librecad_pl.ts

<?xml version="1.0" encoding="utf-8"?>
<!DOCTYPE TS>
<TS version="2.1" language="pl">
<context>
    <name>ColorWizard</name>
    <message>
        <source>Frame</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Add to favorites</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>...</source>
        <translation type="unfinished">...</translation>
    </message>
</context>
<context>
    <name>ComboBoxOption</name>
    <message>
        <source>Frame</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>GroupBox</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Set</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>DlgSplinePoints</name>
    <message>
        <source>SplinePoints</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Layer:</source>
        <translation type="unfinished">Warstwa:</translation>
    </message>
    <message>
        <source>Geometry</source>
        <translation type="unfinished">Geometria</translation>
    </message>
    <message>
        <source>Closed</source>
        <translation type="unfinished">Zamknięta</translation>
    </message>
    <message>
        <source>Spline Points</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Control Points</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Points on Spline</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>LC_ActionDimArc</name>
    <message>
        <source>Select arc entity</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Cancel</source>
        <translation type="unfinished">Anuluj</translation>
    </message>
    <message>
        <source>Specify dimension arc location</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>LC_ActionDrawCircle2PR</name>
    <message>
        <source>radius=%1 is too small for points selected
distance between points=%2 is larger than diameter=%3</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Select from two possible circle centers</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Specify first point</source>
        <translation type="unfinished">Wskaż pierwszy punkt</translation>
    </message>
    <message>
        <source>Cancel</source>
        <translation type="unfinished">Anuluj</translation>
    </message>
    <message>
        <source>Specify second point</source>
        <translation type="unfinished">Wskaż drugi punkt</translation>
    </message>
    <message>
        <source>Back</source>
        <translation type="unfinished">Wstecz</translation>
    </message>
    <message>
        <source>Select circle center</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>LC_ActionDrawLinePolygonCenTan</name>
    <message>
        <source>Specify center</source>
        <translation type="unfinished">Wskaż środek</translation>
    </message>
    <message>
        <source>Specify a tangent</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Enter number:</source>
        <translation type="unfinished">Wprowadź liczbę:</translation>
    </message>
    <message>
        <source>Not a valid number. Try 1..9999</source>
        <translation type="unfinished">Nieprawidłowa liczba. Spróbuj 1..9999</translation>
    </message>
    <message>
        <source>Not a valid expression</source>
        <translation type="unfinished">Nieprawidłowe wyrażenie</translation>
    </message>
</context>
<context>
    <name>LC_ActionDrawSplinePoints</name>
    <message>
        <source>Specify first control point</source>
        <translation type="unfinished">Wskaż pierwszy punkt kontrolny</translation>
    </message>
    <message>
        <source>Cancel</source>
        <translation type="unfinished">Anuluj</translation>
    </message>
    <message>
        <source>Specify next control point or [%1]</source>
        <translation type="unfinished">Wskaż następny punkt kontrolny lub [%1]</translation>
    </message>
    <message>
        <source>Back</source>
        <translation type="unfinished">Wstecz</translation>
    </message>
    <message>
        <source>Specify next control point</source>
        <translation type="unfinished">Wskaż następny punkt kontrolny</translation>
    </message>
    <message>
        <source>Cannot undo: Not enough entities defined yet.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Cannot undo: Nothing could be redone.</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>LC_ActionFactory</name>
    <message>
        <source>&amp;Window Zoom</source>
        <translation type="unfinished">&amp;Okno powiększenia</translation>
    </message>
    <message>
        <source>Zoom &amp;Panning</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Select Entity</source>
        <translation type="unfinished">Zaznacz obiekt</translation>
    </message>
    <message>
        <source>Select Window</source>
        <translation type="unfinished">Zaznacz okno</translation>
    </message>
    <message>
        <source>Deselect Window</source>
        <translation type="unfinished">Odznacz okno</translation>
    </message>
    <message>
        <source>(De-)Select &amp;Contour</source>
        <translation type="unfinished">(Za/Od)znacz &amp;Kontur</translation>
    </message>
    <message>
        <source>Select Intersected Entities</source>
        <translation type="unfinished">Zaznacz przecinające się obiekty</translation>
    </message>
    <message>
        <source>Deselect Intersected Entities</source>
        <translation type="unfinished">Odznacz obiekty, które się przecinają</translation>
    </message>
    <message>
        <source>(De-)Select Layer</source>
        <translation type="unfinished">(Za/Od)znacz warstwę</translation>
    </message>
    <message>
        <source>&amp;Points</source>
        <translation type="unfinished">&amp;Punkty</translation>
    </message>
    <message>
        <source>&amp;2 Points</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>&amp;Angle</source>
        <translation type="unfinished">&amp;Kąt</translation>
    </message>
    <message>
        <source>&amp;Horizontal</source>
        <translation type="unfinished">&amp;Poziomo</translation>
    </message>
    <message>
        <source>Vertical</source>
        <translation type="unfinished">Pionowy</translation>
    </message>
    <message>
        <source>&amp;Freehand Line</source>
        <translation type="unfinished">&amp;Odręczna linia</translation>
    </message>
    <message>
        <source>&amp;Parallel</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Parallel through point</source>
        <translation type="unfinished">Równolegle poprzez punkt</translation>
    </message>
    <message>
        <source>Rectangle</source>
        <translation type="unfinished">Prostokąt</translation>
    </message>
    <message>
        <source>Bisector</source>
        <translation type="unfinished">Dwusieczna</translation>
    </message>
    <message>
        <source>Tangent (P,C)</source>
        <translation type="unfinished">Styczna (P,C)</translation>
    </message>
    <message>
        <source>Tangent (C,C)</source>
        <translation type="unfinished">Styczna (C,C)</translation>
    </message>
    <message>
        <source>Tangent &amp;Orthogonal</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Orthogonal</source>
        <translation type="unfinished">Prostopadła</translation>
    </message>
    <message>
        <source>Relative angle</source>
        <translation type="unfinished">Kąt względny</translation>
    </message>
    <message>
        <source>Pol&amp;ygon (Cen,Cor)</source>
        <translation type="unfinished">Wie&amp;lobok (śr.,wierzch.)</translation>
    </message>
    <message>
        <source>Polygo&amp;n (Cor,Cor)</source>
        <translation type="unfinished">Wie&amp;lobok (wierzch.,wierzch.)</translation>
    </message>
    <message>
        <source>Center, &amp;Point</source>
        <translation type="unfinished">Środek, &amp;punkt</translation>
    </message>
    <message>
        <source>Center, &amp;Radius</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>2 Points</source>
        <translation type="unfinished">2 punkty</translation>
    </message>
    <message>
        <source>2 Points, Radius</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>3 Points</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>&amp;Concentric</source>
        <translation type="unfinished">&amp;Koncentryczny</translation>
    </message>
    <message>
        <source>Circle &amp;Inscribed</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Tangential 2 Circles, Radius</source>
        <comment>circle tangential with two circles, and given radius</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Tangential 2 Circles, 1 Point</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Tangential &amp;3 Circles</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Tangential, 2 P&amp;oints</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>&amp;Center, Point, Angles</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>&amp;3 Points</source>
        <translation type="unfinished">&amp;3 Punkty</translation>
    </message>
    <message>
        <source>Arc &amp;Tangential</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>&amp;Ellipse (Axis)</source>
        <translation type="unfinished">&amp;Elipsa (oś)</translation>
    </message>
    <message>
        <source>Ellipse &amp;Arc (Axis)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Ellipse &amp;Foci Point</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Ellipse &amp;4 Point</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Ellipse Center and &amp;3 Points</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Ellipse &amp;Inscribed</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>&amp;Spline</source>
        <translation type="unfinished">&amp;Krzywa składana</translation>
    </message>
    <message>
        <source>&amp;Spline through points</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>&amp;Polyline</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>&amp;Add node</source>
        <translation type="unfinished">&amp;Dodaj wierzchołek</translation>
    </message>
    <message>
        <source>A&amp;ppend node</source>
        <translation type="unfinished">Dodaj &amp;wierzchołek</translation>
    </message>
    <message>
        <source>&amp;Delete node</source>
        <translation type="unfinished">&amp;Usuń wierzchołek</translation>
    </message>
    <message>
        <source>Delete &amp;between two nodes</source>
        <translation type="unfinished">Usuń &amp;pomiędzy wierzchołkami</translation>
    </message>
    <message>
        <source>&amp;Trim segments</source>
        <translation type="unfinished">&amp;Przytnij odcinek</translation>
    </message>
    <message>
        <source>Create &amp;Equidistant Polylines</source>
        <translation type="unfinished">Utwórz &amp;równoodległą łamaną</translation>
    </message>
    <message>
        <source>Create Polyline from Existing &amp;Segments</source>
        <translation type="unfinished">Utwórz linię łamaną z &amp;istniejących obiektów</translation>
    </message>
    <message>
        <source>&amp;MText</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>&amp;Text</source>
        <translation type="unfinished">&amp;Tekst</translation>
    </message>
    <message>
        <source>&amp;Hatch</source>
        <translation type="unfinished">&amp;Kreskowanie</translation>
    </message>
    <message>
        <source>Insert &amp;Image</source>
        <translation type="unfinished">Wstaw obraz</translation>
    </message>
    <message>
        <source>&amp;Aligned</source>
        <translation type="unfinished">&amp;Wyrównany</translation>
    </message>
    <message>
        <source>&amp;Linear</source>
        <translation type="unfinished">&amp;Liniowy</translation>
    </message>
    <message>
        <source>&amp;Vertical</source>
        <translation type="unfinished">&amp;Pionowa</translation>
    </message>
    <message>
        <source>&amp;Radial</source>
        <translation type="unfinished">P&amp;romieniowy</translation>
    </message>
    <message>
        <source>&amp;Diametric</source>
        <translation type="unfinished">Śre&amp;dnicowy</translation>
    </message>
    <message>
        <source>&amp;Angular</source>
        <translation type="unfinished">&amp;Kątowy</translation>
    </message>
    <message>
        <source>&amp;Leader</source>
        <translation type="unfinished">&amp;Odnośnik</translation>
    </message>
    <message>
        <source>&amp;Attributes</source>
        <translation type="unfinished">&amp;Atrybuty</translation>
    </message>
    <message>
        <source>&amp;Delete</source>
        <translation type="unfinished">&amp;Usuń</translation>
    </message>
    <message>
        <source>Delete Freehand</source>
        <translation type="unfinished">Usuń odręcznie</translation>
    </message>
    <message>
        <source>&amp;Move / Copy</source>
        <translation type="unfinished">&amp;Przesuń / kopiuj</translation>
    </message>
    <message>
        <source>Re&amp;vert direction</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Ctrl+R</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>&amp;Rotate</source>
        <translation type="unfinished">&amp;Obracaj</translation>
    </message>
    <message>
        <source>&amp;Scale</source>
        <translation type="unfinished">&amp;Skaluj</translation>
    </message>
    <message>
        <source>&amp;Mirror</source>
        <translation type="unfinished">&amp;Odbijaj</translation>
    </message>
    <message>
        <source>Rotate T&amp;wo</source>
        <translation type="unfinished">Obróć &amp;dwa</translation>
    </message>
    <message>
        <source>&amp;Properties</source>
        <translation type="unfinished">&amp;Właściowści</translation>
    </message>
    <message>
        <source>&amp;Trim</source>
        <translation type="unfinished">Przytni&amp;j</translation>
    </message>
    <message>
        <source>&amp;Lengthen</source>
        <translation type="unfinished">&amp;Wydłuż</translation>
    </message>
    <message>
        <source>&amp;Divide</source>
        <translation type="unfinished">Podzie&amp;l</translation>
    </message>
    <message>
        <source>&amp;Stretch</source>
        <translation type="unfinished">&amp;Rozciągnij</translation>
    </message>
    <message>
        <source>&amp;Bevel</source>
        <translation type="unfinished">&amp;Zetnij</translation>
    </message>
    <message>
        <source>&amp;Fillet</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>&amp;Explode Text into Letters</source>
        <translation type="unfinished">&amp;Rozbij tekst na litery</translation>
    </message>
    <message>
        <source>Point inside contour</source>
        <translation type="unfinished">Punkt wewnątrz konturu</translation>
    </message>
    <message>
        <source>&amp;Distance Point to Point</source>
        <translation type="unfinished">&amp;Odległość punkt - punkt</translation>
    </message>
    <message>
        <source>&amp;Distance Entity to Point</source>
        <translation type="unfinished">&amp;Odległość obiektu do punktu</translation>
    </message>
    <message>
        <source>An&amp;gle between two lines</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>&amp;Total length of selected entities</source>
        <translation type="unfinished">&amp;Całkowita długość zaznaczonych obiektów</translation>
    </message>
    <message>
        <source>Polygonal &amp;Area</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>&amp;Selection pointer</source>
        <translation type="unfinished">Wskaźnik &amp;wyboru</translation>
    </message>
    <message>
        <source>&amp;Undo</source>
        <translation type="unfinished">&amp;Cofnij</translation>
    </message>
    <message>
        <source>&amp;Redo</source>
        <translation type="unfinished">P&amp;onów</translation>
    </message>
    <message>
        <source>Cu&amp;t</source>
        <translation type="unfinished">Wy&amp;tnij</translation>
    </message>
    <message>
        <source>&amp;Copy</source>
        <translation type="unfinished">&amp;Kopiuj</translation>
    </message>
    <message>
        <source>&amp;Paste</source>
        <translation type="unfinished">&amp;Wklej</translation>
    </message>
    <message>
        <source>move to bottom</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>lower after entity</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>raise over entity</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>move to top</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>&amp;Add Layer</source>
        <translation type="unfinished">&amp;Dodaj warstwę</translation>
    </message>
    <message>
        <source>&amp;Remove Layer</source>
        <translation type="unfinished">&amp;Usuń warstwę</translation>
    </message>
    <message>
        <source>&amp;Edit Layer</source>
        <translation type="unfinished">&amp;Edytuj warstwę</translation>
    </message>
    <message>
        <source>Toggle Layer Loc&amp;k</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>&amp;Toggle Layer Visibility</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Toggle Layer &amp;Print</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Toggle &amp;Construction Layer</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>&amp;Add Block</source>
        <translation type="unfinished">&amp;Dodaj blok</translation>
    </message>
    <message>
        <source>&amp;Remove Block</source>
        <translation type="unfinished">&amp;Usuń blok</translation>
    </message>
    <message>
        <source>&amp;Rename Block</source>
        <translation type="unfinished">&amp;Zmień nazwę bloku</translation>
    </message>
    <message>
        <source>&amp;Edit Block</source>
        <translation type="unfinished">&amp;Edytuj blok</translation>
    </message>
    <message>
        <source>&amp;Save Block</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>&amp;Insert Block</source>
        <translation type="unfinished">&amp;Wstaw blok</translation>
    </message>
    <message>
        <source>Toggle Block &amp;Visibility</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>&amp;Create Block</source>
        <translation type="unfinished">&amp;Stwórz blok</translation>
    </message>
    <message>
        <source>Ex&amp;plode</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>&amp;Application Preferences</source>
        <translation type="unfinished">Preferencje &amp;aplikacji</translation>
    </message>
    <message>
        <source>Current &amp;Drawing Preferences</source>
        <translation type="unfinished">&amp;Preferencje bieżącego rysunku</translation>
    </message>
    <message>
        <source>&amp;Delete selected</source>
        <translation type="unfinished">&amp;Usuń zaznaczone</translation>
    </message>
    <message>
        <source>Select &amp;All</source>
        <translation type="unfinished">Zaznacz &amp;wszystko</translation>
    </message>
    <message>
        <source>Deselect &amp;all</source>
        <translation type="unfinished">Odznacz &amp;wszystko</translation>
    </message>
    <message>
        <source>Ctrl+K</source>
        <translation type="unfinished">Ctrl+K</translation>
    </message>
    <message>
        <source>Invert Selection</source>
        <translation type="unfinished">Odwróć zaznaczenie</translation>
    </message>
    <message>
        <source>Zoom &amp;In</source>
        <translation type="unfinished">&amp;Powiększ</translation>
    </message>
    <message>
        <source>Zoom &amp;Out</source>
        <translation type="unfinished">Po&amp;mniejsz</translation>
    </message>
    <message>
        <source>&amp;Auto Zoom</source>
        <translation type="unfinished">&amp;Autozoom</translation>
    </message>
    <message>
        <source>Previous &amp;View</source>
        <translation type="unfinished">Poprzedni &amp;widok</translation>
    </message>
    <message>
        <source>&amp;Redraw</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>&amp;New</source>
        <translation type="unfinished">&amp;Nowy</translation>
    </message>
    <message>
        <source>New From &amp;Template</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>&amp;Open...</source>
        <translation type="unfinished">&amp;Otwórz...</translation>
    </message>
    <message>
        <source>&amp;Save</source>
        <translation type="unfinished">&amp;Zapisz</translation>
    </message>
    <message>
        <source>Save &amp;as...</source>
        <translation type="unfinished">Zapisz &amp;jako...</translation>
    </message>
    <message>
        <source>&amp;Export as image</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>&amp;Close</source>
        <translation type="unfinished">Za&amp;mknij</translation>
    </message>
    <message>
        <source>&amp;Print...</source>
        <translation type="unfinished">&amp;Drukuj...</translation>
    </message>
    <message>
        <source>Export as PDF</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Print Pre&amp;view</source>
        <translation type="unfinished">&amp;Podgląd wydruku</translation>
    </message>
    <message>
        <source>&amp;Quit</source>
        <translation type="unfinished">Za&amp;kończ</translation>
    </message>
    <message>
        <source>&amp;Block</source>
        <translation type="unfinished">&amp;Blok</translation>
    </message>
    <message>
        <source>&amp;Fullscreen</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>&amp;Grid</source>
        <translation type="unfinished">&amp;Siatka</translation>
    </message>
    <message>
        <source>Ctrl+G</source>
        <comment>Toggle Grid</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>&amp;Draft</source>
        <translation type="unfinished">O&amp;brys</translation>
    </message>
    <message>
        <source>&amp;Statusbar</source>
        <translation type="unfinished">&amp;Pasek stanu</translation>
    </message>
    <message>
        <source>Ctrl+I</source>
        <comment>Hide Statusbar</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Focus on &amp;Command Line</source>
        <translation type="unfinished">Aktywuj linię &amp;poleceń</translation>
    </message>
    <message>
        <source>Widget Options</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Left</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Right</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Top</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Bottom</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Floating</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Reload Style Sheet</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Device Options</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Mo&amp;ve and Rotate</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Tr&amp;im Two</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>O&amp;ffset</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Menu Creator</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Toolbar Creator</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Ctrl+D</source>
        <comment>Toggle Draft Mode</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Pol&amp;ygon (Cen,Tan)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>&amp;Arc</source>
        <translation type="unfinished">Ł&amp;uk</translation>
    </message>
    <message>
        <source>&amp;Show all layers</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>&amp;Hide all layers</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>&amp;Unlock all</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>&amp;Lock all</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>&amp;Export Selected Layer(s)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Export &amp;Visible Layer(s)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>&amp;Show all blocks</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>&amp;Hide all blocks</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Export as CA&amp;M/plain SVG...</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Close All</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Re-dock Widgets</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Save A&amp;ll...</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>LC_ActionFileExportMakerCam</name>
    <message>
        <source>Export as</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>LC_ActionLayersExport</name>
    <message>
        <source>Saving layer &quot;%1&quot; as &quot;%2&quot; </source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>LC_DeviceOptions</name>
    <message>
        <source>Form</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Device</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Save</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>LC_SimpleTests</name>
    <message>
        <source>De&amp;bugging</source>
        <translation type="unfinished">De&amp;bugging</translation>
    </message>
    <message>
        <source>Insert Image</source>
        <translation type="unfinished">Wstaw obraz</translation>
    </message>
</context>
<context>
    <name>LC_WidgetFactory</name>
    <message>
        <source>Library Browser</source>
        <translation type="unfinished">Przeglądarka bibliotek</translation>
    </message>
    <message>
        <source>Command line</source>
        <translation type="unfinished">Linia poleceń</translation>
    </message>
    <message>
        <source>Dock</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Float</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Lines</source>
        <translation type="unfinished">Linie</translation>
    </message>
    <message>
        <source>Circles</source>
        <translation type="unfinished">Okręgi</translation>
    </message>
    <message>
        <source>Freehand</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Ellipses</source>
        <translation type="unfinished">Elipsy</translation>
    </message>
    <message>
        <source>PolyLines</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Select</source>
        <translation type="unfinished">Zaznacz</translation>
    </message>
    <message>
        <source>Dimensions</source>
        <translation type="unfinished">Wymiarowanie</translation>
    </message>
    <message>
        <source>Modify</source>
        <translation type="unfinished">Zmień</translation>
    </message>
    <message>
        <source>Measure</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>LC_WidgetOptionsDialog</name>
    <message>
        <source>Widget Options</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Toolbar</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Icon Size</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>General</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Style</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Style Sheet</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Statusbar</source>
        <translation type="unfinished">Pasek stanu</translation>
    </message>
    <message>
        <source>Height</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Font Size</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Input the path of a Qt style sheet.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>side length in pixels</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Use themed icons</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>LG_DimzerosBox</name>
    <message>
        <source>select:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>remove left</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>remove right</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>remove 0&apos;</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>remove 0&quot;</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>PolylineEquidistantOptions</name>
    <message>
        <source>Line Relative Angle Options</source>
        <translation type="unfinished">Opcje linii z kątem względnym</translation>
    </message>
    <message>
        <source>Spacing:</source>
        <translation type="unfinished">Odstęp:</translation>
    </message>
    <message>
        <source>Distance from original polyline</source>
        <translation type="unfinished">Odległość od początkowej polilinii</translation>
    </message>
    <message>
        <source>Copies:</source>
        <translation type="unfinished">Kopie:</translation>
    </message>
</context>
<context>
    <name>QC_ActionGetEnt</name>
    <message>
        <source>Select object:</source>
        <translation>Wybierz obiekt:</translation>
    </message>
    <message>
        <source>Cancel</source>
        <translation>Anuluj</translation>
    </message>
</context>
<context>
    <name>QC_ActionGetPoint</name>
    <message>
        <source>Cancel</source>
        <translation>Anuluj</translation>
    </message>
</context>
<context>
    <name>QC_ActionGetSelect</name>
    <message>
        <source>Select objects:</source>
        <translation>Wybierz obiekty:</translation>
    </message>
    <message>
        <source>Cancel</source>
        <translation>Anuluj</translation>
    </message>
</context>
<context>
    <name>QC_ApplicationWindow</name>
    <message>
        <source>&amp;File</source>
        <translation>&amp;Plik</translation>
    </message>
    <message>
        <source>&amp;Edit</source>
        <translation>&amp;Edycja</translation>
    </message>
    <message>
        <source>&amp;View</source>
        <translation>&amp;Widok</translation>
    </message>
    <message>
        <source>&amp;Select</source>
        <translation>&amp;Zaznacz</translation>
    </message>
    <message>
        <source>&amp;Line</source>
        <translation>&amp;Linia</translation>
    </message>
    <message>
        <source>&amp;Circle</source>
        <translation>&amp;Okrąg</translation>
    </message>
    <message>
        <source>&amp;Ellipse</source>
        <translation>&amp;Elipsa</translation>
    </message>
    <message>
        <source>&amp;Modify</source>
        <translation>&amp;Modyfikuj</translation>
    </message>
    <message>
        <source>&amp;Info</source>
        <translation>&amp;Info</translation>
    </message>
    <message>
        <source>About</source>
        <translation>O aplikacji</translation>
    </message>
    <message>
        <source>&amp;Help</source>
        <translation>Pomo&amp;c</translation>
    </message>
    <message>
        <source>&amp;Cascade</source>
        <translation>&amp;Kaskadowo</translation>
    </message>
    <message>
        <source>&amp;Tile</source>
        <translation>&amp;Sąsiadująco</translation>
    </message>
    <message>
        <source>Tile &amp;Horizontally</source>
        <translation>&amp;Sąsiadująco w poziomie</translation>
    </message>
    <message>
        <source>Creating new file...</source>
        <translation>Tworzenie nowego pliku...</translation>
    </message>
    <message>
        <source>unnamed document %1</source>
        <translation>nienazwany dokument %1</translation>
    </message>
    <message>
        <source>Opening recent file...</source>
        <translation>Otwieranie ostatniego pliku...</translation>
    </message>
    <message>
        <source>Loaded document: </source>
        <translation>Załadowany dokument: </translation>
    </message>
    <message>
        <source>Opening aborted</source>
        <translation>Otwieranie przerwane</translation>
    </message>
    <message>
        <source>Printing...</source>
        <translation>Drukowanie...</translation>
    </message>
    <message>
        <source>Exiting application...</source>
        <translation>Wychodzenie z aplikacji...</translation>
    </message>
    <message>
        <source>File</source>
        <translation type="unfinished">Plik</translation>
    </message>
    <message>
        <source>Edit</source>
        <translation type="unfinished">Edycja</translation>
    </message>
    <message>
        <source>View</source>
        <translation type="unfinished">Widok</translation>
    </message>
    <message>
        <source>Pen</source>
        <translation type="unfinished">Pióro</translation>
    </message>
    <message>
        <source>Tool Options</source>
        <translation type="unfinished">Opcje narzędzi</translation>
    </message>
    <message>
        <source>Layer List</source>
        <translation>Lista warstw</translation>
    </message>
    <message>
        <source>Block List</source>
        <translation>Lista bloków</translation>
    </message>
    <message>
        <source>Print preview for %1</source>
        <translation>Podgląd wydruku dla %1</translation>
    </message>
    <message>
        <source>New Drawing created.</source>
        <translation>Utworzono nowy rysunek.</translation>
    </message>
    <message>
        <source>Saving drawing...</source>
        <translation>Zapisywanie rysunku...</translation>
    </message>
    <message>
        <source>Saved drawing: %1</source>
        <translation>Zapisywanie rysunku: %1</translation>
    </message>
    <message>
        <source>Exporting drawing...</source>
        <translation>Eksportowanie rysunku...</translation>
    </message>
    <message>
        <source>Exported: %1</source>
        <translation>Eksportowane: %1</translation>
    </message>
    <message>
        <source>Exporting...</source>
        <translation>Eksportowanie...</translation>
    </message>
    <message>
        <source>Export complete</source>
        <translation>Eksportowanie zakończone</translation>
    </message>
    <message>
        <source>Export failed!</source>
        <translation>Nieudane eksportowanie!</translation>
    </message>
    <message>
        <source>Printing complete</source>
        <translation>Drukowanie zakończone</translation>
    </message>
    <message>
        <source>Command line</source>
        <translation>Linia poleceń</translation>
    </message>
    <message>
        <source>Block &apos;%1&apos;</source>
        <translation>Blok &apos;%1&apos;</translation>
    </message>
    <message>
        <source>Cannot open the file
%1
Please check the permissions.</source>
        <translation>Nie można otworzyć pliku
%1
Proszę sprawdzić prawa do odczytu.</translation>
    </message>
    <message>
        <source>&amp;Polyline</source>
        <translation>Ł&amp;amana</translation>
    </message>
    <message>
        <source>Auto-saving drawing...</source>
        <translation>Zapisywanie rysunku...</translation>
    </message>
    <message>
        <source>Auto-saved drawing</source>
        <translation>Zapisano rysunek</translation>
    </message>
    <message>
        <source>Cannot auto-save the file
%1
Please check the permissions.
