This tutorial is a step-by-step introduction to installing Icinga 2 and Icinga Web 2. It assumes that you are familiar with the operating system you're using to install Icinga 2.
First off you will have to install Icinga 2. The preferred way of doing this is to use the official package repositories depending on which operating system and distribution you are running.
| Distribution | Repository |
|---|---|
| Debian | debmon, Icinga Repository |
| Ubuntu | Icinga PPA, Icinga Repository |
| RHEL/CentOS | Icinga Repository |
| openSUSE | Icinga Repository, Server Monitoring Repository |
| SLES | Icinga Repository |
| Gentoo | Upstream |
| FreeBSD | Upstream |
| ArchLinux | Upstream |
Packages for distributions other than the ones listed above may also be available. Please contact your distribution packagers.
You need to add the Icinga repository to your package management configuration. Below is a list with examples for the various distributions.
Debian (debmon):
# wget -O - http://debmon.org/debmon/repo.key 2>/dev/null | apt-key add -
# echo 'deb http://debmon.org/debmon debmon-jessie main' >/etc/apt/sources.list.d/debmon.list
# apt-get update
Ubuntu (PPA):
# add-apt-repository ppa:formorer/icinga
# apt-get update
RHEL/CentOS:
# rpm --import http://packages.icinga.org/icinga.key
# curl -o /etc/yum.repos.d/ICINGA-release.repo http://packages.icinga.org/epel/ICINGA-release.repo
# yum makecache
The packages for RHEL/CentOS depend on other packages which are distributed as part of the EPEL repository. Please make sure to enable this repository by following these instructions.
Fedora:
# rpm --import http://packages.icinga.org/icinga.key
# curl -o /etc/yum.repos.d/ICINGA-release.repo http://packages.icinga.org/fedora/ICINGA-release.repo
# yum makecache
SLES 11:
# zypper ar http://packages.icinga.org/SUSE/ICINGA-release-11.repo
# zypper ref
The packages for SLES 11 depend on the openssl1 package which is distributed
as part of the SLES 11 Security Module.
SLES 12:
# zypper ar http://packages.icinga.org/SUSE/ICINGA-release.repo
# zypper ref
openSUSE:
# zypper ar http://packages.icinga.org/openSUSE/ICINGA-release.repo
# zypper ref
You can install Icinga 2 by using your distribution's package manager
to install the icinga2 package.
Debian/Ubuntu:
# apt-get install icinga2
RHEL/CentOS 5/6:
# yum install icinga2
# chkconfig icinga2 on
# service icinga2 start
RHEL/CentOS 7 and Fedora:
# yum install icinga2
# systemctl enable icinga2
# systemctl start icinga2
SLES/openSUSE:
# zypper install icinga2
FreeBSD:
# pkg install icinga2
The default installation will enable three features required for a basic Icinga 2 installation:
checkerfor executing checksnotificationfor sending notificationsmainlogfor writing theicinga2.logfile
You can verify that by calling icinga2 feature list
CLI command to see which features are
enabled and disabled.
# icinga2 feature list
Disabled features: api command compatlog debuglog graphite icingastatus ido-mysql ido-pgsql livestatus notification perfdata statusdata syslog
Enabled features: checker mainlog notification
By default Icinga 2 uses the following files and directories:
| Path | Description |
|---|---|
| /etc/icinga2 | Contains Icinga 2 configuration files. |
| /etc/init.d/icinga2 | The Icinga 2 init script. |
| /usr/sbin/icinga2 | The Icinga 2 binary. |
| /usr/share/doc/icinga2 | Documentation files that come with Icinga 2. |
| /usr/share/icinga2/include | The Icinga Template Library and plugin command configuration. |
| /var/run/icinga2 | PID file. |
| /var/run/icinga2/cmd | Command pipe and Livestatus socket. |
| /var/cache/icinga2 | status.dat/objects.cache, icinga2.debug files |
| /var/spool/icinga2 | Used for performance data spool files. |
| /var/lib/icinga2 | Icinga 2 state file, cluster log, local CA and configuration files. |
| /var/log/icinga2 | Log file location and compat/ directory for the CompatLogger feature. |
FreeBSD uses slightly different paths:
By default Icinga 2 uses the following files and directories:
| Path | Description |
|---|---|
| /usr/local/etc/icinga2 | Contains Icinga 2 configuration files. |
| /usr/local/etc/rc.d/icinga2 | The Icinga 2 init script. |
| /usr/local/sbin/icinga2 | The Icinga 2 binary. |
| /usr/local/share/doc/icinga2 | Documentation files that come with Icinga 2. |
| /usr/local/share/icinga2/include | The Icinga Template Library and plugin command configuration. |
| /var/run/icinga2 | PID file. |
| /var/run/icinga2/cmd | Command pipe and Livestatus socket. |
| /var/cache/icinga2 | status.dat/objects.cache, icinga2.debug files |
| /var/spool/icinga2 | Used for performance data spool files. |
| /var/lib/icinga2 | Icinga 2 state file, cluster log, local CA and configuration files. |
| /var/log/icinga2 | Log file location and compat/ directory for the CompatLogger feature. |
Without plugins Icinga 2 does not know how to check external services. The Monitoring Plugins Project provides an extensive set of plugins which can be used with Icinga 2 to check whether services are working properly.
The recommended way of installing these standard plugins is to use your distribution's package manager.
For your convenience here is a list of package names for some of the more popular operating systems/distributions:
| OS/Distribution | Package Name | Installation Path |
|---|---|---|
| RHEL/CentOS (EPEL) | nagios-plugins-all | /usr/lib/nagios/plugins or /usr/lib64/nagios/plugins |
| Debian | nagios-plugins | /usr/lib/nagios/plugins |
| FreeBSD | monitoring-plugins | /usr/local/libexec/nagios |
| OS X (MacPorts) | nagios-plugins | /opt/local/libexec |
Depending on which directory your plugins are installed into you may need to
update the global PluginDir constant in your Icinga 2 configuration.
This constant is used by the check command definitions contained in the Icinga Template Library
to determine where to find the plugin binaries.
Please refer to the plugins chapter for details about how to integrate additional check plugins into your Icinga 2 setup.
Icinga 2's init script is installed in /etc/init.d/icinga2 (/usr/local/etc/rc.d/icinga2 on FreeBSD) by default:
# /etc/init.d/icinga2
Usage: /etc/init.d/icinga2 {start|stop|restart|reload|checkconfig|status}
The init script supports the following actions:
| Command | Description |
|---|---|
| start | The start action starts the Icinga 2 daemon. |
| stop | The stop action stops the Icinga 2 daemon. |
| restart | The restart action is a shortcut for running the stop action followed by start. |
| reload | The reload action sends the HUP signal to Icinga 2 which causes it to restart. Unlike the restart action reload does not wait until Icinga 2 has restarted. |
| checkconfig | The checkconfig action checks if the /etc/icinga2/icinga2.conf configuration file contains any errors. |
| status | The status action checks if Icinga 2 is running. |
By default the Icinga 2 daemon is running as icinga user and group
using the init script. Using Debian packages the user and group are set to
nagios for historical reasons.
Some distributions (e.g. Fedora, openSUSE and RHEL/CentOS 7) use systemd. The Icinga 2 packages automatically install the necessary systemd unit files.
The Icinga 2 systemd service can be (re-)started, reloaded, stopped and also queried for its current status.
# systemctl status icinga2
icinga2.service - Icinga host/service/network monitoring system
Loaded: loaded (/usr/lib/systemd/system/icinga2.service; disabled)
Active: active (running) since Mi 2014-07-23 13:39:38 CEST; 15s ago
Process: 21692 ExecStart=/usr/sbin/icinga2 -c ${ICINGA2_CONFIG_FILE} -d -e ${ICINGA2_ERROR_LOG} -u ${ICINGA2_USER} -g ${ICINGA2_GROUP} (code=exited, status=0/SUCCESS)
Process: 21674 ExecStartPre=/usr/sbin/icinga2-prepare-dirs /etc/sysconfig/icinga2 (code=exited, status=0/SUCCESS)
Main PID: 21727 (icinga2)
CGroup: /system.slice/icinga2.service
21727 /usr/sbin/icinga2 -c /etc/icinga2/icinga2.conf -d -e /var/log/icinga2/error.log -u icinga -g icinga --no-stack-rlimit
Jul 23 13:39:38 nbmif icinga2[21692]: [2014-07-23 13:39:38 +0200] information/ConfigItem: Checked 309 Service(s).
