qw230.txt

           ----------------------------------------------
            QuakeWorld v2.30 Release Notes (Aug 26,1998)
           ----------------------------------------------
              Copyright id Software 1996, 1997, 1998

                     Programmers:
                  Dave 'Zoid' Kirsch
                http://www.quakeworld.net/
                  zoid@idsoftware.com

                 Jack 'Morbid' Mathews
                 http://www.gamespy.com
                   jack@gamespy.com

2.30 Changes to QuakeWorld Server
---------------------------------

- Fixed many of the overflow problems found in 2.2x
- Minor fixes to player movement code
- sv_mapcheck defautls to on

2.30 Chanes to QuakeWorld Client
--------------------------------

- "crosshaircolor" controls the color for the crosshair in "crosshair 2"
  Values are 0 through 255 and represent a color in the palette.
- "cl_chasecam 1" while in spectator mode gives a through-the-eyes view
  of the player.
- gl_cshiftpercent controls the blend precentage in GLQWCL (default 100).
- Packet loss meter added to player scoreboard, "PL" is the column title.
  This indicates the amount of packet loss the player is receiving.

2.21 Changes to QuakeWorld Server
---------------------------------

New:
- infokey(self, "ip") and infokey(self, "ping") return expected values as
strings (use stof for ping).
- sv_mapcheck controls map checksumming.  Vis data is not included in the
checksum with 2.21 clients.

Fixed/Changed:
- Proxy checksumming code changed to less CPU intensive algorithm.
- Fixed lots of overflow bugs (TF2.6 now works)
- Optimized some of the server code
- Server can accept 2.20 clients
- Movement bug on maps such as ctf4 and the lip by the outside 100health on
dm3 fixed.

2.21 Changes to QuakeWorld Client
---------------------------------

New:
- CVar cl_maxfps added that controls the max fps rate independant of rate (it
defaults to zero, which means rate controlled).  PLEASE NOTE:  Setting
cl_maxfps to high values on a modem will OVERRUN YOUR MODEM and lag you since a
packet is sent every frame, resulting in your sending more data than your modem
can handle.  This is why fps was tied to rate in the first place.

Fixed/Changed:
- Demo recording lock ups fixed
- Map checks don't include vis data (only works on 2.21 servers)
- Client works on 2.20 and 2.21 servers
- Movement bug on maps such as ctf4 and the lip by the outside 100health on
dm3 fixed.
- Small bug in fov changes in glqwcl fixed (calculated fov span at wrong
point)
- Linux client was hard locked at 30fps, fixed

2.20 Changes to QuakeWorld Server
---------------------------------

New:
- Map checksumming.  Client map must match server.

Fixed/Changed:
- Packets are now restricted to 1500 bytes for broken routers.
- Server signon sequence changed to multipart due to new packet size
  limitations
- Challenge/response system to stop spoofing
- New internal port handling to route through broken NAT routers.
- Client userinfo spamming reduced
- Name changes are broadcast
- Player physics tuned to be more like original Quake
- Autoaim is off by default in the server (sv_aim 2)
- Serverinfo watervis controls whether clients with GLQWCL can enable
  r_wateralpha

2.20 Changes to QuakeWorld Client
---------------------------------

Fixed/Changed:
- Signon sequence changed to correspond to new server protocol
- Demos can now be initiated during a server connection

2.11 Changes to QuakeWorld Client
---------------------------------
New:
- You can now specify the size of the console in the GL version.  For example,
  if you want a 320x200 console, put "-conwidth 320" on the command line.
  -conheight is also supported, but if unspecified it will automatically use
  a 4:3 aspect.  I.e., -conwidth 512 defaults to -conheight 384.  In high
  resolution modes such as 800x600 and 1024x768, the console defaults to
  640x480, otherwise the font and status bar become too small to read.  If
  you do want a higher resolution console in those modes, specify it as well:
  glqwcl -width 800 -height 600 -conwidth 800
  Note that not all cards support modes higher than 640x480.
- GL_SGIS_multitexture is now supported.  This allows some hardware that can
  blend textures together to render the world in one pass instead of two
  (world textures for one pass, lightmaps for the second).  You need a card
  such as a 3DFX VooDoo with two TMU units in order to take advantage of
  this.  If you have the required hardware, you will get a 60 to 100%
  improvement in rendering speed.

Fixed/Changed:
- GL Sprite bug fixed

2.11 Changes to QuakeWorld Server
---------------------------------
- Win32 -heapsize <kb>/-mem <mb> options were broken

2.10 Changes to QuakeWorld Client
---------------------------------
New:
- Added alternate crosshair.  Enabled with "crosshair 2".