Auto-save disabled.</source>
        <translation>Nie można zapisać pliku
%1
Sprawdź uprawnienia do zapisu.
Autozapis wyłączony.</translation>
    </message>
    <message>
        <source>Import</source>
        <translation>Importuj</translation>
    </message>
    <message>
        <source>&amp;Toolbars</source>
        <translation>&amp;Paski narzędzi</translation>
    </message>
    <message>
        <source>Compiled on: %1</source>
        <translation>Skompilowano: %1</translation>
    </message>
    <message>
        <source>Version: %1</source>
        <translation>Wersja: %1</translation>
    </message>
    <message>
        <source>Warning: File already opened : </source>
        <translation>Uwaga: plik jest już otwarty :</translation>
    </message>
    <message>
        <source>Cannot save the file </source>
        <translation>Nie można zapisać pliku</translation>
    </message>
    <message>
        <source> , please check the filename and permissions.</source>
        <translation>   , proszę sprawdzić nazwę pliku i uprawnienia. </translation>
    </message>
    <message>
        <source>Tile &amp;Vertically</source>
        <translation>Rozłóż Pozio&amp;mo</translation>
    </message>
    <message>
        <source>Ta&amp;b mode</source>
        <translation>Tryb &amp;zakładek</translation>
    </message>
    <message>
        <source>New document from template: </source>
        <translation>Nowy dokument z szablonu:</translation>
    </message>
    <message>
        <source>Select Template aborted</source>
        <translation>Wybór szablonu odwołany</translation>
    </message>
    <message>
        <source>Auto-saving failed</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Snap Selection</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Export as</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Compiler: Clang %1.%2.%3</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Compiler: GNU GCC %1.%2.%3</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Qt Version: %1</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Draft Mode</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Export as PDF</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Export</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Cannot open the file
%1
Please check its existence and permissions.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>File &apos;%1&apos; does not exist. Opening aborted</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Categories</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>&amp;Order</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Order</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Select</source>
        <translation type="unfinished">Zaznacz</translation>
    </message>
    <message>
        <source>Line</source>
        <translation type="unfinished">Linia</translation>
    </message>
    <message>
        <source>Circle</source>
        <translation type="unfinished">Okrąg</translation>
    </message>
    <message>
        <source>&amp;Curve</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Curve</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Ellipse</source>
        <translation type="unfinished">Elipsa</translation>
    </message>
    <message>
        <source>Polyline</source>
        <translation type="unfinished">Linia łamana</translation>
    </message>
    <message>
        <source>Dimension</source>
        <translation type="unfinished">Wymiar</translation>
    </message>
    <message>
        <source>Modify</source>
        <translation type="unfinished">Zmień</translation>
    </message>
    <message>
        <source>Info</source>
        <translation type="unfinished">Informacja</translation>
    </message>
    <message>
        <source>Dock Areas</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Grid Status</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Toolbars</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Dockwidgets</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Device Options</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Device</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>&amp;Options</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Pl&amp;ugins</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Dime&amp;nsion</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Dock Wid&amp;gets</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Recent Files</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Compiler: Microsoft Visual C++</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Boost Version: %1.%2.%3</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Copy</source>
        <translation type="unfinished">Kopiuj</translation>
    </message>
    <message>
        <source>Contributors</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>License</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>System</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Toolbar Creator</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Menu Creator</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Menu Assigner</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>&amp;Tools</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>&amp;Drawings</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Saving drawing: %1</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Save cancelled</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Closing Drawing</source>
        <translation type="unfinished">Zamykanie rysunku</translation>
    </message>
    <message>
        <source>Save changes to the following item?
%1</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>&amp;Save</source>
        <translation type="unfinished">&amp;Zapisz</translation>
    </message>
    <message>
        <source>Save &amp;as...</source>
        <translation type="unfinished">Zapisz &amp;jako...</translation>
    </message>
    <message>
        <source>&amp;Save %1</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Save %1 &amp;as...</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>&amp;Window mode</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>&amp;Layout</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Rounded</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Triangular</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>North</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>South</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>East</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>West</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>&amp;Arrange</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>&amp;Maximized</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Save All cancelled</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Close All cancelled</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>The Code</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Cmd</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Float</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Dock</source>
        <comment>Dock the command widget to the main window</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>&amp;Wiki</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>User&apos;s &amp;Manual</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>&amp;Commands</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>&amp;Style Sheets</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Wid&amp;gets</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>&amp;Forum</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Zulip &amp;Chat</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>&amp;Release Information</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>On&amp;line</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>&amp;Donate</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>QG_ActionHandler</name>
    <message>
        <source>escape</source>
        <comment>escape, go back from action steps</comment>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>QG_ActiveLayerName</name>
    <message>
        <source>Selection</source>
        <translation type="unfinished">Zaznaczenie</translation>
    </message>
    <message>
        <source>&lt;html&gt;&lt;head/&gt;&lt;body&gt;&lt;p&gt;&lt;br/&gt;&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Current Layer</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>&lt;!DOCTYPE HTML PUBLIC &quot;-//W3C//DTD HTML 4.0//EN&quot; &quot;http://www.w3.org/TR/REC-html40/strict.dtd&quot;&gt;
&lt;html&gt;&lt;head&gt;&lt;meta name=&quot;qrichtext&quot; content=&quot;1&quot; /&gt;&lt;style type=&quot;text/css&quot;&gt;
p, li { white-space: pre-wrap; }
&lt;/style&gt;&lt;/head&gt;&lt;body style=&quot; font-family:&apos;Helvetica&apos;; font-size:7pt; font-weight:400; font-style:normal;&quot;&gt;
&lt;p style=&quot; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;&quot;&gt;Name of Current Active Layer&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>QG_BlockDialog</name>
    <message>
        <source>Block Settings</source>
        <translation>Ustawienia bloku</translation>
    </message>
    <message>
        <source>Block Name:</source>
        <translation>Nazwa bloku:</translation>
    </message>
    <message>
        <source>Renaming Block</source>
        <translation>Zmiana nazwy bloku</translation>
    </message>
    <message>
        <source>Could not name block. A block named &quot;%1&quot; already exists.</source>
        <translation>Nie można nazwać bloku. Blok o nazwie &quot;%1&quot; już istnieje.</translation>
    </message>
</context>
<context>
    <name>QG_BlockWidget</name>
    <message>
        <source>Rename the active block</source>
        <translation>Zmień nazwę aktywnego bloku</translation>
    </message>
    <message>
        <source>Edit the active block
in a separate window</source>
        <translation>Edytuj aktywny blok 
w oddzielnym oknie</translation>
    </message>
    <message>
        <source>Insert the active block</source>
        <translation>Wstaw aktywny blok</translation>
    </message>
    <message>
        <source>Block Menu</source>
        <translation>Menu blok</translation>
    </message>
    <message>
        <source>&amp;Defreeze all Blocks</source>
        <translation>&amp;Odblokuj wszystkie bloki</translation>
    </message>
    <message>
