Skip to content

Elegant PCB Business Card made with Inkscape, Kicad and Svg2Shenzen.

License

Notifications You must be signed in to change notification settings

Hanqaqa/PCB_Business_Card

Repository files navigation

PCB Business Card

In this repository I will explain the steps I followed to create this Business Card made out of PCB material inspired by Chris Tully's card from Hackaday

Front Back

There are more pictures on the Media folder.

I have used 3 Open Source Programs in total:

The instructions are very easy and clear on how to install each program.

Creating the Canvas in Inkscape

Once the extension has been added in Inkscape. Go to Extension > Svg2Shenzhen > Prepare Document and create a 100 x 100 mm document and click Apply.

Start creating your design by layers. Keep in mind how Unexposed Copper, Exposed Copper, SilkScreen and Naked FR4 look like. Try to play with those combinations. This video by TwinkleTwinkie gives a good tutorial on how the whole proccess works. He also shows a good overview of the color palette you will have:

Color Palette

After fiddling with Inkscape for a couple of hours (The GUI isn't that intuitive and I wasn't particularly inspired) I ended up with these layers:

Final Composition

Disclaimer: I couldn't get to work the edge.cuts layer in Inkscape (Same problem as him), so since it was a simple 85.6x54 mm card with edges of 2.5 mm radius. I easily drew them in KiCad in the Edge.Cuts Layer. In order to get the edge.cuts layer to work when you export to KiCad in the Svg2Shenzen extension. Tick the Flatten Bezier option.

Sending the File

Once I had everything finished. I prepared my Gerber files in KiCad, packed them inside a rar and ordered them to JLCPCB with standard 0.8mm thickness and everything else with default settings: HASL with lead (Next batch will be done lead free, since it is safer for humans and the enviorenment, and the price only increases about 10 cents per card), FR4 base, black PCB Color... 10 of them cost me $4 + $20 shipping ($2.40 a card), so a bit expensive for my taste.

In this repository you can find the SVG file I made in Inkscape, as well as the Gerber files I made in KiCad and sent to JLCPCB.

Youtube Video

After quite a few requests from people telling me to help them with their PCB Business Cards, I decided to create my own Youtube tutorial! Enjoy it!

Thumbnail

About

Elegant PCB Business Card made with Inkscape, Kicad and Svg2Shenzen.

Topics

Resources

License

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published