Fixed/Changed:
- Fixed prediction bug in spectator/camera view.  Camera will no longer try
  to view under platforms.  Water still confuses it.
- Fixed random crash/exit problem present in 2.0

2.10 Changes to QuakeWorld Server
---------------------------------
- Spectators are now indicated with a (s) on server console "status" command
- Fixed minor security hole

2.01 Changes to QuakeWorld Server
---------------------------------
New:
- Added SpectatorConnect, SpectatorThink and SpectatorDisconnect Quake-C
  functions.  They are empty shells for now (a example of moving spectators
  from point to point is included with impulse 1) but can be used in lots
  of ways.

Fixed/Changed:
- Fixed the crash bug with spectators
- Changed the death msgs in the Quake-C to fix the old bug of incorrect msgs
  when your weapon changed.  Minor things like if two guys with pentagrams
  telefrag, they both die (happens in deathmatch 4).  Thanks to Nolan 'Radix'
  Pflug <nolan@fyi.net> for diffs of the progs changes to get this worked out.
- Fixed the mipmapping color errors in the GL version

2.00 Changes to QuakeWorld Client
---------------------------------

New:
- Put support back in for -zone option
- Added rerecord <filename> to cause a reconnect with demo recording on the
  same server
- Added EF_BLUE and EF_RED for new GL light bubbles
- Made rocket trails fade out in GL
- Added NOSKINS 2 to use but not download skins
- Precalculate light bubble
- Translucent console (GL)
- 8bit 3DFX texture support.  reduces texture thrashing due to way less
  texture memory used.
- will work on pre 2.0 servers, but can cause minor movement errors due to
  differences in movement prediction
- support for server controlled maxspeed and gravity multiplier.
- added low/avg/high ping values to the showteamscores so an
  average team ping is calculated
- Added startup graphic banner
- add other player clip hulls to player prediction and local prediction
  this removes the problem of walking through other players and makes
  close combat a lot nicer.

Fixed/Changed:
- Using TexSubImage2D to upload partial lightmaps (GL)
- fixed resized console in gl version, had some dead space, so put a mini
  frag list on the bottom
- changed lightning in gl version so in default of gl_flashblend 1 you don't
  see your own light, so having the quad doesn't obscure your vision
- fixed dynamic lightning of alias models in gl version (players and what
  not were not lit up by dynamic lights)
- exiting the world in spectator mode is no longer lava red, but
  slime green.
- fixed the z-angle on entities (for example, the flag was rotated wrong)
  in GL version.
- Spectator camera changed from a free float to a locked camera that tracks

2.00 Changes to QuakeWorld Server
---------------------------------

New:
- Added flood procection to the server
  default is 4 lines in 8 secs, wait for 10 on activation
  Command to change is:  floodprot <lines> <time> <wait-time>
- Added localinfo.  32k of key=value storage.  Values are stored with the
  localinfo console command on the server, i.e.
      localinfo e1m1 e1m2
  localinfo is persistant from the life of the server (between maps)
  progs can access localinfo using infokey(world, "key") and set it using
      localcmd("localinfo ");
      localcmd(key);
      localcmd(" ");
      localcmd(value);
      localcmd("\n");
  values with spaces should be quoted
  If the same key exists in serverinfo and localinfo, serverinfo will override
  localinfo is not visible 'outside' the server
- Using localinfo, you can now configure a series of maps to run without
  editing the quake-c.  usage:  localinfo <from-map> <to-map>.  For example,
  to run a server that loops through e1m2, dm2, dm4 and dm6, try this:
        localinfo e1m2 dm2
        localinfo dm2 dm4
        localinfo dm4 dm6
        localinfo dm6 e1m2
  Note that the last one should loop back to the first, otherwise normal
  level changing applies.  Put the localinfo commands in the server.cfg
- Protocol has changed, old clients will no longer work.  changable move
  vars such as gravity, maxspeed, etc. are supported again
- Full server controlled localized client maxspeed and gravity is in
  Create to new fields in the QC, .float gravity and .float maxspeed.
  .maxspeed defaults to sv_maxspeed (320), .gravity defaults to 1.0
  (full gravity).
  Change them at will in the QC, but don't change them too often as every
  change is noted and the clients are updated with the change so that
  their prediction works correctly.  The per-client maxspeed should be
  very handy for the TF guys.
- added support for 'namefun' (high bit characters).  On by default, server
  operators can turn it off with sv_highchars 0

Fixed/Changed:
- sv_friction defaults to 6 as in previous QuakeWorld release.  Regular Quake
  uses a default friction of 4, so if the server op wants Regular Quake
  behavior, he can change it to 4.
- fixed 'download ./server.cfg' security bug.
- fixed up ramp movement (on ground stuff)
- removed password from userinfo after player connect so that other
  players and spectators can't use the 'user' command to see the
  passwd
- setting password or spectator_password to 'none' is the same as
  clearing it
- change player move physics to support ramp accel, there was a bug in
  stair stepping that prevented proper movement.  With this bug, you can't
  jump into the RL room on dm6, or hit the secret light on e4m1.

1.64 Changes to QuakeWorld Client
---------------------------------
New:
- Added download percentage bar.  Displays filename and a bar indicating
  visual completeness of download and a percentage.  Overwrites
  any text at the bottom.
- Added auto-tracking camera for spectator mode.  It's mostly a novelty, but
  its fun.
- Added +showteamscores.  In team games, the intermission displays team
  totals, unless you hit TAB to display frag scores
  bind a key to +showteamscores will give you the team score display.
- Added client side DEMO support and playback
  usage:  record <file> <server>
  Autodownload is disabled when recording.
  playback: playdemo <file>
  File uses the .qwd extension and is incompatible with regular Quake and its
  demos.
- Adjust console input a bit to allow room for download percent bar (moved up
  six pixels).
- Add cl_hightrack cvar for spectator mode, causes it to always
  select camera view on player with the highest frags.  cl_hightrack 1 turns
  it on, cl_hightrack 0 turns it off (default)
- Added text to the "Single player" and "Multiplayer" menu options.
- Allowed Ctrl-V (paste) at console.
- Added GL support.
- Added FOV setting in GL version.

Fixed/Changed:
- If a model file isn't found (couldn't be download) a msg is displayed
  telling the user they may need to download or purchase an addon pak.
- Made all skin downloads go into QW directory.
- Fixed water jump bug where you hop immediately back out in narrow entrances.
- Added copyright dialog on exit (press y to quit) with credits and version
  number.
- New cvar, cl_warncmd, defaults to zero and disables the 'unknown command'
  msg.  qwcl stuffs 'cl_warncmd 1' to itself after quake.rc loads. This gets
  rid of unknown command messages (like unknown command 'startdemos') from
  the default exec files, as well as hiding "execing" messages.
- New command, windows, which will pop a user in fullscreen mode back to
  Windows (not GL or Linux versions).
- Turned off bobbing in spectator mode.
- Now execs the config.cfg in a gamedir upon receiving a new gamedir from
  the server (saves the current config into the current gamedir before
  switching to the new one).
- Reconnect command will now reconnect to the server it is currently
  connected to, or last one it was connected to.
- Fixed it so entering 'record <file> <server>' while connected disconnects
  before starting recording.
- Fixed scoreboard while dead in GL version.
- Made it so players are never completely black in the GL version.
- Changed some console load up msgs in GL.
- Fixed it so exec files without a trailing new line still work.
- changed effects in gl to not be as striking (hard to see).
- Fixed it so a 'glquake' directory is created in other gamedirs for model
  meshes in GL version.
- Fixed tolerance on corrupt skin files.

1.64 Changes to QuakeWorld Server
---------------------------------
New:
- Added new allow_download vars:
    allow_download_skins, allow_download_models,
    allow_download_sounds, allow_download_maps
- Added a few client to server commands for auto-camera support.
- Adding new server cvar, sv_spectalk (defaults to 1, or on) that controls
  whether spectators can talk to players.  If disabled, spectators can
  only talk to each other.
- New command, sv_gamedir, which sets the visible gamedir to clients.  this
  allows servers to have a different physical game directories, handing for
  machines with multiple servers that don't support symbolic links.  for
  example:
          gamedir ctf4.1
        sv_gamedir ctf
  causes qwsv to use the physical directory of 'ctf4.1', but report the
  directory to clients (players) as 'ctf' for their files.

Fixed/Changed:
- Fixed bug in serverinfo strings (memory overwrite and length problem).
- Map files are permitted to be downloaded if they aren't in a pak file
  (unless allow_download or allow_download_maps isn't set).
- Fixed annoying NET_GetPacket: Connection Refused msgs.
- Fixed annoying water jump bug where you would immedately hop back out of
  water just after you jumped in.
- Fixed air velocity movement so that it is like regular Quake,
  players have more control over their air movement and can cut
  velocity as needed just like in Quake.  This gives more control
  to the player and rewards skill.
- Spectators no longer can send or receive say_team msgs (possible
  cheating could happen).
- Stopped reporting spectators as players when front-ends request info.
- Fixed bug that disallowed 9's in ip address for filtering.
- Spectators can now send say_team msgs, but only to other spectators.
- No duplicate names allowed now (will rename people who do it).
- A client can not name themselves 'console'.


WorkArounds:
------------

-If you get the message 'GLIDE.DLL not found' OR QSpy reports error 1157,
you need to get and install the latest Glide drivers from
http://www.3dfx.com (currently v2.31).

------------------------------
2.00 Release Notes written by:
------------------------------
Dave 'Zoid' Kirsch - zoid@idsoftware.com

------------------------------
1.64 Release Notes written by:
------------------------------
Sean 'Redwood' Martin
Redwood's Quake Page - http://redwood.stomped.com

Special Thanks: All of the beta testers.