        <source>&amp;Freeze all Blocks</source>
        <translation>&amp;Blokuj wszystkie bloki</translation>
    </message>
    <message>
        <source>&amp;Add Block</source>
        <translation>&amp;Dodaj blok</translation>
    </message>
    <message>
        <source>&amp;Remove Block</source>
        <translation>&amp;Usuń blok</translation>
    </message>
    <message>
        <source>&amp;Edit Block</source>
        <translation>&amp;Edytuj blok</translation>
    </message>
    <message>
        <source>&amp;Toggle Visibility</source>
        <translation>&amp;Zmień widoczność</translation>
    </message>
    <message>
        <source>Show all blocks</source>
        <translation>Pokaż wszystkie bloki</translation>
    </message>
    <message>
        <source>Hide all blocks</source>
        <translation>Ukryj wszystkie bloki</translation>
    </message>
    <message>
        <source>&amp;Rename Block</source>
        <translation>&amp;Zmień nazwę bloku</translation>
    </message>
    <message>
        <source>&amp;Insert Block</source>
        <translation>&amp;Wstaw blok</translation>
    </message>
    <message>
        <source>&amp;Create New Block</source>
        <translation>&amp;Stwórz Nowy blok</translation>
    </message>
    <message>
        <source>Create Block</source>
        <translation>Stwórz Blok</translation>
    </message>
    <message>
        <source>Add an empty block</source>
        <translation>Dodaj pusty blok</translation>
    </message>
    <message>
        <source>save the active block to a file</source>
        <translation>zapisz aktywny blok do pliku</translation>
    </message>
    <message>
        <source>Remove block</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Filter</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Looking for matching block names</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>QG_ColorBox</name>
    <message>
        <source>By Layer</source>
        <translation>Według warstwy</translation>
    </message>
    <message>
        <source>By Block</source>
        <translation>Według bloku</translation>
    </message>
    <message>
        <source>Red</source>
        <translation>Czerwony</translation>
    </message>
    <message>
        <source>Yellow</source>
        <translation>Żółty</translation>
    </message>
    <message>
        <source>Green</source>
        <translation>Zielony</translation>
    </message>
    <message>
        <source>Cyan</source>
        <translation>Cyjanowy</translation>
    </message>
    <message>
        <source>Blue</source>
        <translation>Niebieski</translation>
    </message>
    <message>
        <source>Magenta</source>
        <translation>Magenta</translation>
    </message>
    <message>
        <source>Black / White</source>
        <translation>Czarny / Biały</translation>
    </message>
    <message>
        <source>Gray</source>
        <translation>Szary</translation>
    </message>
    <message>
        <source>Light Gray</source>
        <translation>Jasnoszary</translation>
    </message>
    <message>
        <source>Unchanged</source>
        <translation>Niezmieniony</translation>
    </message>
    <message>
        <source>Dark Red</source>
        <translation>Ciemnoczerwony</translation>
    </message>
    <message>
        <source>Dark Yellow</source>
        <translation>Ciemnożółty</translation>
    </message>
    <message>
        <source>Dark Green</source>
        <translation>Ciemnozielony</translation>
    </message>
    <message>
        <source>Dark Cyan</source>
        <translation>Ciemny Cyan</translation>
    </message>
    <message>
        <source>Dark Blue</source>
        <translation>Ciemnoniebieski</translation>
    </message>
    <message>
        <source>Dark Magenta</source>
        <translation>Ciemna Magenta</translation>
    </message>
    <message>
        <source>Dark Gray</source>
        <translation>Ciemnoszary</translation>
    </message>
    <message>
        <source>Custom</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>/ColorBox</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Custom Picked</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>QG_CommandEdit</name>
    <message>
        <source>clear</source>
        <translation>wyczyść</translation>
    </message>
</context>
<context>
    <name>QG_CommandHistory</name>
    <message>
        <source>&amp;Copy</source>
        <translation type="unfinished">&amp;Kopiuj</translation>
    </message>
    <message>
        <source>Select &amp;All</source>
        <translation type="unfinished">Zaznacz &amp;wszystko</translation>
    </message>
    <message>
        <source>Clear</source>
        <translation type="unfinished">Wyczyść</translation>
    </message>
</context>
<context>
    <name>QG_CommandWidget</name>
    <message>
        <source>Command Line</source>
        <translation>Linia poleceń</translation>
    </message>
    <message>
        <source>Command:</source>
        <translation>Polecenie:</translation>
    </message>
    <message>
        <source>Unknown command: %1</source>
        <translation>Nieznane polecenie: %1</translation>
    </message>
    <message>
        <source>Command history and output</source>
        <translation>Historia poleceń</translation>
    </message>
    <message>
        <source>escape</source>
        <comment>escape, go back from action steps</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>...</source>
        <translation type="unfinished">...</translation>
    </message>
    <message>
        <source>Dock</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Float</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Command line</source>
        <translation type="unfinished">Linia poleceń</translation>
    </message>
    <message>
        <source>Cmd</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>QG_CoordinateWidget</name>
    <message>
        <source>Coordinates</source>
        <translation>Współrzędne</translation>
    </message>
</context>
<context>
    <name>QG_DimensionLabelEditor</name>
    <message>
        <source>Dimension Label Editor</source>
        <translation>Edytor etykiety wymiaru</translation>
    </message>
    <message>
        <source>Dimension Label:</source>
        <translation>Etykieta wymiarowania:</translation>
    </message>
    <message>
        <source>Label:</source>
        <translation>Etykieta:</translation>
    </message>
    <message>
        <source>Insert:</source>
        <translation>Wstaw:</translation>
    </message>
    <message>
        <source>° (Degree)</source>
        <translation>° (Stopień)</translation>
    </message>
    <message>
        <source>± (Plus / Minus)</source>
        <translation>± (Plus / Minus)</translation>
    </message>
    <message>
        <source>× (Times)</source>
        <translation>× (Razy)</translation>
    </message>
    <message>
        <source>÷ (Division)</source>
        <translation>÷ (Dzielenie)</translation>
    </message>
    <message>
        <source>⌀ (Diameter)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>π (Pi)</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>QG_DlgArc</name>
    <message>
        <source>Arc</source>
        <translation>Łuk</translation>
    </message>
    <message>
        <source>Layer:</source>
        <translation>Warstwa:</translation>
    </message>
    <message>
        <source>Geometry</source>
        <translation>Geometria</translation>
    </message>
    <message>
        <source>Radius:</source>
        <translation>Promień:</translation>
    </message>
    <message>
        <source>Center (y):</source>
        <translation>Środek (y):</translation>
    </message>
    <message>
        <source>Center (x):</source>
        <translation>Środek (x):</translation>
    </message>
    <message>
        <source>Start Angle:</source>
        <translation>Kąt początkowy:</translation>
    </message>
    <message>
        <source>End Angle:</source>
        <translation>Kąt końcowy:</translation>
    </message>
    <message>
        <source>Reversed</source>
        <translation>Odwrócony</translation>
    </message>
</context>
<context>
    <name>QG_DlgAttributes</name>
    <message>
        <source>Attributes</source>
        <translation>Atrybuty</translation>
    </message>
    <message>
        <source>Layer:</source>
        <translation>Warstwa:</translation>
    </message>
    <message>
        <source>Apply attributes also to all sub-entities of selected INSERT.
This recursively modifies all entities of the Block itself.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Apply attributes Block-deep</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>QG_DlgCircle</name>
    <message>
        <source>Circle</source>
        <translation>Okrąg</translation>
    </message>
    <message>
        <source>Layer:</source>
        <translation>Warstwa:</translation>
    </message>
    <message>
        <source>Geometry</source>
        <translation>Geometria</translation>
    </message>
    <message>
        <source>Radius:</source>
        <translation>Promień:</translation>
    </message>
    <message>
        <source>Center (y):</source>
        <translation>Środek (y):</translation>
    </message>
    <message>
        <source>Center (x):</source>
        <translation>Środek (x):</translation>
    </message>
</context>
<context>
    <name>QG_DlgDimLinear</name>
    <message>
        <source>Linear Dimension</source>
        <translation>Wymiar liniowy</translation>
    </message>
    <message>
        <source>Layer:</source>
        <translation>Warstwa:</translation>
    </message>
    <message>
        <source>Geometry</source>
        <translation>Geometria</translation>
    </message>
    <message>
        <source>Angle:</source>
        <translation>Kąt:</translation>
    </message>
</context>
<context>
    <name>QG_DlgDimension</name>
    <message>
        <source>Layer:</source>
        <translation>Warstwa:</translation>
    </message>
    <message>
        <source>Dimension</source>
        <translation>Wymiar</translation>
    </message>
</context>
<context>
    <name>QG_DlgEllipse</name>
    <message>
        <source>Ellipse</source>
        <translation>Elipsa</translation>
    </message>
    <message>
        <source>Layer:</source>
        <translation>Warstwa:</translation>
    </message>
    <message>
        <source>Geometry</source>
