Conect your pad of beatmania IIDX USKOC to an Arduino Leonardo, the code is from 4yn
You can buy an Arduino Leonardo from Ebay or AliExpress, unless you want an original version Arduino.cc
The encoder or scarth from your USKOC beatmania pad will look like this IMG 1 reverse IMG2
So to connect the the quadrature encoder into the arduino, is necesary make the following setup
(Work in progres)
leoo.ino uses the following pins:
Item | Pin |
---|---|
Buttons | |
Btn 1 Switch | A0 |
Btn 2 Switch | A1 |
Btn 3 Switch | A2 |
Btn 4 Switch | A3 |
Btn 5 Switch | A4 |
Btn 6 Switch | A5 |
Btn 7 Switch | 13 |
Btn 8 Switch (Star) | 12 |
Btn 9 Switch (Select) | 11 |
Encoders | |
Turntable Enc Channel A | 0 |
Turntable Enc Channel B | 1 |