Support for partial clones

This release adds support for partial clones with mepo clone. A new option --partial has three settings:

• off: performs a "normal" git clone
• blobless: performs a blobless clone via git clone --filter=blob:none
• treeless: performs a treeless clone via git clone --filter=tree:0

The default is tecnically none of these, but that is equivalent to off. The off option is mainly added here to allow overriding of any .mepoconfig setting (see below).

The motivation for this is that it has been noticed that clones of GEOS (mainly MAPL) are often extremely slow. For example:

❯ time git clone git@github.com:GEOS-ESM/MAPL.git MAPL-normal
Cloning into 'MAPL-normal'...
remote: Enumerating objects: 704212, done.
remote: Counting objects: 100% (271489/271489), done.
remote: Compressing objects: 100% (6882/6882), done.
remote: Total 704212 (delta 269709), reused 266119 (delta 264584), pack-reused 432723
Receiving objects: 100% (704212/704212), 997.08 MiB | 2.59 MiB/s, done.
Resolving deltas: 100% (694344/694344), done.
noglob git clone git@github.com:GEOS-ESM/MAPL.git MAPL-normal  95.46s user 13.88s system 24% cpu 7:17.37 total

This took over 7 minutes to clone!

However, git supports partial clones as detailed in this GitHub Blog post. Now, of the two, blobless clones are fairly safe and give you faster initial clone speed at the cost of slower operations after that. As a test:

❯ time git clone --filter=blob:none git@github.com:GEOS-ESM/MAPL.git MAPL-blobless-from-git
Cloning into 'MAPL-blobless-from-git'...
remote: Enumerating objects: 21299, done.
remote: Counting objects: 100% (3171/3171), done.
remote: Compressing objects: 100% (1324/1324), done.
remote: Total 21299 (delta 1972), reused 2989 (delta 1829), pack-reused 18128
Receiving objects: 100% (21299/21299), 20.80 MiB | 2.99 MiB/s, done.
Resolving deltas: 100% (13343/13343), done.
remote: Enumerating objects: 942, done.
remote: Counting objects: 100% (552/552), done.
remote: Compressing objects: 100% (500/500), done.
remote: Total 942 (delta 112), reused 126 (delta 50), pack-reused 390
Receiving objects: 100% (942/942), 1.85 MiB | 136.00 KiB/s, done.
Resolving deltas: 100% (249/249), done.
Updating files: 100% (1064/1064), done.
noglob git clone --filter=blob:none git@github.com:GEOS-ESM/MAPL.git   1.38s user 0.54s system 6% cpu 27.609 total

28 seconds!

Treeless clones are usually faster than blobless as you aren't just filtering out blobs but whole trees. But per the blog:

We strongly recommend that developers do not use treeless clones for their daily work. Treeless clones are really only helpful for automated builds when you want to quickly clone, compile a project, then throw away the repository. In environments like GitHub Actions using public runners, you want to minimize your clone time so you can spend your machine time actually building your software! Treeless clones might be an excellent option for those environments.

As there are possible scenarios with CI that this could be useful for, the option is added. As for speed:

❯ time git clone --filter=tree:0 git@github.com:GEOS-ESM/MAPL.git MAPL-treeless
Cloning into 'MAPL-treeless'...
remote: Enumerating objects: 6875, done.
remote: Counting objects: 100% (843/843), done.
remote: Compressing objects: 100% (730/730), done.
remote: Total 6875 (delta 124), reused 805 (delta 113), pack-reused 6032
Receiving objects: 100% (6875/6875), 2.24 MiB | 277.00 KiB/s, done.
Resolving deltas: 100% (757/757), done.
remote: Enumerating objects: 106, done.
remote: Counting objects: 100% (70/70), done.
remote: Compressing objects: 100% (66/66), done.
remote: Total 106 (delta 1), reused 19 (delta 0), pack-reused 36
Receiving objects: 100% (106/106), 37.34 KiB | 538.00 KiB/s, done.
Resolving deltas: 100% (3/3), done.
remote: Enumerating objects: 942, done.
remote: Counting objects: 100% (552/552), done.
remote: Compressing objects: 100% (500/500), done.
remote: Total 942 (delta 112), reused 126 (delta 50), pack-reused 390
Receiving objects: 100% (942/942), 1.85 MiB | 2.09 MiB/s, done.
Resolving deltas: 100% (249/249), done.
Updating files: 100% (1064/1064), done.
noglob git clone --filter=tree:0 git@github.com:GEOS-ESM/MAPL.git   0.45s user 0.25s system 4% cpu 15.950 total

16 seconds!

Along with this option, we also add a new .mepoconfig setting where one can add:

[clone]
partial = blobless

and blobless clones will be the default.

---

From CHANGELOG.md

Added

• Added new --partial option to mepo clone with two settings: off, blobless, and treeless. If you set, --partial=blobless then
  the clone will not download blobs by using --filter=blob:none. If you set --partial=treeless then the clone will not download
  trees by using --filter=tree:0. The blobless option is useful for large repos that have a lot of binary files that you don't
  need. The treeless option is even more aggressive and SHOULD NOT be used unless you know what you are doing. The
  --partial=off option allows a user to override the default behavior of --partial in .mepoconfig and turn it off for a
  run of mepo clone.
• Add a new section for .mepoconfig to allow users to set --partial as a default for mepo clone.

---

What's Changed

• GitFlow: Merge main into develop for hotfix by @mathomp4 in #262
• Add support for partial clones by @mathomp4 in #264
• Protect submodule repos from treeless, add off option by @mathomp4 in #266
• GitFlow: Merge develop into main by @mathomp4 in #265

Full Changelog: v1.51.1...v1.52.0