        <translation>Geometria</translation>
    </message>
    <message>
        <source>Center (y):</source>
        <translation>Środek (y):</translation>
    </message>
    <message>
        <source>Center (x):</source>
        <translation>Środek (x):</translation>
    </message>
    <message>
        <source>End Angle:</source>
        <translation>Kąt końcowy:</translation>
    </message>
    <message>
        <source>Start Angle:</source>
        <translation>Kąt początkowy:</translation>
    </message>
    <message>
        <source>Rotation:</source>
        <translation>Obracanie:</translation>
    </message>
    <message>
        <source>Minor:</source>
        <translation>Mniejsza:</translation>
    </message>
    <message>
        <source>Major:</source>
        <translation>Większa:</translation>
    </message>
    <message>
        <source>Reversed</source>
        <translation>Odwrócony</translation>
    </message>
</context>
<context>
    <name>QG_DlgHatch</name>
    <message>
        <source>Choose Hatch Attributes</source>
        <translation>Wybierz atrybuty kreskowania</translation>
    </message>
    <message>
        <source>Pattern</source>
        <translation>Wzór</translation>
    </message>
    <message>
        <source>Angle:</source>
        <translation>Kąt:</translation>
    </message>
    <message>
        <source>Scale:</source>
        <translation>Skala:</translation>
    </message>
    <message>
        <source>Solid Fill</source>
        <translation>Wypełnienie jednolite</translation>
    </message>
    <message>
        <source>Preview</source>
        <translation>Podgląd</translation>
    </message>
    <message>
        <source>Enable Preview</source>
        <translation>Włącz podgląd</translation>
    </message>
</context>
<context>
    <name>QG_DlgImage</name>
    <message>
        <source>Image</source>
        <translation>Obraz</translation>
    </message>
    <message>
        <source>Layer:</source>
        <translation>Warstwa:</translation>
    </message>
    <message>
        <source>Geometry</source>
        <translation>Geometria</translation>
    </message>
    <message>
        <source>Width:</source>
        <translation>Szerokość:</translation>
    </message>
    <message>
        <source>Height:</source>
        <translation>Wysokość:</translation>
    </message>
    <message>
        <source>insert (x):</source>
        <translation>wstaw (x):</translation>
    </message>
    <message>
        <source>Scale:</source>
        <translation>Skala:</translation>
    </message>
    <message>
        <source>Size (px):</source>
        <translation>Rozmiar (px):</translation>
    </message>
    <message>
        <source>path:</source>
        <translation>ścieżka:</translation>
    </message>
    <message>
        <source>insert (y):</source>
        <translation>wstaw (y):</translation>
    </message>
    <message>
        <source>Angle:</source>
        <translation>Kąt:</translation>
    </message>
    <message>
        <source>DPI</source>
        <translation>DPI</translation>
    </message>
    <message>
        <source>Select an image file</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>QG_DlgInitial</name>
    <message>
        <source>Welcome</source>
        <translation>Witaj</translation>
    </message>
    <message>
        <source>Default Unit:</source>
        <translation>Jednostka domyślna:</translation>
    </message>
    <message>
        <source>GUI Language:</source>
        <translation>Język interfejsu graficznego:</translation>
    </message>
    <message>
        <source>Command Language:</source>
        <translation>Język komend:</translation>
    </message>
    <message>
        <source>&lt;font size=&quot;+1&quot;&gt;&lt;b&gt;Welcome to LibreCAD&lt;/b&gt;
&lt;/font&gt;
&lt;br&gt;
Please choose the unit you want to use for new drawings and your preferred language.&lt;br&gt;
(You can changes these settings later.)</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>QG_DlgInsert</name>
    <message>
        <source>Insert</source>
        <translation>Wstaw</translation>
    </message>
    <message>
        <source>Layer:</source>
        <translation>Warstwa:</translation>
    </message>
    <message>
        <source>Geometry</source>
        <translation>Geometria</translation>
    </message>
    <message>
        <source>Insertion point (x):</source>
        <translation>Punkt wstawiania (x):</translation>
    </message>
    <message>
        <source>Insertion point (y):</source>
        <translation>Punkt wstawiania (y):</translation>
    </message>
    <message>
        <source>Angle:</source>
        <translation>Kąt:</translation>
    </message>
    <message>
        <source>Rows:</source>
        <translation>Wierszy:</translation>
    </message>
    <message>
        <source>Columns:</source>
        <translation>Kolumn:</translation>
    </message>
    <message>
        <source>Row Spacing:</source>
        <translation>Odstępy między wierszami:</translation>
    </message>
    <message>
        <source>Column Spacing:</source>
        <translation>Odstępy między kolumnami:</translation>
    </message>
    <message>
        <source>Scale X:</source>
        <translation>Skala X:</translation>
    </message>
    <message>
        <source>Scale Y:</source>
        <translation>Skala Y:</translation>
    </message>
</context>
<context>
    <name>QG_DlgLine</name>
    <message>
        <source>Line</source>
        <translation>Linia</translation>
    </message>
    <message>
        <source>Layer:</source>
        <translation>Warstwa:</translation>
    </message>
    <message>
        <source>Geometry</source>
        <translation>Geometria</translation>
    </message>
    <message>
        <source>End point (x):</source>
        <translation>Punkt końcowy (x):</translation>
    </message>
    <message>
        <source>End point (y):</source>
        <translation>Punkt końcowy (y):</translation>
    </message>
    <message>
        <source>Start point (y):</source>
        <translation>Punkt początkowy (y):</translation>
    </message>
    <message>
        <source>Start point (x):</source>
        <translation>Punkt początkowy (x):</translation>
    </message>
    <message>
        <source>ID: </source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>QG_DlgMText</name>
    <message>
        <source>MText</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Layer:</source>
        <translation>Warstwa:</translation>
    </message>
    <message>
        <source>&amp;Height:</source>
        <translation>&amp;Wysokość:</translation>
    </message>
    <message>
        <source>&amp;Default line spacing</source>
        <translation>&amp;Domyślny odstęp między liniami</translation>
    </message>
    <message>
        <source>Alt+D</source>
        <translation>Alt+D</translation>
    </message>
    <message>
        <source>Alignment</source>
        <translation>Wyrównanie</translation>
    </message>
    <message>
        <source>Top Right</source>
        <translation type="unfinished">Góra - prawo</translation>
    </message>
    <message>
        <source>Top Left</source>
        <translation type="unfinished">Góra - lewo</translation>
    </message>
    <message>
        <source>Middle Left</source>
        <translation type="unfinished">Środek - lewo</translation>
    </message>
    <message>
        <source>Middle Center</source>
        <translation type="unfinished">Środek - środek</translation>
    </message>
    <message>
        <source>Middle Right</source>
        <translation type="unfinished">Środek - prawo</translation>
    </message>
    <message>
        <source>Bottom Left</source>
        <translation type="unfinished">Dół - lewo</translation>
    </message>
    <message>
        <source>Bottom Right</source>
        <translation type="unfinished">Dół - prawo</translation>
    </message>
    <message>
        <source>Bottom Center</source>
        <translation type="unfinished">Dół - środek</translation>
    </message>
    <message>
        <source>Top Center</source>
        <translation type="unfinished">Góra - środek</translation>
    </message>
    <message>
        <source>Angle</source>
        <translation>Kąt</translation>
    </message>
    <message>
        <source>Text:</source>
        <translation>Tekst:</translation>
    </message>
    <message>
        <source>Clear Text</source>
        <translation>Wyczyść tekst</translation>
    </message>
    <message>
        <source>Load Text From File</source>
        <translation>Wczytaj tekst z pliku</translation>
    </message>
    <message>
        <source>Save Text To File</source>
        <translation>Zapisz tekst do pliku</translation>
    </message>
    <message>
        <source>Cut</source>
        <translation>Wytnij</translation>
    </message>
    <message>
        <source>Copy</source>
        <translation>Kopiuj</translation>
    </message>
    <message>
        <source>Paste</source>
        <translation>Wklej</translation>
    </message>
    <message>
        <source>Insert Symbol</source>
        <translation>Wstaw symbol</translation>
    </message>
    <message>
        <source>Degree (°)</source>
        <translation>Stopień (°)</translation>
    </message>
    <message>
        <source>Plus / Minus (±)</source>
        <translation>Plus / Minus (±)</translation>
    </message>
    <message>
        <source>At (@)</source>
        <translation>At (@)</translation>
    </message>
    <message>
        <source>Hash (#)</source>
        <translation type="unfinished">Hash (#)</translation>
    </message>
    <message>
        <source>Dollar ($)</source>
        <translation>Dolar ($)</translation>
    </message>
    <message>
        <source>Copyright (©)</source>
        <translation>Copyright (©)</translation>
    </message>
    <message>
        <source>Registered (®)</source>
        <translation>Zarejestrowany (®)</translation>
    </message>
    <message>
        <source>Paragraph (§)</source>
        <translation>Paragraf (§)</translation>
    </message>
    <message>
        <source>Pi (π)</source>
        <translation>Pi (π)</translation>
    </message>
    <message>
        <source>Pound (£)</source>
        <translation>Funt (£)</translation>
    </message>
    <message>
        <source>Yen (¥)</source>
        <translation>Jen (¥)</translation>
