M5OSC

Sending sensor data from an M5 Stick C using Open Sound Control

Be sure to set your WiFi SSID, network password, IP Address, and port number in the arduino file!

The M5 Stick C has three different buttons built-in. This project detects short (< 0.5 seconds) and long (>= 0.5 seconds) presses of each button, and offers the following features:

• Center button:
  • Short: Cycle screen brightness (off, low, high)
  • Long: No function
• Left PWR button:
  • Short: No function
  • Long: No function

  • 5s: Toggle power

• Right secondary button:
  • Short: Toggle Turbo mode
  • Long: Reset the IMU

Installation

• OSC by Adrian Freed, Yotam Mann
  • Available in the Arduino Library Manager
• ESP32 Board Libraries
  • Requires adding a URL to the Arduino Board Manager
  • Follow the above referenced installation guide for the ESP32-based M5 Stick C
• M5StickC Libraries
  • Adds support for features built into the M5StickC that are not standard to the ESP32
  • Install by cloning the M5StickC repository to your Arduino libraries folder