Scripts for wifi password hacking using aircrack-ng
- Change wlan0 to your network adapter name in 1_discover.sh 2_capture.sh and 3_deauth.sh
Each program will be ran sequentially.
-
Start by running 1_discover.sh to find bssids and channels.
-
While this is running, run 2_capture.sh to dump captures into captures/
-
While both of the above scripts are running, use 3_deauth.sh to send deauth packets to grab the handshake.
-
Run the deauth script until PMKID is listed under the capture script.
After handshake is obtained, all 3 scripts can be closed.
-
Run 4_converter.sh to convert packet capture to hashcat file, which is placed into hashes/
-
Run 5_crack.sh to crack the password. Cracked password will be stored in passwords/ and will be cleaned up using awk.
-
(Optional) Run 6_cleanup.sh to clear hashes/* and captures/* after the password is obtained.
- hcxtools
- aircrack-ng
- hashcat
- a good wordlist (such as rockyou)
- must have a monitor-mode capable network adapter. I recommend using Alfa's adapters - AWUS036AC or AWUS036ACS.
Make sure to install all required drivers for the adapter before attempting this.
Remember to change the adapter name.
Note that this is for educational purposes only. Don't use any network scanning or password cracking on a network you don't have explicit permission to do this on.