    </message>
    <message>
        <source>Times (×)</source>
        <translation>Razy (×)</translation>
    </message>
    <message>
        <source>Division (÷)</source>
        <translation>Dzielenie (÷)</translation>
    </message>
    <message>
        <source>Insert Unicode</source>
        <translation>Wstaw Unicode</translation>
    </message>
    <message>
        <source>Page:</source>
        <translation>Strona:</translation>
    </message>
    <message>
        <source>Char:</source>
        <translation>Znak:</translation>
    </message>
    <message>
        <source>[0000-007F] Basic Latin</source>
        <translation>[0000-007F] Basic Latin</translation>
    </message>
    <message>
        <source>[0080-00FF] Latin-1 Supplementary</source>
        <translation type="unfinished">[0080-00FF] Latin-1 Supplementary</translation>
    </message>
    <message>
        <source>[0100-017F] Latin Extended-A</source>
        <translation type="unfinished">[0100-017F] Latin Extended-A</translation>
    </message>
    <message>
        <source>[0180-024F] Latin Extended-B</source>
        <translation type="unfinished">[0180-024F] Latin Extended-B</translation>
    </message>
    <message>
        <source>[0250-02AF] IPA Extensions</source>
        <translation type="unfinished">[0250-02AF] IPA Extensions</translation>
    </message>
    <message>
        <source>[02B0-02FF] Spacing Modifier Letters</source>
        <translation>[02B0-02FF] Modyfikatory odstępu liter</translation>
    </message>
    <message>
        <source>[0300-036F] Combining Diacritical Marks</source>
        <translation type="unfinished">[0300-036F] Combining Diacritical Marks</translation>
    </message>
    <message>
        <source>[0370-03FF] Greek and Coptic</source>
        <translation type="unfinished">[0370-03FF] Greek and Coptic</translation>
    </message>
    <message>
        <source>[0400-04FF] Cyrillic</source>
        <translation type="unfinished">[0400-04FF] Cyrillic</translation>
    </message>
    <message>
        <source>[0500-052F] Cyrillic Supplementary</source>
        <translation type="unfinished">[0500-052F] Cyrillic Supplementary</translation>
    </message>
    <message>
        <source>[0530-058F] Armenian</source>
        <translation type="unfinished">[0530-058F] Armenian</translation>
    </message>
    <message>
        <source>[0590-05FF] Hebrew</source>
        <translation type="unfinished">[0590-05FF] Hebrew</translation>
    </message>
    <message>
        <source>[0600-06FF] Arabic</source>
        <translation type="unfinished">[0600-06FF] Arabic</translation>
    </message>
    <message>
        <source>[0700-074F] Syriac</source>
        <translation type="unfinished">[0700-074F] Syriac</translation>
    </message>
    <message>
        <source>[0780-07BF] Thaana</source>
        <translation type="unfinished">[0780-07BF] Thaana</translation>
    </message>
    <message>
        <source>[0900-097F] Devanagari</source>
        <translation type="unfinished">[0900-097F] Devanagari</translation>
    </message>
    <message>
        <source>[0980-09FF] Bengali</source>
        <translation type="unfinished">[0980-09FF] Bengali</translation>
    </message>
    <message>
        <source>[0A00-0A7F] Gurmukhi</source>
        <translation type="unfinished">[0A00-0A7F] Gurmukhi</translation>
    </message>
    <message>
        <source>[0A80-0AFF] Gujarati</source>
        <translation type="unfinished">[0A80-0AFF] Gujarati</translation>
    </message>
    <message>
        <source>[0B00-0B7F] Oriya</source>
        <translation type="unfinished">[0B00-0B7F] Oriya</translation>
    </message>
    <message>
        <source>[0B80-0BFF] Tamil</source>
        <translation type="unfinished">[0B80-0BFF] Tamil</translation>
    </message>
    <message>
        <source>[0C00-0C7F] Telugu</source>
        <translation type="unfinished">[0C00-0C7F] Telugu</translation>
    </message>
    <message>
        <source>[0C80-0CFF] Kannada</source>
        <translation type="unfinished">[0C80-0CFF] Kannada</translation>
    </message>
    <message>
        <source>[0D00-0D7F] Malayalam</source>
        <translation type="unfinished">[0D00-0D7F] Malayalam</translation>
    </message>
    <message>
        <source>[0D80-0DFF] Sinhala</source>
        <translation type="unfinished">[0D80-0DFF] Sinhala</translation>
    </message>
    <message>
        <source>[0E00-0E7F] Thai</source>
        <translation type="unfinished">[0E00-0E7F] Thai</translation>
    </message>
    <message>
        <source>[0E80-0EFF] Lao</source>
        <translation type="unfinished">[0E80-0EFF] Lao</translation>
    </message>
    <message>
        <source>[0F00-0FFF] Tibetan</source>
        <translation type="unfinished">[0F00-0FFF] Tibetan</translation>
    </message>
    <message>
        <source>[1000-109F] Myanmar</source>
        <translation type="unfinished">[1000-109F] Myanmar</translation>
    </message>
    <message>
        <source>[10A0-10FF] Georgian</source>
        <translation type="unfinished">[10A0-10FF] Georgian</translation>
    </message>
    <message>
        <source>[1100-11FF] Hangul Jamo</source>
        <translation type="unfinished">[1100-11FF] Hangul Jamo</translation>
    </message>
    <message>
        <source>[1200-137F] Ethiopic</source>
        <translation type="unfinished">[1200-137F] Ethiopic</translation>
    </message>
    <message>
        <source>[13A0-13FF] Cherokee</source>
        <translation type="unfinished">[13A0-13FF] Cherokee</translation>
    </message>
    <message>
        <source>[1400-167F] Unified Canadian Aboriginal Syllabic</source>
        <translation type="unfinished">[1400-167F] Unified Canadian Aboriginal Syllabic</translation>
    </message>
    <message>
        <source>[1680-169F] Ogham</source>
        <translation type="unfinished">[1680-169F] Ogham</translation>
    </message>
    <message>
        <source>[16A0-16FF] Runic</source>
        <translation type="unfinished">[16A0-16FF] Runic</translation>
    </message>
    <message>
        <source>[1700-171F] Tagalog</source>
        <translation type="unfinished">[1700-171F] Tagalog</translation>
    </message>
    <message>
        <source>[1720-173F] Hanunoo</source>
        <translation type="unfinished">[1720-173F] Hanunoo</translation>
    </message>
    <message>
        <source>[1740-175F] Buhid</source>
        <translation type="unfinished">[1740-175F] Buhid</translation>
    </message>
    <message>
        <source>[1760-177F] Tagbanwa</source>
        <translation type="unfinished">[1760-177F] Tagbanwa</translation>
    </message>
    <message>
        <source>[1780-17FF] Khmer</source>
        <translation type="unfinished">[1780-17FF] Khmer</translation>
    </message>
    <message>
        <source>[1800-18AF] Mongolian</source>
        <translation type="unfinished">[1800-18AF] Mongolian</translation>
    </message>
    <message>
        <source>[1E00-1EFF] Latin Extended Additional</source>
        <translation type="unfinished">[1E00-1EFF] Latin Extended Additional</translation>
    </message>
    <message>
        <source>[1F00-1FFF] Greek Extended</source>
        <translation type="unfinished">[1F00-1FFF] Greek Extended</translation>
    </message>
    <message>
        <source>[2000-206F] General Punctuation</source>
        <translation type="unfinished">[2000-206F] General Punctuation</translation>
    </message>
    <message>
        <source>[2070-209F] Superscripts and Subscripts</source>
        <translation type="unfinished">[2070-209F] Superscripts and Subscripts</translation>
    </message>
    <message>
        <source>[20A0-20CF] Currency Symbols</source>
        <translation type="unfinished">[20A0-20CF] Currency Symbols</translation>
    </message>
    <message>
        <source>[20D0-20FF] Combining Marks for Symbols</source>
        <translation type="unfinished">[20D0-20FF] Combining Marks for Symbols</translation>
    </message>
    <message>
        <source>[2100-214F] Letterlike Symbols</source>
        <translation type="unfinished">[2100-214F] Letterlike Symbols</translation>
    </message>
    <message>
        <source>[2150-218F] Number Forms</source>
        <translation type="unfinished">[2150-218F] Liczba Form</translation>
    </message>
    <message>
        <source>[2190-21FF] Arrows</source>
        <translation>[2190-21FF] Strzałki</translation>
    </message>
    <message>
        <source>[2200-22FF] Mathematical Operators</source>
        <translation>[2200-22FF] Operatory matematyczne</translation>
    </message>
    <message>
        <source>[2300-23FF] Miscellaneous Technical</source>
        <translation type="unfinished">[2300-23FF] Miscellaneous Technical</translation>
    </message>
    <message>
        <source>[2400-243F] Control Pictures</source>
        <translation type="unfinished">[2400-243F] Control Pictures</translation>
    </message>
    <message>
        <source>[2440-245F] Optical Character Recognition</source>
        <translation type="unfinished">[2440-245F] Optical Character Recognition</translation>
    </message>
    <message>
        <source>[2460-24FF] Enclosed Alphanumerics</source>
        <translation type="unfinished">[2460-24FF] Enclosed Alphanumerics</translation>
    </message>
    <message>
        <source>[2500-257F] Box Drawing</source>
        <translation type="unfinished">[2500-257F] Box Drawing</translation>
    </message>
    <message>
        <source>[2580-259F] Block Elements</source>
        <translation>[2580-259F] Elementy Blokowe</translation>
    </message>
    <message>
        <source>[25A0-25FF] Geometric Shapes</source>
        <translation>[25A0-25FF] Figury geometryczne</translation>
    </message>
    <message>
        <source>[2600-26FF] Miscellaneous Symbols</source>
        <translation>[2600-26FF] Różnorodne symbole</translation>
    </message>
    <message>
        <source>[2700-27BF] Dingbats</source>
        <translation type="unfinished">[2700-27BF] Dingbats</translation>
    </message>
    <message>
        <source>[27C0-27EF] Miscellaneous Mathematical Symbols-A</source>
        <translation type="unfinished">[27C0-27EF] Miscellaneous Mathematical Symbols-A</translation>
    </message>
    <message>
        <source>[27F0-27FF] Supplemental Arrows-A</source>
        <translation type="unfinished">[27F0-27FF] Supplemental Arrows-A</translation>
    </message>
