Skip to content

Combustion engine simulator that generates realistic audio.

License

Notifications You must be signed in to change notification settings

GDCorner/engine-sim

 
 

Repository files navigation

Engine Simulator

Alt text

Warning: project is in development and will change frequently


What is this?

This is a real-time internal combustion engine simulation designed specifically to produce engine audio and simulate engine response characteristics. It is NOT a scientific tool and cannot be expected to provide accurate figures for the purposes of engineering or engine tuning.

How do I install it?

This is a code repository and might not look like other software that you're used to downloading and installing (if you're not familiar with programming). To download a ready-to-use version of the application, navigate to the releases page, find the most recent release (ex. v0.1.5a), click "Assets" and download the .zip file with a name that starts with engine-sim-build. Unzip this file, then run bin/engine-sim-app.exe. The simulator should then start normally.

Check out our Frequently Asked Questions if you need more details.

How do I use it?

The UI is extremely minimalistic and there are only a few controls used to interact with the engine:

Key/Input Action
A Toggle ignition
S Hold for starter
D Enable dyno
H Enable RPM hold (see below for instructions)
G + Scroll Change hold speed
F Enter fullscreen mode
I Display dyno stats in the information panel
Shift Clutch (hold spacebar at the same time to slowly engage/disengage)
Up Arrow Up Gear
Down Arrow Down Gear
Z + Scroll Volume
X + Scroll Convolution Level
C + Scroll High frequency gain
V + Scroll Low frequency noise
B + Scroll High frequency noise
N + Scroll Simulation frequency
M Increase view layer
, Decrease view layer
Enter Reload engine script
Escape Exit the program
Q, W, E, R Change throttle position
Space + Scroll Fine throttle adjustment
1, 2, 3, 4, 5 Simulation time warp
Tab Change screen

Using the RPM hold

The RPM hold feature will hold the engine at a specific RPM and also measure the engine's horsepower and torque at that RPM. You can enable RPM hold by pressing the H key. You must then enable the dynomometer (press the D key) in order for the RPM hold to take effect. To change the hold speed, hold the G key and scroll with the mouse wheel. The RPM hold will be shown on the DYNO. SPEED gauge in the lower left of the screen.

Why is the code so sloppy?

I wrote this to demo in a YouTube video, not as a real product. If you would like it to become a usable product please reach out to me or join my Discord (link can be found in the description of the aforementioned YouTube video). I use this codebase for my own purposes and so it might change frequently and without warning.

How do I build it? (Ignore this section if you're not a developer!)

Note: this project currently only builds on Windows!

Step 1 - Clone the repository

git clone --recurse-submodules https://github.com/ange-yaghi/engine-sim

Step 2 - Install CMake

Install the latest version of CMake here if it's not already installed.

Step 3 - Install Dependencies

You will need to install the following dependencies and CMake will need to be able to locate them (ie. they need to be listed on your PATH):

1. SDL2
2. SDL2_image
3. Boost (make sure to build the optional dependencies)
4. Flex and Bison

Step 4 - Build and Run

From the root directory of the project, run the following commands:

mkdir build
cd build
cmake ..
cmake --build .

If these steps are successful, a Visual Studio solution will be generated in build. You can open this project with Visual Studio and then run the engine-sim-app project. If you encounter an error telling you that you're missing DLLs, you will have to copy those DLLs to your EXE's directory.

About

Combustion engine simulator that generates realistic audio.

Resources

License

Stars

Watchers

Forks

Packages

No packages published

Languages

  • C++ 98.2%
  • CMake 1.4%
  • C 0.4%