The preferred way of installing Icinga Web 2 is to use the official package repositories depending on which operating system and distribution you are running. But it is also possible to install Icinga Web 2 directly from source.
In case you are upgrading from an older version of Icinga Web 2 please make sure to read the upgrading section thoroughly.
- A web server, e.g. Apache or nginx
- PHP >= 5.3.0 w/ gettext, intl and OpenSSL support
- LDAP PHP library when using Active Directory or LDAP for authentication
- Icinga 1.x w/ IDO; Icinga 2.x w/ IDO feature enabled
- The IDO table prefix must be icinga_ which is the default
- MySQL or PostgreSQL PHP libraries
- cURL PHP library when using the Icinga 2 API for transmitting external commands
It seems that Web 2 is not compatible with the PageSpeed module. Please disable the PageSpeed module using one of the following methods.
Apache:
ModPagespeedDisallow "*/icingaweb2/*"
Nginx:
pagespeed Disallow "*/icingaweb2/*";
Below is a list of official package repositories for installing Icinga Web 2 for various operating systems.
| Distribution | Repository |
|---|---|
| Debian | Icinga Repository |
| Ubuntu | Icinga Repository |
| RHEL/CentOS | Icinga Repository |
| openSUSE | Icinga Repository |
| SLES | Icinga Repository |
| Gentoo | Upstream |
| FreeBSD | Upstream |
| ArchLinux | Upstream |
Packages for distributions other than the ones listed above may also be available. Please contact your distribution packagers.
You need to add the Icinga repository to your package management configuration for installing Icinga Web 2. If you've already configured your OS to use the Icinga repository for installing Icinga 2, you may skip this step. Below is a list with examples for various distributions.
Debian Jessie:
wget -O - http://packages.icinga.org/icinga.key | apt-key add -
echo 'deb http://packages.icinga.org/debian icinga-jessie main' >/etc/apt/sources.list.d/icinga.list
apt-get update
INFO
For other Debian versions just replace jessie with your distribution's code name.
Ubuntu Xenial:
wget -O - http://packages.icinga.org/icinga.key | apt-key add -
add-apt-repository 'deb http://packages.icinga.org/ubuntu icinga-xenial main'
apt-get update
INFO
For other Ubuntu versions just replace xenial with your distribution's code name.
RHEL and CentOS:
rpm --import http://packages.icinga.org/icinga.key
curl -o /etc/yum.repos.d/ICINGA-release.repo http://packages.icinga.org/epel/ICINGA-release.repo
yum makecache
Fedora:
rpm --import http://packages.icinga.org/icinga.key
curl -o /etc/yum.repos.d/ICINGA-release.repo http://packages.icinga.org/fedora/ICINGA-release.repo
yum makecache
SLES 11:
zypper ar http://packages.icinga.org/SUSE/ICINGA-release-11.repo
zypper ref
SLES 12:
zypper ar http://packages.icinga.org/SUSE/ICINGA-release.repo
zypper ref
openSUSE:
zypper ar http://packages.icinga.org/openSUSE/ICINGA-release.repo
zypper ref
The packages for RHEL/CentOS depend on other packages which are distributed as part of the EPEL repository. Please make sure to enable this repository by following these instructions.
Please note that installing Icinga Web 2 on RHEL/CentOS 5 is not supported due to EOL versions of PHP and PostgreSQL.
You can install Icinga Web 2 by using your distribution's package manager to install the icingaweb2 package.
Below is a list with examples for various distributions. The additional package icingacli is necessary on RPM based systems for being able to follow further steps in this guide. In DEB based systems, the icingacli binary is included in the icingaweb2 package.
Debian and Ubuntu:
apt-get install icingaweb2
RHEL, CentOS and Fedora:
yum install icingaweb2 icingacli
For RHEL/CentOS please read the package repositories notes.
SLES and openSUSE:
zypper install icingaweb2 icingacli
You can set up Icinga Web 2 quickly and easily with the Icinga Web 2 setup wizard which is available the first time
you visit Icinga Web 2 in your browser. When using the web setup you are required to authenticate using a token.
In order to generate a token use the icingacli:
icingacli setup token create
In case you do not remember the token you can show it using the icingacli:
icingacli setup token show
Finally visit Icinga Web 2 in your browser to access the setup wizard and complete the installation:
/icingaweb2/setup.
Although the preferred way of installing Icinga Web 2 is to use packages, it is also possible to install Icinga Web 2 directly from source.
