The Infineon CYW955572BTEVK-01 Evaluation Kit enables you to evaluate and develop Bluetooth® applications using the AIROC™ CYW55572 high-performance Wi-Fi 6/6E (11ax) and Bluetooth® combo. The CYW5557x product family includes an integrated Bluetooth® subsystem with Arm® Cortex®-M33 supporting BR/EDR/Bluetooth® and isochronous channels for LE audio. This kit helps evaluate, develop, and debug embdedded Bluetooth® applications quickly for faster time-to-market.
- AIROC™ CYW55572 Wi-Fi 6 (11ax) + Bluetooth® combo chip
- Audio Arduino shield with on-board analog microphones, audio codec chip, headphone, and speaker output
- On-board sensors - an ambient light sensor, thermistor, and footprint for an Infineon digital microphone
- USB connector for power, programming, and USB-UART bridge
- CYW9BTM2BASE1 base board
- CYW955572M2BT1LV radio card (mounted on the base board)
- CYW9BT Audio 3 Arduino shield
- USB Standard-A to Micro-B cable
- Power Adapter
- Max UART baud rate is 3M.
The CYW955572BTEVK-01 is used with the audio shield board and the CUSTOM button on the shield board is configured for input by default.
The Infineon CYW955572BTEVK-01 Evaluation Kit is enabled for programming for only a few seconds after a recovery reset. For best programming results, add "UART=COMXX" (or "UART=/dev/ttyXX" for Linux or macOS) to the application makefile, replacing "UART=AUTO". Replace XX with the proper HCI port name that is attached to the kit. This will skip the serial device port scan and begin the CYW55572 device programming immediately.