Screen blinking #31

HateGitHub · 2018-01-27T21:13:08Z

It starting after install and its blinking in all modes.

HateGitHub · 2018-01-28T09:53:45Z

So its blinking only in 1080p. 800x600 works. But i cant get to config.txt by mount -o remount,rw /flash

This resolves a crash if loaded under qemu + haxm under windows. See https://www.spinics.net/lists/kernel/msg2689835.html for details. Here is a boot log (the log is from chromeos-4.4, but Tao Wu says that the same log is also seen with vanilla v4.4.110-rc1). [ 0.712750] Freeing unused kernel memory: 552K [ 0.721821] init: Corrupted page table at address 57b029b332e0 [ 0.722761] PGD 80000000bb238067 PUD bc36a067 PMD bc369067 PTE 45d2067 [ 0.722761] Bad pagetable: 000b [#1] PREEMPT SMP [ 0.722761] Modules linked in: [ 0.722761] CPU: 1 PID: 1 Comm: init Not tainted 4.4.96 #31 [ 0.722761] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.7.5.1-0-g8936dbb-20141113_115728-nilsson.home.kraxel.org 04/01/2014 [ 0.722761] task: ffff8800bc290000 ti: ffff8800bc28c000 task.ti: ffff8800bc28c000 [ 0.722761] RIP: 0010:[<ffffffff83f4129e>] [<ffffffff83f4129e>] __clear_user+0x42/0x67 [ 0.722761] RSP: 0000:ffff8800bc28fcf8 EFLAGS: 00010202 [ 0.722761] RAX: 0000000000000000 RBX: 00000000000001a4 RCX: 00000000000001a4 [ 0.722761] RDX: 0000000000000000 RSI: 0000000000000008 RDI: 000057b029b332e0 [ 0.722761] RBP: ffff8800bc28fd08 R08: ffff8800bc290000 R09: ffff8800bb2f4000 [ 0.722761] R10: ffff8800bc290000 R11: ffff8800bb2f4000 R12: 000057b029b332e0 [ 0.722761] R13: 0000000000000000 R14: 000057b029b33340 R15: ffff8800bb1e2a00 [ 0.722761] FS: 0000000000000000(0000) GS:ffff8800bfb00000(0000) knlGS:0000000000000000 [ 0.722761] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b [ 0.722761] CR2: 000057b029b332e0 CR3: 00000000bb2f8000 CR4: 00000000000006e0 [ 0.722761] Stack: [ 0.722761] 000057b029b332e0 ffff8800bb95fa80 ffff8800bc28fd18 ffffffff83f4120c [ 0.722761] ffff8800bc28fe18 ffffffff83e9e7a1 ffff8800bc28fd68 0000000000000000 [ 0.722761] ffff8800bc290000 ffff8800bc290000 ffff8800bc290000 ffff8800bc290000 [ 0.722761] Call Trace: [ 0.722761] [<ffffffff83f4120c>] clear_user+0x2e/0x30 [ 0.722761] [<ffffffff83e9e7a1>] load_elf_binary+0xa7f/0x18f7 [ 0.722761] [<ffffffff83de2088>] search_binary_handler+0x86/0x19c [ 0.722761] [<ffffffff83de389e>] do_execveat_common.isra.26+0x909/0xf98 [ 0.722761] [<ffffffff844febe0>] ? rest_init+0x87/0x87 [ 0.722761] [<ffffffff83de40be>] do_execve+0x23/0x25 [ 0.722761] [<ffffffff83c002e3>] run_init_process+0x2b/0x2d [ 0.722761] [<ffffffff844fec4d>] kernel_init+0x6d/0xda [ 0.722761] [<ffffffff84505b2f>] ret_from_fork+0x3f/0x70 [ 0.722761] [<ffffffff844febe0>] ? rest_init+0x87/0x87 [ 0.722761] Code: 86 84 be 12 00 00 00 e8 87 0d e8 ff 66 66 90 48 89 d8 48 c1 eb 03 4c 89 e7 83 e0 07 48 89 d9 be 08 00 00 00 31 d2 48 85 c9 74 0a <48> 89 17 48 01 f7 ff c9 75 f6 48 89 c1 85 c9 74 09 88 17 48 ff [ 0.722761] RIP [<ffffffff83f4129e>] __clear_user+0x42/0x67 [ 0.722761] RSP <ffff8800bc28fcf8> [ 0.722761] ---[ end trace def703879b4ff090 ]--- [ 0.722761] BUG: sleeping function called from invalid context at /mnt/host/source/src/third_party/kernel/v4.4/kernel/locking/rwsem.c:21 [ 0.722761] in_atomic(): 0, irqs_disabled(): 1, pid: 1, name: init [ 0.722761] CPU: 1 PID: 1 Comm: init Tainted: G D 4.4.96 #31 [ 0.722761] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.7.5.1-0-g8936dbb-20141113_115728-nilsson.home.kraxel.org 04/01/2014 [ 0.722761] 0000000000000086 dcb5d76098c89836 ffff8800bc28fa30 ffffffff83f34004 [ 0.722761] ffffffff84839dc2 0000000000000015 ffff8800bc28fa40 ffffffff83d57dc9 [ 0.722761] ffff8800bc28fa68 ffffffff83d57e6a ffffffff84a53640 0000000000000000 [ 0.722761] Call Trace: [ 0.722761] [<ffffffff83f34004>] dump_stack+0x4d/0x63 [ 0.722761] [<ffffffff83d57dc9>] ___might_sleep+0x13a/0x13c [ 0.722761] [<ffffffff83d57e6a>] __might_sleep+0x9f/0xa6 [ 0.722761] [<ffffffff84502788>] down_read+0x20/0x31 [ 0.722761] [<ffffffff83cc5d9b>] __blocking_notifier_call_chain+0x35/0x63 [ 0.722761] [<ffffffff83cc5ddd>] blocking_notifier_call_chain+0x14/0x16 [ 0.800374] usb 1-1: new full-speed USB device number 2 using uhci_hcd [ 0.722761] [<ffffffff83cefe97>] profile_task_exit+0x1a/0x1c [ 0.802309] [<ffffffff83cac84e>] do_exit+0x39/0xe7f [ 0.802309] [<ffffffff83ce5938>] ? vprintk_default+0x1d/0x1f [ 0.802309] [<ffffffff83d7bb95>] ? printk+0x57/0x73 [ 0.802309] [<ffffffff83c46e25>] oops_end+0x80/0x85 [ 0.802309] [<ffffffff83c7b747>] pgtable_bad+0x8a/0x95 [ 0.802309] [<ffffffff83ca7f4a>] __do_page_fault+0x8c/0x352 [ 0.802309] [<ffffffff83eefba5>] ? file_has_perm+0xc4/0xe5 [ 0.802309] [<ffffffff83ca821c>] do_page_fault+0xc/0xe [ 0.802309] [<ffffffff84507682>] page_fault+0x22/0x30 [ 0.802309] [<ffffffff83f4129e>] ? __clear_user+0x42/0x67 [ 0.802309] [<ffffffff83f4127f>] ? __clear_user+0x23/0x67 [ 0.802309] [<ffffffff83f4120c>] clear_user+0x2e/0x30 [ 0.802309] [<ffffffff83e9e7a1>] load_elf_binary+0xa7f/0x18f7 [ 0.802309] [<ffffffff83de2088>] search_binary_handler+0x86/0x19c [ 0.802309] [<ffffffff83de389e>] do_execveat_common.isra.26+0x909/0xf98 [ 0.802309] [<ffffffff844febe0>] ? rest_init+0x87/0x87 [ 0.802309] [<ffffffff83de40be>] do_execve+0x23/0x25 [ 0.802309] [<ffffffff83c002e3>] run_init_process+0x2b/0x2d [ 0.802309] [<ffffffff844fec4d>] kernel_init+0x6d/0xda [ 0.802309] [<ffffffff84505b2f>] ret_from_fork+0x3f/0x70 [ 0.802309] [<ffffffff844febe0>] ? rest_init+0x87/0x87 [ 0.830559] Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000009 [ 0.830559] [ 0.831305] Kernel Offset: 0x2c00000 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffffbfffffff) [ 0.831305] ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000009 The crash part of this problem may be solved with the following patch (thanks to Hugh for the hint). There is still another problem, though - with this patch applied, the qemu session aborts with "VCPU Shutdown request", whatever that means. Cc: lepton <ytht.net@gmail.com> Signed-off-by: Guenter Roeck <groeck@chromium.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Increase kasan instrumented kernel stack size from 32k to 64k. Other architectures seems to get away with just doubling kernel stack size under kasan, but on s390 this appears to be not enough due to bigger frame size. The particular pain point is kasan inlined checks (CONFIG_KASAN_INLINE vs CONFIG_KASAN_OUTLINE). With inlined checks one particular case hitting stack overflow is fs sync on xfs filesystem: #0 [9a0681e8] 704 bytes check_usage at 34b1fc #1 [9a0684a8] 432 bytes check_usage at 34c710 #2 [9a068658] 1048 bytes validate_chain at 35044a #3 [9a068a70] 312 bytes __lock_acquire at 3559fe #4 [9a068ba8] 440 bytes lock_acquire at 3576ee #5 [9a068d60] 104 bytes _raw_spin_lock at 21b44e0 #6 [9a068dc8] 1992 bytes enqueue_entity at 2dbf72 #7 [9a069590] 1496 bytes enqueue_task_fair at 2df5f0 #8 [9a069b68] 64 bytes ttwu_do_activate at 28f438 #9 [9a069ba8] 552 bytes try_to_wake_up at 298c4c #10 [9a069dd0] 168 bytes wake_up_worker at 23f97c #11 [9a069e78] 200 bytes insert_work at 23fc2e #12 [9a069f40] 648 bytes __queue_work at 2487c0 #13 [9a06a1c8] 200 bytes __queue_delayed_work at 24db28 #14 [9a06a290] 248 bytes mod_delayed_work_on at 24de84 #15 [9a06a388] 24 bytes kblockd_mod_delayed_work_on at 153e2a0 #16 [9a06a3a0] 288 bytes __blk_mq_delay_run_hw_queue at 158168c #17 [9a06a4c0] 192 bytes blk_mq_run_hw_queue at 1581a3c #18 [9a06a580] 184 bytes blk_mq_sched_insert_requests at 15a2192 #19 [9a06a638] 1024 bytes blk_mq_flush_plug_list at 1590f3a #20 [9a06aa38] 704 bytes blk_flush_plug_list at 1555028 #21 [9a06acf8] 320 bytes schedule at 219e476 #22 [9a06ae38] 760 bytes schedule_timeout at 21b0aac #23 [9a06b130] 408 bytes wait_for_common at 21a1706 #24 [9a06b2c8] 360 bytes xfs_buf_iowait at fa1540 #25 [9a06b430] 256 bytes __xfs_buf_submit at fadae6 #26 [9a06b530] 264 bytes xfs_buf_read_map at fae3f6 #27 [9a06b638] 656 bytes xfs_trans_read_buf_map at 10ac9a8 #28 [9a06b8c8] 304 bytes xfs_btree_kill_root at e72426 #29 [9a06b9f8] 288 bytes xfs_btree_lookup_get_block at e7bc5e #30 [9a06bb18] 624 bytes xfs_btree_lookup at e7e1a6 #31 [9a06bd88] 2664 bytes xfs_alloc_ag_vextent_near at dfa070 #32 [9a06c7f0] 144 bytes xfs_alloc_ag_vextent at dff3ca #33 [9a06c880] 1128 bytes xfs_alloc_vextent at e05fce #34 [9a06cce8] 584 bytes xfs_bmap_btalloc at e58342 #35 [9a06cf30] 1336 bytes xfs_bmapi_write at e618de #36 [9a06d468] 776 bytes xfs_iomap_write_allocate at ff678e #37 [9a06d770] 720 bytes xfs_map_blocks at f82af8 rockchip-linux#38 [9a06da40] 928 bytes xfs_writepage_map at f83cd6 rockchip-linux#39 [9a06dde0] 320 bytes xfs_do_writepage at f85872 rockchip-linux#40 [9a06df20] 1320 bytes write_cache_pages at 73dfe8 rockchip-linux#41 [9a06e448] 208 bytes xfs_vm_writepages at f7f892 rockchip-linux#42 [9a06e518] 88 bytes do_writepages at 73fe6a rockchip-linux#43 [9a06e570] 872 bytes __writeback_single_inode at a20cb6 rockchip-linux#44 [9a06e8d8] 664 bytes writeback_sb_inodes at a23be2 rockchip-linux#45 [9a06eb70] 296 bytes __writeback_inodes_wb at a242e0 rockchip-linux#46 [9a06ec98] 928 bytes wb_writeback at a2500e rockchip-linux#47 [9a06f038] 848 bytes wb_do_writeback at a260ae rockchip-linux#48 [9a06f388] 536 bytes wb_workfn at a28228 rockchip-linux#49 [9a06f5a0] 1088 bytes process_one_work at 24a234 rockchip-linux#50 [9a06f9e0] 1120 bytes worker_thread at 24ba26 rockchip-linux#51 [9a06fe40] 104 bytes kthread at 26545a rockchip-linux#52 [9a06fea8] kernel_thread_starter at 21b6b62 To be able to increase the stack size to 64k reuse LLILL instruction in __switch_to function to load 64k - STACK_FRAME_OVERHEAD - __PT_SIZE (65192) value as unsigned. Reported-by: Benjamin Block <bblock@linux.ibm.com> Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

When using direct commands (DCMDs) on an RK3399, we get spurious CQE completion interrupts for the DCMD transaction slot (#31): [ 931.196520] ------------[ cut here ]------------ [ 931.201702] mmc1: cqhci: spurious TCN for tag 31 [ 931.206906] WARNING: CPU: 0 PID: 1433 at /usr/src/kernel/drivers/mmc/host/cqhci.c:725 cqhci_irq+0x2e4/0x490 [ 931.206909] Modules linked in: [ 931.206918] CPU: 0 PID: 1433 Comm: irq/29-mmc1 Not tainted 4.19.8-rt6-funkadelic #1 [ 931.206920] Hardware name: Theobroma Systems RK3399-Q7 SoM (DT) [ 931.206924] pstate: 40000005 (nZcv daif -PAN -UAO) [ 931.206927] pc : cqhci_irq+0x2e4/0x490 [ 931.206931] lr : cqhci_irq+0x2e4/0x490 [ 931.206933] sp : ffff00000e54bc80 [ 931.206934] x29: ffff00000e54bc80 x28: 0000000000000000 [ 931.206939] x27: 0000000000000001 x26: ffff000008f217e8 [ 931.206944] x25: ffff8000f02ef030 x24: ffff0000091417b0 [ 931.206948] x23: ffff0000090aa000 x22: ffff8000f008b000 [ 931.206953] x21: 0000000000000002 x20: 000000000000001f [ 931.206957] x19: ffff8000f02ef018 x18: ffffffffffffffff [ 931.206961] x17: 0000000000000000 x16: 0000000000000000 [ 931.206966] x15: ffff0000090aa6c8 x14: 0720072007200720 [ 931.206970] x13: 0720072007200720 x12: 0720072007200720 [ 931.206975] x11: 0720072007200720 x10: 0720072007200720 [ 931.206980] x9 : 0720072007200720 x8 : 0720072007200720 [ 931.206984] x7 : 0720073107330720 x6 : 00000000000005a0 [ 931.206988] x5 : ffff00000860d4b0 x4 : 0000000000000000 [ 931.206993] x3 : 0000000000000001 x2 : 0000000000000001 [ 931.206997] x1 : 1bde3a91b0d4d900 x0 : 0000000000000000 [ 931.207001] Call trace: [ 931.207005] cqhci_irq+0x2e4/0x490 [ 931.207009] sdhci_arasan_cqhci_irq+0x5c/0x90 [ 931.207013] sdhci_irq+0x98/0x930 [ 931.207019] irq_forced_thread_fn+0x2c/0xa0 [ 931.207023] irq_thread+0x114/0x1c0 [ 931.207027] kthread+0x128/0x130 [ 931.207032] ret_from_fork+0x10/0x20 [ 931.207035] ---[ end trace 0000000000000002 ]--- The driver shows this message only for the first spurious interrupt by using WARN_ONCE(). Changing this to WARN() shows, that this is happening quite frequently (up to once a second). Since the eMMC 5.1 specification, where CQE and CQHCI are specified, does not mention that spurious TCN interrupts for DCMDs can be simply ignored, we must assume that using this feature is not working reliably. The current implementation uses DCMD for REQ_OP_FLUSH only, and I could not see any performance/power impact when disabling this optional feature for RK3399. Therefore this patch disables DCMDs for RK3399. Signed-off-by: Christoph Muellner <christoph.muellner@theobroma-systems.com> Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Fixes: 84362d7 ("mmc: sdhci-of-arasan: Add CQHCI support for arasan,sdhci-5.1") Cc: stable@vger.kernel.org [the corresponding code changes are queued for 5.2 so doing that as well] Signed-off-by: Heiko Stuebner <heiko@sntech.de>

The following deadlock was captured. The first process is holding 'kernfs_mutex' and hung by io. The io was staging in 'r1conf.pending_bio_list' of raid1 device, this pending bio list would be flushed by second process 'md127_raid1', but it was hung by 'kernfs_mutex'. Using sysfs_notify_dirent_safe() to replace sysfs_notify() can fix it. There were other sysfs_notify() invoked from io path, removed all of them. PID: 40430 TASK: ffff8ee9c8c65c40 CPU: 29 COMMAND: "probe_file" #0 [ffffb87c4df37260] __schedule at ffffffff9a8678ec #1 [ffffb87c4df372f8] schedule at ffffffff9a867f06 #2 [ffffb87c4df37310] io_schedule at ffffffff9a0c73e6 #3 [ffffb87c4df37328] __dta___xfs_iunpin_wait_3443 at ffffffffc03a4057 [xfs] #4 [ffffb87c4df373a0] xfs_iunpin_wait at ffffffffc03a6c79 [xfs] #5 [ffffb87c4df373b0] __dta_xfs_reclaim_inode_3357 at ffffffffc039a46c [xfs] #6 [ffffb87c4df37400] xfs_reclaim_inodes_ag at ffffffffc039a8b6 [xfs] #7 [ffffb87c4df37590] xfs_reclaim_inodes_nr at ffffffffc039bb33 [xfs] #8 [ffffb87c4df375b0] xfs_fs_free_cached_objects at ffffffffc03af0e9 [xfs] #9 [ffffb87c4df375c0] super_cache_scan at ffffffff9a287ec7 #10 [ffffb87c4df37618] shrink_slab at ffffffff9a1efd93 #11 [ffffb87c4df37700] shrink_node at ffffffff9a1f5968 #12 [ffffb87c4df37788] do_try_to_free_pages at ffffffff9a1f5ea2 #13 [ffffb87c4df377f0] try_to_free_mem_cgroup_pages at ffffffff9a1f6445 #14 [ffffb87c4df37880] try_charge at ffffffff9a26cc5f #15 [ffffb87c4df37920] memcg_kmem_charge_memcg at ffffffff9a270f6a #16 [ffffb87c4df37958] new_slab at ffffffff9a251430 #17 [ffffb87c4df379c0] ___slab_alloc at ffffffff9a251c85 #18 [ffffb87c4df37a80] __slab_alloc at ffffffff9a25635d #19 [ffffb87c4df37ac0] kmem_cache_alloc at ffffffff9a251f89 #20 [ffffb87c4df37b00] alloc_inode at ffffffff9a2a2b10 #21 [ffffb87c4df37b20] iget_locked at ffffffff9a2a4854 #22 [ffffb87c4df37b60] kernfs_get_inode at ffffffff9a311377 #23 [ffffb87c4df37b80] kernfs_iop_lookup at ffffffff9a311e2b #24 [ffffb87c4df37ba8] lookup_slow at ffffffff9a290118 #25 [ffffb87c4df37c10] walk_component at ffffffff9a291e83 #26 [ffffb87c4df37c78] path_lookupat at ffffffff9a293619 #27 [ffffb87c4df37cd8] filename_lookup at ffffffff9a2953af #28 [ffffb87c4df37de8] user_path_at_empty at ffffffff9a295566 #29 [ffffb87c4df37e10] vfs_statx at ffffffff9a289787 #30 [ffffb87c4df37e70] SYSC_newlstat at ffffffff9a289d5d #31 [ffffb87c4df37f18] sys_newlstat at ffffffff9a28a60e #32 [ffffb87c4df37f28] do_syscall_64 at ffffffff9a003949 #33 [ffffb87c4df37f50] entry_SYSCALL_64_after_hwframe at ffffffff9aa001ad RIP: 00007f617a5f2905 RSP: 00007f607334f838 RFLAGS: 00000246 RAX: ffffffffffffffda RBX: 00007f6064044b20 RCX: 00007f617a5f2905 RDX: 00007f6064044b20 RSI: 00007f6064044b20 RDI: 00007f6064005890 RBP: 00007f6064044aa0 R8: 0000000000000030 R9: 000000000000011c R10: 0000000000000013 R11: 0000000000000246 R12: 00007f606417e6d0 R13: 00007f6064044aa0 R14: 00007f6064044b10 R15: 00000000ffffffff ORIG_RAX: 0000000000000006 CS: 0033 SS: 002b PID: 927 TASK: ffff8f15ac5dbd80 CPU: 42 COMMAND: "md127_raid1" #0 [ffffb87c4df07b28] __schedule at ffffffff9a8678ec #1 [ffffb87c4df07bc0] schedule at ffffffff9a867f06 #2 [ffffb87c4df07bd8] schedule_preempt_disabled at ffffffff9a86825e #3 [ffffb87c4df07be8] __mutex_lock at ffffffff9a869bcc #4 [ffffb87c4df07ca0] __mutex_lock_slowpath at ffffffff9a86a013 #5 [ffffb87c4df07cb0] mutex_lock at ffffffff9a86a04f #6 [ffffb87c4df07cc8] kernfs_find_and_get_ns at ffffffff9a311d83 #7 [ffffb87c4df07cf0] sysfs_notify at ffffffff9a314b3a #8 [ffffb87c4df07d18] md_update_sb at ffffffff9a688696 #9 [ffffb87c4df07d98] md_update_sb at ffffffff9a6886d5 #10 [ffffb87c4df07da8] md_check_recovery at ffffffff9a68ad9c #11 [ffffb87c4df07dd0] raid1d at ffffffffc01f0375 [raid1] #12 [ffffb87c4df07ea0] md_thread at ffffffff9a680348 #13 [ffffb87c4df07f08] kthread at ffffffff9a0b8005 #14 [ffffb87c4df07f50] ret_from_fork at ffffffff9aa00344 Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com> Signed-off-by: Song Liu <songliubraving@fb.com>

