Koheron v2017.2

arch/arm/configs/xilinx_zynq_defconfig

@@ -113,6 +113,7 @@ CONFIG_XILINX_PS_EMAC=y
 CONFIG_MDIO_BITBANG=y
 CONFIG_MARVELL_PHY=y
 CONFIG_REALTEK_PHY=y
+CONFIG_LANTIQ_PHY=y
 CONFIG_VITESSE_PHY=y
 CONFIG_INPUT_SPARSEKMAP=y
 CONFIG_INPUT_EVDEV=y
@@ -244,3 +245,89 @@ CONFIG_RCU_CPU_STALL_TIMEOUT=60
 CONFIG_FONTS=y
 CONFIG_FONT_8x8=y
 CONFIG_FONT_8x16=y
+CONFIG_WIRELESS=y
+CONFIG_CFG80211=y
+CONFIG_MAC80211=y
+CONFIG_RTLWIFI=y
+CONFIG_RTL8192CU=y
+CONFIG_RT2X00=y
+CONFIG_RT2800USB=y
+CONFIG_RT2800USB_RT3573=y
+CONFIG_RT2800USB_RT53XX=y
+CONFIG_RT2800USB_RT55XX=y
+CONFIG_RT2800USB_UNKNOWN=y
+CONFIG_NETFILTER=y
+CONFIG_NETFILTER_ADVANCED=y
+CONFIG_NF_CONNTRACK=y
+CONFIG_NF_CONNTRACK_PROCFS=y
+CONFIG_NF_NAT=y
+CONFIG_NF_NAT_NEEDED=y
+CONFIG_NETFILTER_XTABLES=y
+CONFIG_NETFILTER_XT_NAT=y
+CONFIG_NETFILTER_XT_MATCH_CONNTRACK=y
+CONFIG_NETFILTER_XT_MATCH_STATE=y
+CONFIG_NF_DEFRAG_IPV4=y
+CONFIG_NF_CONNTRACK_IPV4=y
+CONFIG_NF_CONNTRACK_PROC_COMPAT=y
+CONFIG_NF_NAT_IPV4=y
+CONFIG_NF_NAT_MASQUERADE_IPV4=y
+CONFIG_IP_NF_IPTABLES=y
+CONFIG_IP_NF_FILTER=y
+CONFIG_IP_NF_NAT=y
+CONFIG_IP_NF_TARGET_MASQUERADE=y
+CONFIG_IP_NF_MANGLE=y
+CONFIG_INPUT_TOUCHSCREEN=y
+CONFIG_OF_TOUCHSCREEN=y
+CONFIG_TOUCHSCREEN_USB_COMPOSITE=y
+CONFIG_TOUCHSCREEN_USB_EGALAX=y
+CONFIG_TOUCHSCREEN_USB_PANJIT=y
+CONFIG_TOUCHSCREEN_USB_3M=y
+CONFIG_TOUCHSCREEN_USB_ITM=y
+CONFIG_TOUCHSCREEN_USB_ETURBO=y
+CONFIG_TOUCHSCREEN_USB_GUNZE=y
+CONFIG_TOUCHSCREEN_USB_DMC_TSC10=y
+CONFIG_TOUCHSCREEN_USB_IRTOUCH=y
+CONFIG_TOUCHSCREEN_USB_IDEALTEK=y
+CONFIG_TOUCHSCREEN_USB_GENERAL_TOUCH=y
+CONFIG_TOUCHSCREEN_USB_GOTOP=y
+CONFIG_TOUCHSCREEN_USB_JASTEC=y
+CONFIG_TOUCHSCREEN_USB_ELO=y
+CONFIG_TOUCHSCREEN_USB_E2I=y
+CONFIG_TOUCHSCREEN_USB_ZYTRONIC=y
+CONFIG_TOUCHSCREEN_USB_ETT_TC45USB=y
+CONFIG_TOUCHSCREEN_USB_NEXIO=y
+CONFIG_TOUCHSCREEN_USB_EASYTOUCH=y
+CONFIG_FB_SYS_FOPS=y
+CONFIG_FB_DEFERRED_IO=y
+CONFIG_FB_MODE_HELPERS=y
+CONFIG_FB_UDL=y
+CONFIG_FUSE_FS=y
+CONFIG_SPI_SPIDEV=y
+CONFIG_XILINX_PS_EMAC_HWTSTAMP=y
+CONFIG_SND_USB_AUDIO=y
+CONFIG_AUTOFS4_FS=y
+CONFIG_NAMESPACES=y
+CONFIG_UTS_NS=y
+CONFIG_IPC_NS=y
+CONFIG_PID_NS=y
+CONFIG_NET_NS=y
+CONFIG_USB_ACM=y
+CONFIG_IPV6=y
+CONFIG_DEVPTS_MULTIPLE_INSTANCES=y
+CONFIG_CGROUP_CPUACCT=y
+CONFIG_CGROUP_DEVICE=y
+CONFIG_CGROUP_FREEZER=y
+CONFIG_CGROUP_SCHED=y
+CONFIG_CPUSETS=y
+CONFIG_MEMCG=y
+CONFIG_MACVLAN=y
+CONFIG_VETH=y
+CONFIG_BRIDGE=y
+CONFIG_BRIDGE_NETFILTER=y
+CONFIG_NETFILTER_XT_MATCH_ADDRTYPE=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_OVERLAY_FS=y
+CONFIG_EXT4_FS_POSIX_ACL=y
+CONFIG_EXT4_FS_SECURITY=y
+CONFIG_KEYS=y
+CONFIG_XILINX_DEVCFG=y

drivers/misc/eeprom/at24.c

@@ -619,6 +619,9 @@ static int at24_probe(struct i2c_client *client, const struct i2c_device_id *id)
 		 * is recommended anyhow.
 		 */
 		chip.page_size = 1;
+                if(!strncmp(id->name,"24c64",5)){
+			chip.page_size = 32;
+		}
 
 		/* update chipdata if OF is present */
 		at24_get_ofdata(client, &chip);

drivers/net/phy/Kconfig

@@ -226,6 +226,11 @@ config DP83867_PHY
 	---help---
 	  Currently supports the DP83867 PHY.
 
+config LANTIQ_PHY
+	tristate "Driver for Lantiq PHYs"
+	---help---
+	  Supports the 11G and 22E PHYs.
+
 config FIXED_PHY
 	tristate "MDIO Bus/PHY emulation with fixed speed/link PHYs"
 	depends on PHYLIB

drivers/net/phy/Makefile

@@ -41,6 +41,7 @@ obj-$(CONFIG_INTEL_XWAY_PHY)	+= intel-xway.o
 obj-$(CONFIG_LSI_ET1011C_PHY)	+= et1011c.o
 obj-$(CONFIG_LXT_PHY)		+= lxt.o
 obj-$(CONFIG_MARVELL_PHY)	+= marvell.o
+obj-$(CONFIG_LANTIQ_PHY)	+= lantiq.o
 obj-$(CONFIG_MICREL_KS8995MA)	+= spi_ks8995.o
 obj-$(CONFIG_MICREL_PHY)	+= micrel.o
 obj-$(CONFIG_MICROCHIP_PHY)	+= microchip.o