First of all, you need to download the sources. Icinga Web 2 is available through a Git repository. You can clone this repository either via git or http protocol using the following URLs:
- git://git.icinga.org/icingaweb2.git
- http://git.icinga.org/icingaweb2.git
There is also a browsable version available at git.icinga.org. This version also offers snapshots for easy download which you can use if you do not have git present on your system.
git clone git://git.icinga.org/icingaweb2.git
You will need to install certain dependencies depending on your setup listed here.
The following example installs Apache2 as web server, MySQL as RDBMS and uses the PHP adapter for MySQL. Adopt the package requirements to your needs (e.g. adding ldap for authentication) and distribution.
Example for RHEL/CentOS/Fedora:
yum install httpd mysql-server
yum install php php-gd php-intl php-ZendFramework php-ZendFramework-Db-Adapter-Pdo-Mysql
The setup wizard will check the pre-requisites later on.
Choose a target directory and move Icinga Web 2 there.
mv icingaweb2 /usr/share/icingaweb2
Use icingacli to generate web server configuration for either Apache or nginx.
Apache:
./bin/icingacli setup config webserver apache --document-root /usr/share/icingaweb2/public
nginx:
./bin/icingacli setup config webserver nginx --document-root /usr/share/icingaweb2/public
Save the output as new file in your webserver's configuration directory.
Example for Apache on RHEL or CentOS:
./bin/icingacli setup config webserver apache --document-root /usr/share/icingaweb2/public > /etc/httpd/conf.d/icingaweb2.conf
Example for Apache on SUSE:
./bin/icingacli setup config webserver apache --document-root /usr/share/icingaweb2/public > /etc/apache2/conf.d/icingaweb2.conf
Example for Apache on Debian Jessie:
./bin/icingacli setup config webserver apache --document-root /usr/share/icingaweb2/public > /etc/apache2/conf-available/icingaweb2.conf
a2enconf icingaweb2
You can set up Icinga Web 2 quickly and easily with the Icinga Web 2 setup wizard which is available the first time you visit Icinga Web 2 in your browser. Please follow the steps listed below for preparing the web setup.
Because both web and CLI must have access to configuration and logs, permissions will be managed using a special system group. The web server user and CLI user have to be added to this system group.
Add the system group icingaweb2 in the first place.
Fedora, RHEL, CentOS, SLES and OpenSUSE:
groupadd -r icingaweb2
Debian and Ubuntu:
addgroup --system icingaweb2
Add your web server's user to the system group icingaweb2
and restart the web server:
Fedora, RHEL and CentOS:
usermod -a -G icingaweb2 apache
service httpd restart
SLES and OpenSUSE:
usermod -A icingaweb2 wwwrun
service apache2 restart
Debian and Ubuntu:
usermod -a -G icingaweb2 www-data
service apache2 restart
Use icingacli to create the configuration directory which defaults to /etc/icingaweb2:
./bin/icingacli setup config directory
When using the web setup you are required to authenticate using a token. In order to generate a token use the
icingacli:
./bin/icingacli setup token create
In case you do not remember the token you can show it using the icingacli:
./bin/icingacli setup token show
Finally visit Icinga Web 2 in your browser to access the setup wizard and complete the installation:
/icingaweb2/setup.
Paste the previously generated token and follow the steps on-screen. Then you are done here.
If you have chosen not to run the setup wizard, you will need further knowledge about
- manual creation of the Icinga Web 2 database
icingaweb2including a default user (optional as authentication and session backend) - additional configuration for the application
- additional configuration for the monitoring module (e.g. the IDO database and external command pipe from Icinga 2)
This comes in handy if you are planning to deploy Icinga Web 2 automatically using Puppet, Ansible, Chef, etc. modules.
Warning
Read the documentation on the respective linked configuration sections before deploying the configuration manually.
If you are unsure about certain settings, use the setup wizard once and then collect the generated configuration as well as sql dumps.
Create the database and add a new user as shown below for MySQL:
sudo mysql -p
CREATE DATABASE icingaweb2;
GRANT SELECT, INSERT, UPDATE, DELETE, DROP, CREATE VIEW, INDEX, EXECUTE ON icingaweb2.* TO 'icingaweb2'@'localhost' IDENTIFIED BY 'icingaweb2';
quit
mysql -p icingaweb2 < /usr/share/icingaweb2/etc/schema/mysql.schema.sql
Then generate a new password hash as described in the authentication docs
and use it to insert a new user called icingaadmin into the database.
