-
-
Notifications
You must be signed in to change notification settings - Fork 1.6k
New issue
Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.
By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.
Already on GitHub? Sign in to your account
TuYa TS0012_switch_module turns on both loads when only one switch is pressed #14541
Comments
Same problem with _TZ3000_odzoiovu 3 Gang I got that model: _TZ3000_bvrlqyj7 and it works fine (old paired) _TZ3000_odzoiovu is been paired today. I´m using the same z2m, just with a conbee2 |
I have the same problem Tuya TS0012, 1.28.1 |
So mine is been fix in the update from 1.28.0 to .1. As said before, I got other switches that was working as normal, and this one was a new addition.... |
@mikelpsv can you provide a screenshot of the z2m frontend -> device -> about page |
|
Same problem with same device _TZ3000_jl7qyupf. Upgrade z2m to 1.28.1 not fixed problem. |
@mikelpsv for the @ZholobovSS same for your device. |
edit: |
TS0012_switch_module in this z2m 1.28.4-1 version |
@slzzuk fixed! Changes will be available in the dev branch in a few hours from now. (https://www.zigbee2mqtt.io/advanced/more/switch-to-dev-branch.html) |
What happened?
TuYa TS0012_switch_module 2 gang switch module - (without neutral)
When I click on one of the two switches on the dashboard (State Left or State Right) that refer to that switch, both loads turn on, not just one. Similarly, then clicking on one of the switches turns off both loads at the same time.
What did you expect to happen?
Each of the switches (Left or Right) will only control its own load.
How to reproduce it (minimal and precise)
No response
Zigbee2MQTT version
1.28.0 commit: 03ba647
Adapter firmware version
20220219
Adapter
CC2652P2 Based Zigbee to PoE Coordinator 2022
Debug log
log.txt
The text was updated successfully, but these errors were encountered: