                           -- set to 1440 to change once a day
                           -- set to 1 minute to change every time the router gets offline
   first = 5,              -- the first few minutes directly after reboot within which an Offline-SSID always may be activated (must be <= switch_timeframe)
-  prefix = 'FF_OFFLINE_', -- use something short to leave space for the nodename (no '~' allowed!)
+  prefix = 'FF_Offline_', -- use something short to leave space for the nodename (no '~' allowed!)
   suffix = 'nodename',    -- generate the SSID with either 'nodename', 'mac' or to use only the prefix: 'none'
   
   tq_limit_enabled = 0,   -- if false, the offline SSID will only be set if there is no gateway reacheable

gluon-ssid-changer/files/lib/gluon/ssid-changer/ssid-changer.sh

@@ -11,7 +11,7 @@ pgrep -f autoupdater >/dev/null && safety_exit 'autoupdater running'
 [ $(cat /proc/uptime | sed 's/\..*//g') -gt 60 ] || safety_exit 'less than one minute'
 [ $(find /var/run -name hostapd-phy* | wc -l) -gt 0 ] || safety_exit 'no hostapd-phy*'
 
-# only once every timeframe minutes the SSID will change to OFFLINE
+# only once every timeframe minutes the SSID will change to the Offline-SSID
 # (set to 1 minute to change immediately every time the router gets offline)
 MINUTES="$(uci -q get ssid-changer.settings.switch_timeframe)"
 : ${MINUTES:=30}
@@ -24,7 +24,7 @@ FIRST="$(uci -q get ssid-changer.settings.first)"
 # the Offline-SSID will start with this prefix use something short to leave space for the nodename
 # (no '~' allowed!)
 PREFIX="$(uci -q get ssid-changer.settings.prefix)"
-: ${PREFIX:='FF_OFFLINE_'}
+: ${PREFIX:='FF_Offline_'}
 
 if [ "$(uci -q get ssid-changer.settings.enabled)" = '0' ]; then 
 	DISABLED='1'

gluon-ssid-changer/i18n/de.po

@@ -14,8 +14,8 @@ msgid "Enabled"
 msgstr "Aktiviert"
 
 msgid ""
-"Here you can enable to automatically change the SSID to the OFFLINE-SSID "
+"Here you can enable to automatically change the SSID to the Offline-SSID "
 "when the node has no connection to the selected Gateway."
 msgstr ""
 "Hier kannst du aktivieren, dass dein Knoten automatisch die SSID auf die "
-"OFFLINE-SSID ändert, wenn keine Verbindung zum Freifunk Server besteht."
+"Offline-SSID ändert, wenn keine Verbindung zum Freifunk Server besteht."

gluon-ssid-changer/i18n/gluon-ssid-changer.pot

@@ -5,6 +5,6 @@ msgid "Enabled"
 msgstr ""
 
 msgid ""
-"Here you can enable to automatically change the SSID to the OFFLINE-SSID "
+"Here you can enable to automatically change the SSID to the Offline-SSID "
 "when the node has no connection to the selected Gateway."
 msgstr ""

gluon-ssid-changer/luasrc/lib/gluon/upgrade/500-ssid-changer

@@ -11,7 +11,7 @@ elseif not uci:get('ssid-changer', 'settings', 'enabled') then
 		enabled           = '1',
 		switch_timeframe  = site.ssid_changer.switch_timeframe or '30',
 		first             = site.ssid_changer.first or '5',
-		prefix            = site.ssid_changer.prefix or 'FF_OFFLINE_',
+		prefix            = site.ssid_changer.prefix or 'FF_Offline_',
 		suffix            = site.ssid_changer.suffix or 'nodename',
 		tq_limit_enabled  = site.ssid_changer.tq_limit_enabled or '0',
 		tq_limit_max      = site.ssid_changer.tq_limit_max or '45',

gluon-ssid-changer/luasrc/lib/gluon/web/model/admin/ssid-changer.lua

@@ -4,7 +4,7 @@ local util = require 'gluon.util'
 local f = Form(translate('Offline-SSID'))
 
 local s = f:section(Section, nil, translate(
-	'Here you can enable to automatically change the SSID to the OFFLINE-SSID '
+	'Here you can enable to automatically change the SSID to the Offline-SSID '
   .. 'when the node has no connection to the selected Gateway.'
 ))
 
@@ -24,7 +24,7 @@ function f:write()
 			-- switch_timeframe = switch_timeframe.data or '1440'
 			-- tq_limit_max = tq_limit_max.data or '55'
 			-- first = first.data or '5'
-			-- prefix = prefix.data or 'FF_OFFLINE_'
+			-- prefix = prefix.data or 'FF_Offline_'
 			-- suffix = suffix.data or 'nodename'
 			-- tq_limit_min = tq_limit_min.data or '45'
 			-- tq_limit_enabled = tq_limit_enabled.data or '0'