Merge pull request #3 from Altcoin-Cash/master

changed docs

doc/README.md

@@ -1,4 +1,4 @@
-HTH Core 1.0.0
+HTH Core 1.2.0.0
 =====================
 
 This is the official reference wallet for HTH digital currency and comprises the backbone of the HTH peer-to-peer network. You can [download HTH Core](https://github.com/HTHcoin/HTH/releases/latest) or [build it yourself](#building) using the guides below.

doc/dnsseed-policy.md

@@ -44,7 +44,7 @@ related to the DNS seed operation.
 If these expectations cannot be satisfied the operator should
 discontinue providing services and contact the active HTH
 Core development team as well as posting on
-[bitcoin-dev](https://lists.linuxfoundation.org/mailman/listinfo/bitcoin-dev).
+[HTH Discord](https://discord.gg/xqGjacW) or [Bitcointalk ANN](https://bitcointalk.org/index.php?topic=4578705).
 
 Behavior outside of these expectations may be reasonable in some
 situations but should be discussed in public in advance.

doc/gitian-building.md

@@ -11,7 +11,7 @@ the same, tested dependencies are used and statically built into the executable.
 Multiple developers build the source code by following a specific descriptor
 ("recipe"), cryptographically sign the result, and upload the resulting signature.
 These results are compared and only if they match, the build is accepted and uploaded
-to hthcoin.info.
+to https://hthcoin.world.
 
 More independent Gitian builders are needed, which is why this guide exists.
 It is preferred you follow these steps yourself instead of using someone else's
@@ -222,7 +222,7 @@ Connecting to the VM
 
 After the VM has booted you can connect to it using SSH, and files can be copied from and to the VM using a SFTP utility.
 Connect to `localhost`, port `22222` (or the port configured when installing the VM).
-On Windows you can use [putty](http://www.chiark.greenend.org.uk/~sgtatham/putty/download.html) and [WinSCP](http://winscp.net/eng/index.php).
+On Windows you can use [MobaXterm](https://mobaxterm.mobatek.net/download.html), [putty](http://www.chiark.greenend.org.uk/~sgtatham/putty/download.html) and [WinSCP](http://winscp.net/eng/index.php).
 
 For example, to connect as `root` from a Linux command prompt use
 

doc/guide-startmany.md

@@ -4,7 +4,7 @@
 There are many ways to setup a wallet to support start-many. This guide will walk through two of them.
 
 1. [Importing an existing wallet (recommended if you are consolidating wallets).](#option1)
-2. [Sending 1000 HTH to new wallet addresses.](#option2)
+2. [Sending 2500000 HTH to new wallet addresses.](#option2)
 
 ## <a name="option1"></a>Option 1. Importing an existing wallet
 
@@ -48,17 +48,17 @@ The wallet will re-scan and you will see your available balance increase by the
 2. Click the Receive tab.
 3. Fill in the form to request a payment.
     * Label: mn01
-    * Amount: 1000 (optional)
+    * Amount: 2500000 (optional)
     * Click *Request payment* button
 5. Click the *Copy Address* button
 
 Create a new wallet address for each Masternode.
 
 Close your QT Wallet.
 
-### Send 1000 HTH to New Addresses
+### Send 2500000 HTH to New Addresses
 
-Just like setting up a standard MN. Send exactly 1000 HTH to each new address created above.
+Just like setting up a standard MN. Send exactly 2500000 HTH to each new address created above.
 
 ### Create New Masternode Private Keys
 
@@ -78,11 +78,11 @@ Remember... this is local. Make sure your QT is not running.
 
 Create the `masternode.conf` file in the same directory as your `wallet.dat`.
 
-Copy the masternode private key and correspondig collateral output transaction that holds the 1000 HTH.
+Copy the masternode private key and correspondig collateral output transaction that holds the 2500000 HTH.
 
 The masternode private key may be an existing key from [Option 1](#option1), or a newly generated key from [Option 2](#option2). 
 
-*Note: The masternode priviate key is **not** the same as a wallet private key. **Never** put your wallet private key in the masternode.conf file. That is almost equivalent to putting your 1000 HTH on the remote server and defeats the purpose of a hot/cold setup.*
+*Note: The masternode priviate key is **not** the same as a wallet private key. **Never** put your wallet private key in the masternode.conf file. That is almost equivalent to putting your 2500000 HTH on the remote server and defeats the purpose of a hot/cold setup.*
 
 ### Get the collateral output
 
@@ -106,8 +106,8 @@ alias ipaddress:port masternode_private_key collateral_output collateral_output_
 Example:
 
 ```
-mn01 127.0.0.1:9999 93HaYBVUCYjEMeeH1Y4sBGLALQZE1Yc1K64xiqgX37tGBDQL8Xg 2bcd3c84c84f87eaa86e4e56834c92927a07f9e18718810b92e0d0324456a67c 0
-mn02 127.0.0.2:9999 93WaAb3htPJEV8E9aQcN23Jt97bPex7YvWfgMDTUdWJvzmrMqey aa9f1034d973377a5e733272c3d0eced1de22555ad45d6b24abadff8087948d4 0
+mn01 127.0.0.1:35888 93HaYBVUCYjEMeeH1Y4sBGLALQZE1Yc1K64xiqgX37tGBDQL8Xg 2bcd3c84c84f87eaa86e4e56834c92927a07f9e18718810b92e0d0324456a67c 0
+mn02 127.0.0.2:35888 93WaAb3htPJEV8E9aQcN23Jt97bPex7YvWfgMDTUdWJvzmrMqey aa9f1034d973377a5e733272c3d0eced1de22555ad45d6b24abadff8087948d4 0
 ```
 
 ## What about the hth.conf file?
@@ -166,14 +166,12 @@ hth-cli masternode status
 {
     "vin" : "CTxIn(COutPoint(<collateral_output>, <collateral_output_index>), scriptSig=)",
     "service" : "<ipaddress>:<port>",
-    "pubkey" : "<1000 HTH address>",
+    "pubkey" : "<2500000 HTH address>",
     "status" : "Masternode successfully started"
 }
 ```
 Command output should have "_Masternode successfully started_" in its `status` field now. If it says "_not capable_" instead, you should check your config again.
 
 ### Local
 
-Search your Masternodes on https://hthninja.pl/masternodes.html
-
-_Hint: Bookmark it, you definitely will be using this site a lot._
+To add: Masternode explorer