circles 1.6.1

Minor update to add midi continue support.

• Added two new params; midi continue device and midi continue mode
  • Midi continue device lets you choose which device to listen for "continue" messages from; This allows you to choose a different midi device for "continue" messages than the device you're sending midi out messages to
  • Midi continue mode lets you choose if new "continue" messages always start playback or toggle so you can use it as a play/pause button
• Grouped new params in "midi continue" group

circles 1.6

This is a pretty major update under the hood. Because of that I took this as an opportunity to update some of the param IDs. This means that existing PSETs will probably result in unexpected behavior.

Before updating, if you have any saved PSETs that you rely on, I'd encourage you to write down the settings so you can recreate them after updating.

• Finally switched from using the old-school beatclock to the new hotness, clock.
• Added midi-in transport controls; circles will now start/stop when the midi leader starts and stops.
• MIDI out device shows name in params menu
• Updated order of outputs param list; This will probably cause issues with any existing PSETs
• Cleaned up params menu by grouping some params
• Added new "step division" param

circles 1.5.1

This is a quick update to fix the broken clock. I'm still not using the system provided "CLOCK" info, but my local "clock" sources should work again.

circles 1.5

Added MIDI support.
Added scale selection.

circles 1.4

Added Crow + Just Friends support. Please make sure to update your crow and Norns to the latest firmware.

circles 1.3

Circles now supports the system saving/loading of params. See the PARAMETERS section of https://monome.org/docs/norns/ for more information.

circles 1.2

Added deterministic burst type option. This should allow for more loop like rhythms.

circles 1.1

Added crow support.

Added params for output; audio or crow. If crow:

• Output 1: Trigger
• Output 2: Pitch
• Output 3: Y Pos (0 - 10V)
• Output 4: Radius (0 - 10V)
  Added params for clock; midi or crow. Crow accepts clock on input 2. I would like this to be on input 1, but there is currently a bug with norns or crow mentioned here (https://llllllll.co/t/crow-help-norns/25863/10).

circles 1.0

Initial release.

ENC 2 & 3 move cursor
ENC 1: engine.cutoff

KEY 3: Place circle
KEY 2: Remove circle at cursor
KEY 1: Hold removes all circles

Notes divided along screen x
Timbre divided along screen y
Bigger circles, longer release

Enjoy