…_kfree [ Upstream commit 9905f72 ] The mhu_db_channel info is allocated per channel using devm_kzalloc from mhu_db_mbox_xlate which gets called from mbox_request_channel. However we are releasing the allocated mhu_db_channel info using plain kfree from mhu_db_shutdown which is called from mbox_free_channel. This leads to random crashes when the channel is freed like below one: Unable to handle kernel paging request at virtual address 0080000400000008 [0080000400000008] address between user and kernel address ranges Internal error: Oops: 96000044 [Kwiboo#1] PREEMPT SMP Modules linked in: scmi_module(-) CPU: 1 PID: 2212 Comm: rmmod Not tainted 5.10.0-rc5 Kwiboo#31 Hardware name: ARM LTD ARM Juno Development Platform/ARM Juno Development Platform, BIOS EDK II Nov 19 2020 pstate: 20000085 (nzCv daIf -PAN -UAO -TCO BTYPE=--) pc : release_nodes+0x74/0x230 lr : devres_release_all+0x40/0x68 Call trace: release_nodes+0x74/0x230 devres_release_all+0x40/0x68 device_release_driver_internal+0x12c/0x1f8 driver_detach+0x58/0xe8 bus_remove_driver+0x64/0xe0 driver_unregister+0x38/0x68 platform_driver_unregister+0x1c/0x28 scmi_driver_exit+0x38/0x44 [scmi_module] __arm64_sys_delete_module+0x188/0x260 el0_svc_common.constprop.0+0x80/0x1a8 do_el0_svc+0x2c/0x98 el0_sync_handler+0x160/0x168 el0_sync+0x174/0x180 Code: 1400000d eb07009f 54000460 f9400486 (f90004a6) ---[ end trace c55ffd306c140233 ]--- Fix it by replacing kfree with devm_kfree as required. Fixes: 7002ca2 ("mailbox: arm_mhu: Add ARM MHU doorbell driver") Reported-by: Cristian Marussi <cristian.marussi@arm.com> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> Tested-by: Cristian Marussi <cristian.marussi@arm.com> Reviewed-by: Cristian Marussi <cristian.marussi@arm.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>

…ext bug [ Upstream commit 3e47495 ] With lockdep enabled, we will get following warning: ar9331_switch ethernet.1:10 lan0 (uninitialized): PHY [!ahb!ethernet@1a000000!mdio!switch@10:00] driver [Qualcomm Atheros AR9331 built-in PHY] (irq=13) BUG: sleeping function called from invalid context at kernel/locking/mutex.c:935 in_atomic(): 1, irqs_disabled(): 1, non_block: 0, pid: 18, name: kworker/0:1 INFO: lockdep is turned off. irq event stamp: 602 hardirqs last enabled at (601): [<8073fde0>] _raw_spin_unlock_irq+0x3c/0x80 hardirqs last disabled at (602): [<8073a4f4>] __schedule+0x184/0x800 softirqs last enabled at (0): [<80080f60>] copy_process+0x578/0x14c8 softirqs last disabled at (0): [<00000000>] 0x0 CPU: 0 PID: 18 Comm: kworker/0:1 Not tainted 5.10.0-rc3-ar9331-00734-g7d644991df0c Kwiboo#31 Workqueue: events deferred_probe_work_func Stack : 80980000 80980000 8089ef70 80890000 804b5414 80980000 00000002 80b53728 00000000 800d1268 804b5414 ffffffde 00000017 800afe08 81943860 0f5bfc32 00000000 00000000 8089ef70 819436c0 ffffffea 00000000 00000000 00000000 8194390c 808e353c 0000000f 66657272 80980000 00000000 00000000 80890000 804b5414 80980000 00000002 80b53728 00000000 00000000 00000000 80d40000 ... Call Trace: [<80069ce0>] show_stack+0x9c/0x140 [<800afe08>] ___might_sleep+0x220/0x244 [<8073bfb0>] __mutex_lock+0x70/0x374 [<8073c2e0>] mutex_lock_nested+0x2c/0x38 [<804b5414>] regmap_update_bits_base+0x38/0x8c [<804ee584>] regmap_update_bits+0x1c/0x28 [<804ee714>] ar9331_sw_unmask_irq+0x34/0x60 [<800d91f0>] unmask_irq+0x48/0x70 [<800d93d4>] irq_startup+0x114/0x11c [<800d65b4>] __setup_irq+0x4f4/0x6d0 [<800d68a0>] request_threaded_irq+0x110/0x190 [<804e3ef0>] phy_request_interrupt+0x4c/0xe4 [<804df508>] phylink_bringup_phy+0x2c0/0x37c [<804df7bc>] phylink_of_phy_connect+0x118/0x130 [<806c1a64>] dsa_slave_create+0x3d0/0x578 [<806bc4ec>] dsa_register_switch+0x934/0xa20 [<804eef98>] ar9331_sw_probe+0x34c/0x364 [<804eb48c>] mdio_probe+0x44/0x70 [<8049e3b4>] really_probe+0x30c/0x4f4 [<8049ea10>] driver_probe_device+0x264/0x26c [<8049bc10>] bus_for_each_drv+0xb4/0xd8 [<8049e684>] __device_attach+0xe8/0x18c [<8049ce58>] bus_probe_device+0x48/0xc4 [<8049db70>] deferred_probe_work_func+0xdc/0xf8 [<8009ff64>] process_one_work+0x2e4/0x4a0 [<800a0770>] worker_thread+0x2a8/0x354 [<800a774c>] kthread+0x16c/0x174 [<8006306c>] ret_from_kernel_thread+0x14/0x1c ar9331_switch ethernet.1:10 lan1 (uninitialized): PHY [!ahb!ethernet@1a000000!mdio!switch@10:02] driver [Qualcomm Atheros AR9331 built-in PHY] (irq=13) DSA: tree 0 setup To fix it, it is better to move access to MDIO register to the .irq_bus_sync_unlock call back. Fixes: ec6698c ("net: dsa: add support for Atheros AR9331 built-in switch") Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Link: https://lore.kernel.org/r/20201211110317.17061-1-o.rempel@pengutronix.de Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>

Kwiboo closed this as completed Jan 1, 2020

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

Screen blinking #31

Screen blinking #31

HateGitHub commented Jan 27, 2018

HateGitHub commented Jan 28, 2018

Screen blinking #31

Screen blinking #31

Comments

HateGitHub commented Jan 27, 2018

HateGitHub commented Jan 28, 2018