Merge branch 'develop' of JF/PineTime into master

CMakeLists.txt

@@ -1,5 +1,5 @@
 cmake_minimum_required(VERSION 3.10)
-project(pinetime VERSION 0.14.0 LANGUAGES C CXX ASM)
+project(pinetime VERSION 0.14.1 LANGUAGES C CXX ASM)
 
 set(NRF_TARGET "nrf52")
 
@@ -41,6 +41,10 @@ if(DEFINED USE_DEBUG_PINS AND USE_DEBUG_PINS)
   add_definitions(-DUSE_DEBUG_PINS)
 endif()
 
+if(BUILD_DFU)
+  set(BUILD_DFU true)
+endif()
+
 message("BUILD CONFIGURATION")
 message("-------------------")
 message("    * Version : " ${PROJECT_VERSION_MAJOR}.${PROJECT_VERSION_MINOR}.${PROJECT_VERSION_PATCH})
@@ -62,6 +66,11 @@ if(USE_DEBUG_PINS)
 else()
   message("    * Debug pins : Disabled")
 endif()
+if(BUILD_DFU)
+  message("    * Build DFU (using adafruit-nrfutil) : Enabled")
+else()
+  message("    * Build DFU (using adafruit-nrfutil) : Disabled")
+endif()
 
 set(VERSION_EDIT_WARNING "// Do not edit this file, it is automatically generated by CMAKE!")
 configure_file(${CMAKE_CURRENT_SOURCE_DIR}/src/Version.h.in ${CMAKE_CURRENT_SOURCE_DIR}/src/Version.h)

README.md

@@ -24,7 +24,8 @@ The goal of this project is to design an open-source firmware for the Pinetime s
 
 ## Overview
 
-![Pinetime screens](images/0.7.0/montage.jpg "PinetimeScreens")
+![Pinetime screens](images/0.14.0/collage1.png "PinetimeScreens")
+![Pinetime screens](images/0.14.0/collage2.png "PinetimeScreens")
 
 As of now, here is the list of achievements of this project:
 
@@ -46,6 +47,7 @@ As of now, here is the list of achievements of this project:
  - Supported by 2 companion apps (development is in progress):
     * [Gadgetbridge](https://codeberg.org/Freeyourgadget/Gadgetbridge/) (on Android)
     * [Amazfish](https://openrepos.net/content/piggz/amazfish) (on SailfishOS and Linux)
+    * **[Experimental]** [WebBLEWatch](https://hubmartin.github.io/WebBLEWatch/) Synchronize time directly from your web browser. [video](https://youtu.be/IakiuhVDdrY)
  - **[Experimental]** OTA (Over-the-air) update via BLE
  - **[Experimental]** Bootloader based on [MCUBoot](https://juullabs-oss.github.io/mcuboot/)
 

doc/buildAndProgram.md

@@ -26,7 +26,10 @@ CMake configures the project according to variables you specify the command line
 **NRFJPROG**|Path to the NRFJProg executable. Used only if `USE_JLINK` is 1.|`-DNRFJPROG=/opt/nrfjprog/nrfjprog`
 **GDB_CLIENT_BIN_PATH**|Path to arm-none-eabi-gdb executable. Used only if `USE_GDB_CLIENT` is 1.|`-DGDB_CLIENT_BIN_PATH=/home/jf/nrf52/gcc-arm-none-eabi-9-2019-q4-major/bin/arm-none-eabi-gdb`
 **GDB_CLIENT_TARGET_REMOTE**|Target remote connection string. Used only if `USE_GDB_CLIENT` is 1.|`-DGDB_CLIENT_TARGET_REMOTE=/dev/ttyACM0`
+**BUILD_DFU (\*)**|Build DFU files while building (needs [adafruit-nrfutil](https://github.com/adafruit/Adafruit_nRF52_nrfutil)).|`-BUILD_DFU=1`
 
+####(*) Note about **BUILD_DFU**:
+DFU files are the files you'll need to install your build of InfiniTime using OTA (over-the-air) mecanism. To generate the DFU file, the Python tool [adafruit-nrfutil](https://github.com/adafruit/Adafruit_nRF52_nrfutil) is needed on your system. Check that this tool is properly installed before enabling this option.
 