Jul 23 13:39:38 nbmif icinga2[21692]: [2014-07-23 13:39:38 +0200] information/ConfigItem: Checked 1 User(s).
Jul 23 13:39:38 nbmif icinga2[21692]: [2014-07-23 13:39:38 +0200] information/ConfigItem: Checked 15 Notification(s).
Jul 23 13:39:38 nbmif icinga2[21692]: [2014-07-23 13:39:38 +0200] information/ConfigItem: Checked 4 ScheduledDowntime(s).
Jul 23 13:39:38 nbmif icinga2[21692]: [2014-07-23 13:39:38 +0200] information/ConfigItem: Checked 1 UserGroup(s).
Jul 23 13:39:38 nbmif icinga2[21692]: [2014-07-23 13:39:38 +0200] information/ConfigItem: Checked 1 IcingaApplication(s).
Jul 23 13:39:38 nbmif icinga2[21692]: [2014-07-23 13:39:38 +0200] information/ConfigItem: Checked 8 Dependency(s).
Jul 23 13:39:38 nbmif systemd[1]: Started Icinga host/service/network monitoring system.
The systemctl command supports the following actions:
| Command | Description |
|---|---|
| start | The start action starts the Icinga 2 daemon. |
| stop | The stop action stops the Icinga 2 daemon. |
| restart | The restart action is a shortcut for running the stop action followed by start. |
| reload | The reload action sends the HUP signal to Icinga 2 which causes it to restart. Unlike the restart action reload does not wait until Icinga 2 has restarted. |
| status | The status action checks if Icinga 2 is running. |
| enable | The enable action enables the service being started at system boot time (similar to chkconfig) |
Examples:
# systemctl enable icinga2
# systemctl restart icinga2
Job for icinga2.service failed. See 'systemctl status icinga2.service' and 'journalctl -xn' for details.
If you're stuck with configuration errors, you can manually invoke the configuration validation.
On FreeBSD you need to enable icinga2 in your rc.conf
# sysrc icinga2_enable=yes
# service icinga2 restart
Icinga 2 ships configuration examples for syntax highlighting using the vim and nano editors.
The RHEL, SUSE and Debian package icinga2-common install these files into
/usr/share/*/icinga2-common/syntax. Sources provide these files in tools/syntax.
Create a new local vim configuration storage, if not already existing.
Edit vim/ftdetect/icinga2.vim if your paths to the Icinga 2 configuration
differ.
$ PREFIX=~/.vim
$ mkdir -p $PREFIX/{syntax,ftdetect}
$ cp vim/syntax/icinga2.vim $PREFIX/syntax/
$ cp vim/ftdetect/icinga2.vim $PREFIX/ftdetect/
Test it:
$ vim /etc/icinga2/conf.d/templates.conf
Copy the /etc/nanorc sample file to your home directory. Create the /etc/nano directory
and copy the provided icinga2.nanorc into it.
$ cp /etc/nanorc ~/.nanorc
# mkdir -p /etc/nano
# cp icinga2.nanorc /etc/nano/
Then include the icinga2.nanorc file in your ~/.nanorc by adding the following line:
$ vim ~/.nanorc
## Icinga 2
include "/etc/nano/icinga2.nanorc"
Test it:
$ nano /etc/icinga2/conf.d/templates.conf
Icinga 2 can be used with Icinga Web 2 and a number of other web interfaces. This chapter explains how to set up Icinga Web 2. The Alternative Frontends chapter can be used as a starting point for installing some of the other web interfaces which are also available.
The DB IDO (Database Icinga Data Output) modules for Icinga 2 take care of exporting all configuration and status information into a database. The IDO database is used by a number of projects including Icinga Web 2, Icinga Reporting or Icinga Web 1.x.
There is a separate module for each database backend. At present support for both MySQL and PostgreSQL is implemented.
Debian/Ubuntu:
# apt-get install mysql-server mysql-client
RHEL/CentOS 5/6:
# yum install mysql-server mysql
# chkconfig mysqld on
# service mysqld start
# mysql_secure_installation
RHEL/CentOS 7 and Fedora:
# yum install mariadb-server mariadb
# systemctl enable mariadb
# systemctl start mariadb
# mysql_secure_installation
SUSE:
# zypper install mysql mysql-client
# chkconfig mysqld on
# service mysqld start
FreeBSD:
# pkg install mysql56-server
# sysrc mysql_enable=yes
# service mysql-server restart
# mysql_secure_installation
The next step is to install the icinga2-ido-mysql package using your
distribution's package manager.
Debian/Ubuntu:
# apt-get install icinga2-ido-mysql
RHEL/CentOS:
# yum install icinga2-ido-mysql
SUSE:
# zypper install icinga2-ido-mysql
FreeBSD:
On FreeBSD the IDO modules for MySQL are included with the icinga2 package and located at /usr/local/share/icinga2-ido-mysql/schema/mysql.sql
Note
The Debian/Ubuntu packages provide a database configuration wizard by default. You can skip the automated setup and install/upgrade the database manually if you prefer that.
Set up a MySQL database for Icinga 2:
# mysql -u root -p
mysql> CREATE DATABASE icinga;
GRANT SELECT, INSERT, UPDATE, DELETE, DROP, CREATE VIEW, INDEX, EXECUTE ON icinga.* TO 'icinga'@'localhost' IDENTIFIED BY 'icinga';
After creating the database you can import the Icinga 2 IDO schema using the following command:
# mysql -u root -p icinga < /usr/share/icinga2-ido-mysql/schema/mysql.sql
The package provides a new configuration file that is installed in
/etc/icinga2/features-available/ido-mysql.conf. You will need to
update the database credentials in this file.
All available attributes are explained in the IdoMysqlConnection object chapter.
You can enable the ido-mysql feature configuration file using
icinga2 feature enable:
# icinga2 feature enable ido-mysql
Module 'ido-mysql' was enabled.
Make sure to restart Icinga 2 for these changes to take effect.
After enabling the ido-mysql feature you have to restart Icinga 2:
Debian/Ubuntu, RHEL/CentOS 6 and SUSE:
# service icinga2 restart
RHEL/CentOS 7 and Fedora:
# systemctl restart icinga2
FreeBSD:
# service icinga2 restart
Debian/Ubuntu:
# apt-get install postgresql
RHEL/CentOS 5/6:
# yum install postgresql-server postgresql
# chkconfig postgresql on
# service postgresql start
RHEL/CentOS 7:
# yum install postgresql-server postgresql
# postgresql-setup --initdb
# systemctl enable postgresql
# systemctl start postgresql
SUSE:
# zypper install postgresql postgresql-server
# chkconfig postgresql on
# service postgresql start
FreeBSD:
# pkg install postgresql93-server
# sysrc postgresql_enable=yes
# service postgresql start
The next step is to install the icinga2-ido-pgsql package using your
distribution's package manager.
Debian/Ubuntu:
# apt-get install icinga2-ido-pgsql
RHEL/CentOS:
# yum install icinga2-ido-pgsql
SUSE:
# zypper install icinga2-ido-pgsql
FreeBSD:
On FreeBSD the IDO modules for PostgreSQL are included with the icinga2 package and located at /usr/local/share/icinga2-ido-pgsql/schema/pgsql.sql
Note
Upstream Debian packages provide a database configuration wizard by default. You can skip the automated setup and install/upgrade the database manually if you prefer that.
Set up a PostgreSQL database for Icinga 2:
# cd /tmp
# sudo -u postgres psql -c "CREATE ROLE icinga WITH LOGIN PASSWORD 'icinga'";
# sudo -u postgres createdb -O icinga -E UTF8 icinga
# sudo -u postgres createlang plpgsql icinga
Note
When using PostgreSQL 9.x you can omit the
createlangcommand.
Locate your pg_hba.conf (Debian: /etc/postgresql/*/main/pg_hba.conf,
RHEL/SUSE: /var/lib/pgsql/data/pg_hba.conf), add the icinga user with md5
authentication method and restart the postgresql server.
