SH1106 OLED MakeCode Package

This is a quick and dirty MakeCode Package for SH1106 OLED controller, based on the Adafruit Arduino library available here.

It works with 128x64 displays based on the SH1106 controller. It was ported quickly, just to get something working. It is not necessarily pretty.

Hardware Setup

1. Insert the OLED display into the I2C ports on the break out board.

Blocks

Initialize OLED Display

Initializes the OLED display.

Sets up the OLED display and prepares it for use by the micro:bit.

OLED.init(64, 128);

This block must be placed before any of the show blocks.

Show String

Displays a string on the OLED module.

OLED.showString("hello, micro:bit!")

The init block must be placed before this.

Show Number

Displays a number on the OLED module.

OLED.showNumber(123)

The init block must be placed before this.

Clear Display

Clears the display.

OLED.clear()

The init block must be placed before this.

Supported targets

• for PXT/microbit

License

MIT