ESP32 with Arducam Mini 2MP OV2640

This is an early port of the Arduino Arducam-Software for the ESP32 https://github.com/ArduCAM

Currently it only works with the Arducam Mini 2MP OV2640. I doesn't own any other Arducams at the moment.

It is still not 100% stable. Tested with Arduino 1.8.0 .

1. Download and install the ESP32 Arduino library https://github.com/espressif/arduino-esp32
2. Copy the Arducam library into your Arduino library folder (ARDUCAM_ESP32_TCP.ino)
3. Open the Arduinosketch
4. Set your Wifi-Settings
5. Upload the sketch to the ESP32
6. Open a TCP Server on your PC

for i in {1..1000}; do sudo nc -l 80 | xxd -p -r > ${i}.jpg; done 7. (Re)-Start the ESP32

Arducam Mini 2MP	ESP32
VCC	5V
GND	GND
SCL	GPIO 22
SDA	GPIO 21
CS	GPIO 05
SCK	GPIO 18
MOSI	GPIO 23
MISO	GPIO 19

Ignore the right side of the picture. It is just a button and a pir sensor which aren't necessary for this code.

Test image. I have to clean my sensor somehow....