BlueBomb Micro (BlueBomb for embedded systems)

This is a port of BlueBomb for BlueKitchen's btstack, which runs on various embedded systems and microcontrollers.

Get started

Follow the guide for one of the supported systems below to set up BlueBomb Micro for your microcontroller.

Supported systems

• Raspberry Pi Pico W
• ESP32

Usage

1. Make sure your microcontroller is plugged in and BlueBomb Micro running.
   If your microcontroller has an LED, it will be slowly flashing at this point.
2. Start your Wii and navigate to the app that you are exploiting, for the System Menu you only need to turn on the Wii, you can leave it sitting on the Health and Safety screen.
3. Turn OFF your wiimote at this point. DO NOT let anything else connect to the console via bluetooth.
4. Make sure you console is close to your microcontroller. You may have to move it closer to get it in range, this will depend on your microcontroller.
5. Click the SYNC button on your console. You may have to click it several times in a row before it sees the microcontroller.
   If your microcontroller has an LED, you will know it is connected when the LED starts flashing quickly. Stop pushing the SYNC button and wait for bluebomb to run. BlueBomb Micro will load a boot.elf off the root of a FAT32 formatted USB drive and run it. You can use the HackMii Installer's boot.elf from here to get the Homebrew Channel.

Credits

• @Fullmetal5 for BlueBomb
• BlueKitchen for their btstack