Added 3D models of audiojacks

[Misca1234]

Added a number of 3D models fo the audio jacks

3D model push
#495

3D model script push
easyw/kicad-3d-models-in-freecad#254

---

Thanks for creating a pull request to contribute to the KiCad libraries! To speed up integration of your PR, please check the following items as you complete them:

• A screenshot of the model(s) aligned with KiCad footprints is very useful
• Was the 3D model(s) created in a mechanical modelling program?
• Source files (or scripts) have been contributed
• Step model submitted in 1:1 scale
• WRL model submitted in 1:2.54 scale
• 3D model alignment checked against KiCad footprint
• WRL model uses correct material properties
• Geometry check performed against mechanical models

[diegoherranz]

Thanks for sending these.

The NMJ6HCD2 is a 6.35mm jack and not 3.5mm. It is wrong in the footprints library currently. See KiCad/kicad-footprints#1145 which tries to submit many Neutrik connectors.
We need to make sure that the 3D models match the name of the footprints on that PR which will eventually make it into the repo.

The aperture for the plug looks a bit too small in your NMJ6HCD2 model?

Thanks again!

[Misca1234]

Neautrik changed to 6.35 hole, including the filename

[chmorgan]

Hi @Misca1234 I see the rename of the Jack_3.5mm_Neutrik_NMJ6HCD2_Horizontal to 6.35mm but there isn't a footprint for 6.35mm in the footprint library.

[chmorgan]

Connector_Audio.3dshapes/Jack_3.5mm_CUI_SJ1-3533NG_Horizontal.step | Bin 0 -> 71185 bytes
Connector_Audio.3dshapes/Jack_3.5mm_CUI_SJ1-3533NG_Horizontal.wrl | Bin 0 -> 42552 bytes
Looks good

Connector_Audio.3dshapes/Jack_3.5mm_Ledino_KB3SPRS_Horizontal.step | Bin 0 -> 92722 bytes
Connector_Audio.3dshapes/Jack_3.5mm_Ledino_KB3SPRS_Horizontal.wrl | Bin 0 -> 71264 bytes
Looks good

Connector_Audio.3dshapes/Jack_3.5mm_Neutrik_NMJ6HCD2_Horizontal.step | Bin 0 -> 394354 bytes
Connector_Audio.3dshapes/Jack_3.5mm_Neutrik_NMJ6HCD2_Horizontal.wrl | Bin 0 -> 170099 bytes
Deleted when converted to 6.35mm but there doesn't appear to be a 6.35mm footprint.

Connector_Audio.3dshapes/Jack_3.5mm_PJ31060-I_Horizontal.step | Bin 0 -> 174804 bytes
Connector_Audio.3dshapes/Jack_3.5mm_PJ31060-I_Horizontal.wrl | Bin 0 -> 97400 bytes
Looks good

Connector_Audio.3dshapes/Jack_3.5mm_PJ320D_Horizontal.step | Bin 0 -> 100081 bytes
Connector_Audio.3dshapes/Jack_3.5mm_PJ320D_Horizontal.wrl | Bin 0 -> 74816 bytes
The pads here don’t align with the footprint.

Connector_Audio.3dshapes/Jack_3.5mm_PJ320E_Horizontal.step | Bin 0 -> 92752 bytes
Connector_Audio.3dshapes/Jack_3.5mm_PJ320E_Horizontal.wrl | Bin 0 -> 64933 bytes
Looks good.

Connector_Audio.3dshapes/Jack_3.5mm_QingPu_WQP-PJ398SM_Vertical.step | Bin 0 -> 250661 bytes
Connector_Audio.3dshapes/Jack_3.5mm_QingPu_WQP-PJ398SM_Vertical.wrl | Bin 0 -> 281091 bytes
Looks good.

[evanshultz]

There was an issue with that Neutrik jack's description and maybe name. I can't quite recall. But it will be fixed once KiCad/kicad-footprints#1145 is merged. So you could optionally align any naming with that PR now since the existing footprint has known issues.

[Franck78]

It is merged.
KiCad/kicad-footprints#1145

This PR can evolve no ?

[Franck78]

Sent fix for the script generating the bad 320D jack

The obvious error easily fixed

6.5mm_Neutrik_NMJ6HCD2 do have a foot print available

Here are the WRML&STEP from the script
Jack_3.5mm_PJ320D_Horizontal.zip

Total 7 3dmodels ready to go.