mysql -p icingaweb2
INSERT INTO icingaweb_user (name, active, password_hash) VALUES ('icingaadmin', 1, '$1$EzxLOFDr$giVx3bGhVm4lDUAw6srGX1');
quit
resources.ini providing the details for the Icinga Web 2 and Icinga 2 IDO database configuration. Example for MySQL:
vim /etc/icingaweb2/resources.ini
[icingaweb2]
type = "db"
db = "mysql"
host = "localhost"
port = "3306"
dbname = "icingaweb2"
username = "icingaweb2"
password = "icingaweb2"
[icinga2]
type = "db"
db = "mysql"
host = "localhost"
port = "3306"
dbname = "icinga"
username = "icinga"
password = "icinga"
config.ini defining general application settings.
vim /etc/icingaweb2/config.ini
[logging]
log = "syslog"
level = "ERROR"
application = "icingaweb2"
[preferences]
type = "db"
resource = "icingaweb2"
authentication.ini for e.g. using the previously created database.
vim /etc/icingaweb2/authentication.ini
[icingaweb2]
backend = "db"
resource = "icingaweb2"
roles.ini granting the previously added icingaadmin user all permissions.
vim /etc/icingaweb2/roles.ini
[admins]
users = "icingaadmin"
permissions = "*"
config.ini defining additional security settings.
vim /etc/icingaweb2/modules/monitoring/config.ini
[security]
protected_customvars = "*pw*,*pass*,community"
backends.ini referencing the Icinga 2 DB IDO resource.
vim /etc/icingaweb2/modules/monitoring/backends.ini
[icinga2]
type = "ido"
resource = "icinga2"
commandtransports.ini defining the Icinga command pipe.
vim /etc/icingaweb2/modules/monitoring/commandtransports.ini
[icinga2]
transport = "local"
path = "/var/run/icinga2/cmd/icinga2.cmd"
Finally visit Icinga Web 2 in your browser to login as icingaadmin user: /icingaweb2.
- Icinga Web 2 version 2.3.x does not introduce any backward incompatible change.
- The menu entry
AuthorizationbeneathConfighas been renamed toAuthentication. The role, user backend and user group backend configuration which was previously found beneathAuthenticationhas been moved toApplication.
- Since Icinga Web 2 version 2.1.3 LDAP user group backends respect the configuration option
group_filter. Users who changed the configuration manually and used the optionfilterinstead have to change it back togroup_filter.
-
Icinga Web 2 installations from package on RHEL/CentOS 7 now depend on
php-ZendFrameworkwhich is available through the EPEL repository. Before, Zend was installed as Icinga Web 2 vendor library through the packageicingaweb2-vendor-zend. After upgrading, please make sure to remove the packageicingaweb2-vendor-zend. -
Icinga Web 2 version 2.0.0 requires permissions for accessing modules. Those permissions are automatically generated for each installed module in the format
module/<moduleName>. Administrators have to grant the module permissions to users and/or user groups in the roles configuration for permitting access to specific modules. In addition, restrictions provided by modules are now configurable for each installed module too. Before, a module had to be enabled before having the possibility to configure restrictions. -
The instances.ini configuration file provided by the monitoring module has been renamed to commandtransports.ini. The content and location of the file remains unchanged.
-
The location of a user's preferences has been changed from <config-dir>/preferences/<username>.ini to <config-dir>/preferences/<username>/config.ini. The content of the file remains unchanged.
The first release candidate of Icinga Web 2 introduces the following non-backward compatible changes:
-
The database schema has been adjusted and the tables
icingaweb_groupandicingaweb_group_membershipwere altered to ensure referential integrity. Please use the upgrade script located in etc/schema/ to update your database schema -
Users who are using PostgreSQL < v9.1 are required to upgrade their environment to v9.1+ as this is the new minimum required version for utilizing PostgreSQL as database backend
-
The restrictions
monitoring/hosts/filterandmonitoring/services/filterprovided by the monitoring module were merged together. The new restriction is calledmonitoring/filter/objectsand supports only a predefined subset of filter columns. Please see the module's security related documentation for more details.
Because Icinga Web 2 Beta 3 does not introduce any backward incompatible change you don't have to change your configuration files after upgrading to Icinga Web 2 Beta 3.
Icinga Web 2 Beta 2 introduces access control based on roles for secured actions. If you've already set up Icinga Web 2, you are required to create the file roles.ini beneath Icinga Web 2's configuration directory with the following content:
[administrators]
users = "your_user_name, another_user_name"
permissions = "*"
After please log out from Icinga Web 2 and log in again for having all permissions granted.
If you delegated authentication to your web server using the autologin backend, you have to switch to the external
authentication backend to be able to log in again. The new name better reflects
what's going on. A similar change
affects environments that opted for not storing preferences, your new backend is none.