Skip to content

Arduino library for the Updated PZEM-004T v3.0 Power and Energy meter

License

Notifications You must be signed in to change notification settings

LeighAS/PZEM-004T-v30

 
 

Repository files navigation

PZEM-004T v3.0

Arduino communication library for Peacefair PZEM-004T-10A and PZEM-004T-100A v3.0 Energy monitor.


This module is an upgraded version of the PZEM-004T with frequency and power factor measurement features available at the usual places. It communicates using a TTL interface over a Modbus-RTU like communication protocol but is incompatible with the older @olehs library found here: https://github.com/olehs/PZEM004T. I would like to thank @olehs for the great library which inspired me to write this one.

Manufacturer (optimistic) specifications

Function Measuring range Resolution Accuracy TODO: Realistic specifications
Voltage 80~260V 0.1V 0.5%
Current 0~10A or 0~100A* 0.01A or 0.02A* 0.5%
Active power 0~2.3kW or 0~23kW* 0.1W 0.5%
Active energy 0~9999.99kWh 1Wh 0.5%
Frequency 45~65Hz 0.1Hz 0.5%
Power factor 0.00~1.00 0.01 1%

* Using the external current transformer instead of the built in shunt

Other features

  • 247 unique programmable slave addresses
    • Enables multiple slaves to use the same Serial interface
  • Over power alarm
  • Energy counter reset
  • CRC16 checksum
  • Better, but not perfect mains isolation

Example

#include <PZEM004Tv30.h>

PZEM004Tv30 pzem(&Serial3);

void setup() {
  Serial.begin(115200);

  Serial.print("Reset Energy");
  pzem.resetEnergy();


  Serial.print("Set address to 0x42");
  pzem.setAddress(0x42);
}

void loop() {
  float volt = pzem.voltage();
  Serial.print("Voltage: ");
  Serial.print(volt);
  Serial.println("V");

  float cur = pzem.current();
  Serial.print("Current: ");
  Serial.print(cur);
  Serial.println("A");

  float powe = pzem.power();
  Serial.print("Power: ");
  Serial.print(powe);
  Serial.println("W");

  float ener = pzem.energy();
  Serial.print("Energy: ");
  Serial.print(ener,3);
  Serial.println("kWh");

  float freq = pzem.frequency();
  Serial.print("Frequency: ");
  Serial.print(freq);
  Serial.println("Hz");

  float pf = pzem.pf();
  Serial.print("PF: ");
  Serial.println(pf);

  delay(1000);
}

Thank you to @olehs for inspiring this library.

About

Arduino library for the Updated PZEM-004T v3.0 Power and Energy meter

Resources

License

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published

Languages

  • C++ 100.0%