-
Notifications
You must be signed in to change notification settings - Fork 279
New issue
Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.
By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.
Already on GitHub? Sign in to your account
zigbee2mqtt<->EZSP incompatible with latest Gecko SDK v4.4.0.0 (EmberZNet 7.4.0.0) firmware build #854
Comments
@kirovilya I don't have a dev environment setup to check into this too much. I am unsure how to run test changes locally/easily I wanted to add some logging to see exactly which config failed to set to confirm |
where can I get ncp firmware 7.4.0.0? |
I have a skyconnect so got it here: https://github.com/NabuCasa/silabs-firmware I am unsure if you have an adapter with a different pin out or is incompatible with these builds unfortunately |
Or here for other adapters (it's a fork of the silabs source) |
This is actually pretty urgent, this issue broke a lot of Zigbee2MQTT installations today, and will break more the next time "Silicon Labs Multiprotocol" is updated for HA users. More info here: |
I am surprised the addon pushed a FW update so quickly, I thought I was on the cutting edge here (and I still kind of think I am) and was reporting/looking into it a bit just to be polite/allow developers to get ahead of it (Especially since a lot historically falls onto @kirovilya at least in this project (much appreciated by the way!)) |
See #854, should be fixed in the dev branch. Changes will be available in the dev branch in a few hours from now. |
@kirovilya fixed it in #858 |
I haven't seen the updated release in the dev branch yet, just the commits and testing activity. |
Have seen the Update is available in z2m edge. |
Working here. |
I just had a try on the new SDK 4.4.0 and the dev branch of z2m and I had those warnings: 01/10/2024 04:17:14 PM Using '/app/data' as data directory Z2m is working. I revert to SDK 4.3.0 (firmware 7.3.0.0, SONOFF DONGLE-E) on which I have no warnings. SDK 4.3.1 and higher provide me this warning only: Assertion failed: Command (setConfigurationValue) returned unexpected state: [object Object] Zigbee herdmann below for some debugging if it may help (SDK 4.4.0, firmware 7.4.0.0) |
@chris-1243 thanks for checking. yes, there are some warnings, but they not critical... I’ll continue to improve it as soon as I have free time |
Great news. I am going to re-flash my coordinator with the latest SDK and see how it will perform |
Just swapped to the Edge Z2M addon on HASS, updated the Silabs Multipan add to latest (with the new Gecko SDK) and also flashed the Sonoff Dongle E to 4.4.0.... all working so far! |
I can echo what Chris was experiencing regarding the warnings, as seen below in the startup log (probably redacted more than I needed, oh well):
However, (and I'm seeing this with stable as well when I downgrade the SiLabs FW back to 2.3.2, so maybe it's a my network issue), when I attempt to communicate with any devices, I get timeout errors.
So, unsure if this is a FW issue or a me issue, especially after hearing reports that the latest dev is in fact working for other people, figured I'd drop this here just in case. Sorry for cluttering this topic if this is a my network issue! |
Anyone in here that has tested EDGE for a decent length of time, could you drop a line here, so we know what errors some people might still be seeing (or if it works great 😄)? Thanks. |
Issue is fixed now that 1.35.2 is released. I am on 7.4.0.0 and will stick it out to see if anything arises, thanks @Nerivec and @kirovilya |
Is 7.4.0.0 working for you? Thinking of upgrading from 7.3.2.0 :) |
7.4.0.0 is working on version 1.35.2 or higher. Just be carefull. RCP firmware based on SDK 4.4.0 (multi-protocol with silabs addon) is problematic and has been downgraded to SDK 4.3.1. NCP firmware 7.4.0.0 (Zigbee only) does not seem to be affected by any issues and is working fine. Have a look to this link |
Thanks! I only use zigbee for now and run the NCP firmware so guess I could upgrade. But think I will wait a while... Latest is not always greatest... :) |
Just tested 1.35.3 with a Sonoff ZBDongle-E running NCP 7.4.0.0. It died within 30 minutes with the following error: |
Updated to the latest silabs firmware (yes I know this is beta but figured I would at least track it here....)
Startup fails:
rolling back to 7.3.2.0 runs great
The text was updated successfully, but these errors were encountered: