EddyPro GUI v7.0.4

7.0.4 (2019-06-20)

- Fix creation of log file directory at startup
- Fix time-lag dialog double popup during file uploading
- Update README

EddyPro GUI v7.0.3

7.0.3 (2019-06-08)

- Add: Fluxnet output settings
- Add: visual tool for wind directions filtering settings to specify up to
  16 sectors
- Add: random uncertainty estimation method after Mahrt (1998)
- Add: new supported anemometers: Metek uSonic-3 Class A MP
  and Metek uSonic-3 Cage MP
- Change: move random uncertainty settings from
  [RawProcess_RandomUncertainty_Settings] to [Project] managing backward
  compatibility
- Remove: obsolete GHG-Europe and AmeriFlux outputs
- Remove: previous data results setting

EddyPro GUI v6.2.2

6.2.2 (2018-05-11)

- Add: support for Young 81000V, 81000RE, 81000VRE sonic anemometers.
- Add: references to the Tovi platform.
- Fix: Raw File Settings persistency.
- Fix: local help not showing.

EddyPro GUI v6.2.1

6.2.1 (2017-10-09)

- Add: support for new LI-7500DS instruments.
- Fix: magnetic declination retrieval from NOAA.

EddyPro GUI v6.2.0

v6.2.0 (2016-08-23)

- Fix: make non blocking a zero flow rate gas analyzer description.
- Fix: make sure that an ignored variable in the metadata raw file description
  table has almost all the fields disabled.
- Fix: toolbar with no labels in initial maximized state.
- Fix: inconsistent value of the data set available date on the detect
  range dialog showing when running in advanced mode.

- Refine: make sure that on Mac is possible to load any kind of external
  biomet files.
- Refine: remove italic from anemometer firmware version.
- Refine: trim spaces reading variables in external biomet files.

- Add: set the Angle of Attack checkbox default setting to disabled.
- Add: "Build Continuous Dataset" to the Minimal Advanced Output Settings
  (the current default).
- Add: some textual hint in the metadata tables.
- Add: accept Gill Windmaster/Pro two or three fields firmware versions.
- Add: change max plausibility range from 12 to 20 sigma as per user request.
- Add: enable drag and drop tips on Windows.
- Add: the registered trademark symbol to the main window title.
- Add: master Anemometer Flags combo in Basic Settings page.
- Add: support for Campbell CSAT-3B.
- Add: raise variable flags decimals from 4 to 10 digits.
- Add: make anemometer firmware version mandatory for Gill WindMaster/Pro.
- Add: checkbox for Gill's w-boost bug.

EddyPro GUI v6.1.0

v6.1.0 (2015-12-14)

- Add: support for new LI-7500RS and LI-7200RS instruments.
- Refine: add automatic selection for the AoA correction method.
- Refine: set the default AoA correction method to automatic selection.
- Add: embedded software version (firmware) field in the anemometer
  description table in the metadata editor.
- Refine: enable embedded software version (firmware) field for any
  gas analyzer and change it to a free text form.
- Refine: allow project file opening with double-click on Mac.
- Fix: spectral file assessment load button not working properly.
- Fix: essential file path not properly preserved during a run on Windows.

EddyPro GUI v6.0.0

v6.0.0 (2015-08-05)

- Add: built and packaged the Mac OS X version.
- Add: graphic design review.
- Add: implement drag and drop capabilities in the fie system browsing
  widgets.
- Add: implement warning level guided mode messages, for example to notify
  when IRGA separations and flow rate are not greater than zero.
- Add: new checkbox 'Ensemble averaged spectra' in the output settings page.
- Add: introduce handling of file name format in case of GHG files.
- Add: new setting for (co)spectra filtering according to Mauder and
  Foken, 2004.
- Add: new despiking method after Mauder et al. 2013.
- Refinement: change label of units in Turbulent Fluctuations time constant
  from [m] to [min].
- Refinement: verify that is possible to run multiple instances of the
  program at the same time.
- Refinement: set default time lag test to the nominal values in the
  Raw file description.
- Refinement: remove 7zip dependency to read/write zip files.
- Refinement: extract 'spectral' settings from spectral corrections, make
  it more general and review spectral analysis page.
- Refinement: clean the metadata file path opening a project with an
  inexistent metadata file.
- Refinement: review WPL correction interface.
- Refinement: improve detection of start/end date of dataset with
  'Detect dataset dates'.
- Refinement: remove setting automatically the Angle of Attack correction.
- Refinement: set a maximum limit to 'Missing samples allowance' of 40%, as
  already implemented in the Engine.
- Refinement: improve update notification message reminding the
  SmartFlux update too.
- Refinement: review policies for start/end dates settings.

EddyPro GUI v5.2.1

v5.2.1 (2015-01-29)

- Add: Save and Continue buttons to Spectral, Planar fit and
  Time lag assessment files testing dialog.
- Fix: Time lag assessment file testing crash in case of missing
  RH classes.
- Fix: Planar fit assessment file testing too restrictive.
- Fix: 4th gas molecular weight and diffusivity automatic management.
- Fix: magnetic declination retrieval from NOAA website was broken
  due to changes in the website response.

EddyPro GUI v5.2.0

v5.2.0 (2014-11-20)

- Improve information available in Run page (for example, show warnings and
  errors, computate time estimates, etc).
- Improve progress bars in Run page.
- Add separation of Standard variables and Custom variables in the Metadata
  editor Raw file description. Provide a Clear button for the Custom
  variables.
- Integrate Massman 2000/2001 correction.
- Implement testing of ancillary files (Spectral correction assessment,
  Planar fit and Time lag optimization) at loading time.
- Add a dialog to inform about the Angle of attack automatic selection.
- Add an 'Open output directory' button in Run page.
- Add keyboard shortcuts to navigate between pages (Alt+1...Alt+5).
- Fix minor bugs.

EddyPro GUI v5.1.1

v5.1.1 (2014-03-04)

- No GUI changes (intial commit on GitHub).