Zorro 2 IDE Interface for Amiga 2000/3000/4000
Tested and working.
- Autoboot
- ROM can be updated simply by booting the update disk
- Works with Kickstart 1.3 and up
- Supports up to 2TB drives
- Supports ATAPI Devices (CD/DVD-ROM, Zip disk etc)
- Boot from ZIP/LS-120 etc
- Boot from CD-ROM
- SCSI Direct, NSD, TD64 support
- Uses lide.device
For more information on these features please see the lide.device readme
You can find the latest Gerbers attached to the latest Release
I recommend ordering from JLCPCB as this board was designed within their 2-layer specifications
BOM and Placement files for JLCPCBs assembly service are provided and can be found inside the Gerbers folder and the Gerbers.zip file found under Releases
Recommended options when ordering:
- Thickness: 1.6mm
- Surface Finish: ENIG-RoHS
- Gold Fingers: Yes
- 45°finger chamfered: Yes
To program the Flash, simply boot the latest lide-update.adf boot disk
The CPLD can be programmed using a Raspberry Pi as described by LinuxJedi
| References | Qty | Value | Footprint | Link |
|---|---|---|---|---|
| C1,C12 | 2 | 47uF 16V | CP_Radial_D5.0mm_P2.50mm | Mouser |
| C3,C2 | 2 | 10uF Tantalum | 1206 | Mouser |
| C9,C4,C5,C7,C11,C8,C6,C10 | 8 | 0.1uF Ceramic | 0603 | Mouser |
| D1 | 1 | BAT54A | SOT-23 | Mouser |
| D2 | 1 | SMD LED | 0603 | Mouser |
| F1 | 1 | 2A Polyfuse | 1812 | Mouser |
| J1 | 1 | JTAG Header | 1x06 2.54mm Pin Header | |
| J4,J3 | 2 | IDE Cennector, Right-angle | 2x20 2.54mm Right-angle IDC | Mouser |
| J5 | 1 | Disable Jumper | 1x02 2.54mm Pin Header | |
| J6 | 1 | LED Header | 1x04 2.54mm Pin Header | |
| J7,J2 | 2 | KEY_PWR | 1x02 2.54mm Pin Header | |
| Q1 | 1 | BC857BS | SOT-363 | Mouser |
| R10 | 1 | 150 Ohm | 0603 | Mouser |
| R12,R1,R8,R13,R11,R9 | 6 | 10K Ohm | 0603 | Mouser |
| R14,R5,R2,R3 | 4 | 68 Ohm | 0603 | Mouser |
| R17 | 1 | 330 Ohm | 0603 | Mouser |
| R6,R4,R15,R16,R7 | 5 | 1K Ohm | 0603 | Mouser |
| U1 | 1 | LM1117-3.3 | SOT-223-3 | Mouser |
| U2 | 1 | SST39SF010 | TSOP-32 | Mouser |
| U3 | 1 | XC9572XL-VQ64 | VQFP-64 | Mouser |
| U6,U5,U4 | 3 | 74HCT245 | TSSOP-20 | Mouser |
Thanks to:
- GadgetUK164, Screemo, Sparx, Mafitzee, Pillock for Beta testing the board
- Stefan Reinauer and Chris Hooper for creating the Open-Source A4091 driver which was the inspiration to create lide.device used by RIPPLE
RIPPLE IDE is covered by a GPL 2.0 Only license
