Embed.toml

[default.probe]
protocol = "Swd"
speed = 400

[default.flashing]
# Whether or not the target should be flashed.
enabled = true
# Whether or not bytes erased but not rewritten with data from the ELF
# should be restored with their contents before erasing.
restore_unwritten_bytes = false
# Triggers a full chip erase instead of a page by page erase.
do_chip_erase = true

[default.reset]
# Whether or not the target should be reset.
# When flashing is enabled as well, the target will be reset after flashing.
enabled = true
# Whether or not the target should be halted after reset.
halt_afterwards = false

[default.general]
# The chip name of the chip to be debugged.
chip = "ATSAMD21E17L"
# A list of chip descriptions to be loaded during runtime.
chip_descriptions = []
# The default log level to be used. Possible values are one of:
#   "OFF", "ERROR", "WARN", "INFO", "DEBUG", "TRACE"
log_level = "WARN"
# Use this flag to assert the nreset & ntrst pins during attaching the probe to the chip.
connect_under_reset = false

[default.rtt]
# Whether or not an RTTUI should be opened after flashing.
enabled = true
# A list of channel associations to be displayed. If left empty, all channels are displayed.
# formats are: String, Defmt, BinaryLE,
channels = [
    { up = 0, down = 0, name = "RTT", format = "String" },
    #{ up = 0, name = "defmt", format = "Defmt" },
]
# The duration in ms for which the logger should retry to attach to RTT.
timeout = 3000
# Whether timestamps in the RTTUI are enabled
show_timestamps = true
# Whether to save rtt history buffer on exit.
log_enabled = false
# Where to save rtt history buffer relative to manifest path.
log_path = "./logs"

[default.gdb]
# Whether or not a GDB server should be opened after flashing.
enabled = false
# The connection string in host:port format wher the GDB server will open a socket.
gdb_connection_string = "127.0.0.1:1337"