# vim /var/lib/pgsql/data/pg_hba.conf
# icinga
local icinga icinga md5
host icinga icinga 127.0.0.1/32 md5
host icinga icinga ::1/128 md5
# "local" is for Unix domain socket connections only
local all all ident
# IPv4 local connections:
host all all 127.0.0.1/32 ident
# IPv6 local connections:
host all all ::1/128 ident
# service postgresql restart
After creating the database and permissions you can import the Icinga 2 IDO schema using the following command:
# export PGPASSWORD=icinga
# psql -U icinga -d icinga < /usr/share/icinga2-ido-pgsql/schema/pgsql.sql
The package provides a new configuration file that is installed in
/etc/icinga2/features-available/ido-pgsql.conf. You will need to update
the database credentials in this file.
All available attributes are explained in the IdoPgsqlConnection object chapter.
You can enable the ido-pgsql feature configuration file using
icinga2 feature enable:
# icinga2 feature enable ido-pgsql
Module 'ido-pgsql' was enabled.
Make sure to restart Icinga 2 for these changes to take effect.
After enabling the ido-pgsql feature you have to restart Icinga 2:
Debian/Ubuntu, RHEL/CentOS 6, SUSE and FreeBSD:
# service icinga2 restart
RHEL/CentOS 7 and Fedora:
# systemctl restart icinga2
Debian/Ubuntu:
# apt-get install apache2
RHEL/CentOS 6:
# yum install httpd
# chkconfig httpd on
# service httpd start
RHEL/CentOS 7/Fedora:
# yum install httpd
# systemctl enable httpd
# systemctl start httpd
SUSE:
# zypper install apache2
# chkconfig on
# service apache2 start
FreeBSD (nginx, but you could also use the apache24 package):
# pkg install nginx php56-gettext php56-ldap php56-openssl php56-mysql php56-pdo_mysql php56-pgsql php56-pdo_pgsql php56-sockets php56-gd pecl-imagick pecl-intl
# sysrc php_fpm_enable=yes
# sysrc nginx_enable=yes
# sed -i '' "s/listen\ =\ 127.0.0.1:9000/listen\ =\ \/var\/run\/php5-fpm.sock/" /usr/local/etc/php-fpm.conf
# sed -i '' "s/;listen.owner/listen.owner/" /usr/local/etc/php-fpm.conf
# sed -i '' "s/;listen.group/listen.group/" /usr/local/etc/php-fpm.conf
# sed -i '' "s/;listen.mode/listen.mode/" /usr/local/etc/php-fpm.conf
# service php-fpm start
# service nginx start
Example:
# iptables -A INPUT -p tcp -m tcp --dport 80 -j ACCEPT
# service iptables save
RHEL/CentOS 7 specific:
# firewall-cmd --add-service=http
# firewall-cmd --permanent --add-service=http
FreeBSD: Please consult the FreeBSD Handbook how to configure one of FreeBSD's firewalls.
Web interfaces and other Icinga addons are able to send commands to Icinga 2 through the external command pipe.
You can enable the External Command Pipe using the CLI:
# icinga2 feature enable command
After that you will have to restart Icinga 2:
Debian/Ubuntu, RHEL/CentOS 6 and SUSE:
# service icinga2 restart
RHEL/CentOS 7 and Fedora:
# systemctl restart icinga2
FreeBSD:
# service icinga2 restart
By default the command pipe file is owned by the group icingacmd with
read/write permissions. Add your webserver's user to the group icingacmd to
enable sending commands to Icinga 2 through your web interface:
# usermod -a -G icingacmd www-data
FreeBSD:
On FreeBSD the rw directory is owned by the group www. You do not need to add the
user icinga to the group www.
Debian packages use nagios as the default user and group name. Therefore
change icingacmd to nagios.
The webserver's user is different between distributions so you might have to
change www-data to wwwrun, www, or apache.
Change "www-data" to the user you're using to run queries.
You can verify that the user has been successfully added to the icingacmd
group using the id command:
$ id <your-webserver-user>
Please consult the installation documentation for further instructions on how to install Icinga Web 2.
A number of additional features are available in the form of addons. A list of popular addons is available in the Addons and Plugins chapter.