 #### CMake command line for JLink
 ```
@@ -45,11 +48,14 @@ cmake -DARM_NONE_EABI_TOOLCHAIN_PATH=... -DNRF5_SDK_PATH=... -DUSE_OPENOCD=1 -DG
 
 ### Build the project
 During the project generation, CMake created the following targets:
-- FLASH_ERASE : mass erase the flash memory of the NRF52.
-- FLASH_pinetime-app : flash the firmware into the NRF52.
-- pinetime-app : build the standalone (without bootloader support) version of the firmware.
-- pinetime-mcuboot-app : build the firmware with the support of the bootloader (based on MCUBoot).
-- pinetime-graphics : small firmware that writes the boot graphics into the SPI flash.
+- **FLASH_ERASE** : mass erase the flash memory of the NRF52.
+- **FLASH_pinetime-app** : flash the firmware into the NRF52.
+- **pinetime-app** : build the standalone (without bootloader support) version of the firmware.
+- **pinetime-recovery** : build the standalone recovery version of infinitime (light firmware that only supports OTA and basic UI)
+- **pinetime-recovery-loader** : build the standalone tool that flashes the recovery firmware into the external SPI flash
+- **pinetime-mcuboot-app** : build the firmware with the support of the bootloader (based on MCUBoot).
+- **pinetime-mcuboot-recovery** : build pinetime-recovery with bootloader support
+- **pinetime-mcuboot-recovery-loader** : build pinetime-recovery-loader with bootloader support
 
 If you just want to build the project and run it on the Pinetime, using *pinetime-app* is recommanded. See [this page](../bootloader/README.md) for more info about bootloader support.
 
@@ -64,8 +70,11 @@ Binary files are generated into the folder `src`:
  - **pinetime-app.map** : map file
  - **pinetime-mcuboot-app.bin, .hex and .out** : firmware with bootloader support in bin, hex and out formats.
  - **pinetime-mcuboot-app.map** : map file
- - **pinetime-graphics.bin, .hex and .out** : firmware for the boot graphic in bin, hex and out formats.
- - **pinetime-graphics.map** : map file
+ - **pinetime-mcuboot-app-image** : MCUBoot image of the firmware
+ - **pinetime-mcuboot-ap-dfu** : DFU file of the firmware
+
+The same files are generated for **pinetime-recovery** and **pinetime-recoveryloader** 
+
 
 ### Program and run
 #### Using CMake targets

docker/Dockerfile

@@ -17,7 +17,8 @@ RUN apt-get update -qq \
 # aarch64 packages
       libffi-dev \
       libssl-dev \
-      python3-dev \ 
+      python3-dev \
+      python \
     && rm -rf /var/cache/apt/* /var/lib/apt/lists/*;
 
 RUN pip3 install adafruit-nrfutil

docker/build.sh

@@ -63,6 +63,7 @@ CmakeGenerate() {
     -DUSE_OPENOCD=1 \
     -DARM_NONE_EABI_TOOLCHAIN_PATH="$TOOLS_DIR/$GCC_ARM_VER" \
     -DNRF5_SDK_PATH="$TOOLS_DIR/$NRF_SDK_VER" \
+    -DBUILD_DFU=1 \
     "$SOURCES_DIR"
   cmake -L -N .
 }

docker/post_build.sh.in

@@ -9,15 +9,12 @@ export PROJECT_VERSION="@PROJECT_VERSION_MAJOR@.@PROJECT_VERSION_MINOR@.@PROJECT
 mkdir -p "$OUTPUT_DIR"
 
 cp "$SOURCES_DIR"/bootloader/bootloader-5.0.4.bin $OUTPUT_DIR/bootloader.bin
+cp "$BUILD_DIR/src/pinetime-mcuboot-app-image-$PROJECT_VERSION.bin" "$OUTPUT_DIR/pinetime-mcuboot-app-image-$PROJECT_VERSION.bin"
+cp "$BUILD_DIR/src/pinetime-mcuboot-app-dfu-$PROJECT_VERSION.zip" "$OUTPUT_DIR/pinetime-mcuboot-app-dfu-$PROJECT_VERSION.zip"
 
-"$TOOLS_DIR"/mcuboot/scripts/imgtool.py create --version 1.0.0 \
-    --align 4 --header-size 32 --slot-size 475136 --pad-header \
-    "$BUILD_DIR/src/pinetime-mcuboot-app-$PROJECT_VERSION.bin" \
-    "$OUTPUT_DIR/image-$PROJECT_VERSION.bin"
+cp "$BUILD_DIR/src/pinetime-mcuboot-recovery-loader-image-$PROJECT_VERSION.bin" "$OUTPUT_DIR/pinetime-mcuboot-recovery-loader-image-$PROJECT_VERSION.bin"
+cp "$BUILD_DIR/src/pinetime-mcuboot-recovery-loader-dfu-$PROJECT_VERSION.zip" "$OUTPUT_DIR/pinetime-mcuboot-recovery-loader-dfu-$PROJECT_VERSION.zip"
 
-adafruit-nrfutil dfu genpkg --dev-type 0x0052 \
-    --application "$OUTPUT_DIR/image-$PROJECT_VERSION.bin" \
-    "$OUTPUT_DIR/dfu-$PROJECT_VERSION.zip"
 
 mkdir -p "$OUTPUT_DIR/src"
 cd "$BUILD_DIR"