    <message>
        <source>[2800-28FF] Braille Patterns</source>
        <translation type="unfinished">[2800-28FF] Braille Patterns</translation>
    </message>
    <message>
        <source>[2900-297F] Supplemental Arrows-B</source>
        <translation type="unfinished">[2900-297F] Supplemental Arrows-B</translation>
    </message>
    <message>
        <source>[2980-29FF] Miscellaneous Mathematical Symbols-B</source>
        <translation type="unfinished">[2980-29FF] Miscellaneous Mathematical Symbols-B</translation>
    </message>
    <message>
        <source>[2A00-2AFF] Supplemental Mathematical Operators</source>
        <translation type="unfinished">[2A00-2AFF] Supplemental Mathematical Operators</translation>
    </message>
    <message>
        <source>[2E80-2EFF] CJK Radicals Supplement</source>
        <translation type="unfinished">[2E80-2EFF] CJK Radicals Supplement</translation>
    </message>
    <message>
        <source>[2F00-2FDF] Kangxi Radicals</source>
        <translation type="unfinished">[2F00-2FDF] Kangxi Radicals</translation>
    </message>
    <message>
        <source>[2FF0-2FFF] Ideographic Description Characters</source>
        <translation type="unfinished">[2FF0-2FFF] Ideographic Description Characters</translation>
    </message>
    <message>
        <source>[3000-303F] CJK Symbols and Punctuation</source>
        <translation type="unfinished">[3000-303F] CJK Symbols and Punctuation</translation>
    </message>
    <message>
        <source>[3040-309F] Hiragana</source>
        <translation type="unfinished">[3040-309F] Hiragana</translation>
    </message>
    <message>
        <source>[30A0-30FF] Katakana</source>
        <translation type="unfinished">[30A0-30FF] Katakana</translation>
    </message>
    <message>
        <source>[3100-312F] Bopomofo</source>
        <translation type="unfinished">[3100-312F] Bopomofo</translation>
    </message>
    <message>
        <source>[3130-318F] Hangul Compatibility Jamo</source>
        <translation type="unfinished">[3130-318F] Hangul Compatibility Jamo</translation>
    </message>
    <message>
        <source>[3190-319F] Kanbun</source>
        <translation type="unfinished">[3190-319F] Kanbun</translation>
    </message>
    <message>
        <source>[31A0-31BF] Bopomofo Extended</source>
        <translation type="unfinished">[31A0-31BF] Bopomofo Extended</translation>
    </message>
    <message>
        <source>[3200-32FF] Enclosed CJK Letters and Months</source>
        <translation type="unfinished">[3200-32FF] Enclosed CJK Letters and Months</translation>
    </message>
    <message>
        <source>[3300-33FF] CJK Compatibility</source>
        <translation type="unfinished">[3300-33FF] CJK Compatibility</translation>
    </message>
    <message>
        <source>[3400-4DBF] CJK Unified Ideographs Extension A</source>
        <translation type="unfinished">[3400-4DBF] CJK Unified Ideographs Extension A</translation>
    </message>
    <message>
        <source>[4E00-9FAF] CJK Unified Ideographs</source>
        <translation type="unfinished">[4E00-9FAF] CJK Unified Ideographs</translation>
    </message>
    <message>
        <source>[A000-A48F] Yi Syllables</source>
        <translation type="unfinished">[A000-A48F] Yi Syllables</translation>
    </message>
    <message>
        <source>[A490-A4CF] Yi Radicals</source>
        <translation type="unfinished">[A490-A4CF] Yi Radicals</translation>
    </message>
    <message>
        <source>[AC00-D7AF] Hangul Syllables</source>
        <translation type="unfinished">[AC00-D7AF] Hangul Syllables</translation>
    </message>
    <message>
        <source>[D800-DBFF] High Surrogates</source>
        <translation type="unfinished">[D800-DBFF] High Surrogates</translation>
    </message>
    <message>
        <source>[DC00-DFFF] Low Surrogate Area</source>
        <translation type="unfinished">[DC00-DFFF] Low Surrogate Area</translation>
    </message>
    <message>
        <source>[E000-F8FF] Private Use Area</source>
        <translation type="unfinished">[E000-F8FF] Private Use Area</translation>
    </message>
    <message>
        <source>[F900-FAFF] CJK Compatibility Ideographs</source>
        <translation type="unfinished">[F900-FAFF] CJK Compatibility Ideographs</translation>
    </message>
    <message>
        <source>[FB00-FB4F] Alphabetic Presentation Forms</source>
        <translation type="unfinished">[FB00-FB4F] Alphabetic Presentation Forms</translation>
    </message>
    <message>
        <source>[FB50-FDFF] Arabic Presentation Forms-A</source>
        <translation type="unfinished">[FB50-FDFF] Arabic Presentation Forms-A</translation>
    </message>
    <message>
        <source>[FE00-FE0F] Variation Selectors</source>
        <translation type="unfinished">[FE00-FE0F] Variation Selectors</translation>
    </message>
    <message>
        <source>[FE20-FE2F] Combining Half Marks</source>
        <translation type="unfinished">[FE20-FE2F] Combining Half Marks</translation>
    </message>
    <message>
        <source>[FE30-FE4F] CJK Compatibility Forms</source>
        <translation type="unfinished">[FE30-FE4F] CJK Compatibility Forms</translation>
    </message>
    <message>
        <source>[FE50-FE6F] Small Form Variants</source>
        <translation type="unfinished">[FE50-FE6F] Small Form Variants</translation>
    </message>
    <message>
        <source>[FE70-FEFF] Arabic Presentation Forms-B</source>
        <translation type="unfinished">[FE70-FEFF] Arabic Presentation Forms-B</translation>
    </message>
    <message>
        <source>[FF00-FFEF] Halfwidth and Fullwidth Forms</source>
        <translation type="unfinished">[FF00-FFEF] Halfwidth and Fullwidth Forms</translation>
    </message>
    <message>
        <source>[FFF0-FFFF] Specials</source>
        <translation type="unfinished">[FFF0-FFFF] Specials</translation>
    </message>
    <message>
        <source>[10300-1032F] Old Italic</source>
        <translation type="unfinished">[10300-1032F] Old Italic</translation>
    </message>
    <message>
        <source>[10330-1034F] Gothic</source>
        <translation type="unfinished">[10330-1034F] Gothic</translation>
    </message>
    <message>
        <source>[10400-1044F] Deseret</source>
        <translation type="unfinished">[10400-1044F] Deseret</translation>
    </message>
    <message>
        <source>[1D000-1D0FF] Byzantine Musical Symbols</source>
        <translation type="unfinished">[1D000-1D0FF] Byzantine Musical Symbols</translation>
    </message>
    <message>
        <source>[1D100-1D1FF] Musical Symbols</source>
        <translation type="unfinished">[1D100-1D1FF] Musical Symbols</translation>
    </message>
    <message>
        <source>[1D400-1D7FF] Mathematical Alphanumeric Symbols</source>
        <translation type="unfinished">[1D400-1D7FF] Mathematical Alphanumeric Symbols</translation>
    </message>
    <message>
        <source>[20000-2A6DF] CJK Unified Ideographs Extension B</source>
        <translation type="unfinished">[20000-2A6DF] CJK Unified Ideographs Extension B</translation>
    </message>
    <message>
        <source>[2F800-2FA1F] CJK Compatibility Ideographs Supplement</source>
        <translation type="unfinished">[2F800-2FA1F] CJK Compatibility Ideographs Supplement</translation>
    </message>
    <message>
        <source>[E0000-E007F] Tags</source>
        <translation type="unfinished">[E0000-E007F] Tags</translation>
    </message>
    <message>
        <source>[F0000-FFFFD] Supplementary Private Use Area-A</source>
        <translation type="unfinished">[F0000-FFFFD] Supplementary Private Use Area-A</translation>
    </message>
    <message>
        <source>[100000-10FFFD] Supplementary Private Use Area-B</source>
        <translation type="unfinished">[100000-10FFFD] Supplementary Private Use Area-B</translation>
    </message>
    <message>
        <source>Diameter (⌀)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>&amp;Line spacing:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Font Settings</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Font:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Text Direction</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Left to right</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Right to left</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>QG_DlgMirror</name>
    <message>
        <source>Mirroring Options</source>
        <translation>Opcje odbić</translation>
    </message>
    <message>
        <source>Number of copies</source>
        <translation>Liczba kopii</translation>
    </message>
    <message>
        <source>&amp;Delete Original</source>
        <translation>&amp;Usuń oryginał</translation>
    </message>
    <message>
        <source>&amp;Keep Original</source>
        <translation>&amp;Zachowaj oryginał</translation>
    </message>
    <message>
        <source>Use current &amp;attributes</source>
        <translation>Użyj bieżących &amp;atrybutów</translation>
    </message>
    <message>
        <source>Use current &amp;layer</source>
        <translation>Użyj bieżącej &amp;warstwy</translation>
    </message>
    <message>
        <source>...</source>
        <translation>...</translation>
    </message>
</context>
<context>
    <name>QG_DlgMove</name>
    <message>
        <source>Number of copies</source>
        <translation>Liczba kopii</translation>
    </message>
    <message>
        <source>&amp;Delete Original</source>
        <translation>&amp;Usuń oryginał</translation>
    </message>
    <message>
        <source>&amp;Keep Original</source>
        <translation>&amp;Zachowaj oryginał</translation>
    </message>
    <message>
        <source>&amp;Multiple Copies</source>
        <translation>Kopie &amp;wielokrotne</translation>
    </message>
    <message>
        <source>Use current &amp;attributes</source>
        <translation>Użyj bieżąch &amp;atrybutów</translation>
    </message>
    <message>
        <source>Use current &amp;layer</source>
        <translation>Użyj bieżącej &amp;warstwy</translation>
    </message>
    <message>
        <source>...</source>
        <translation>...</translation>
    </message>
    <message>
        <source>Move/Copy Options</source>
        <translation>Opcje przenieś/kopiuj</translation>
    </message>
    <message>
        <source>Number of copies. Maximum 100</source>
        <translation>Liczba kopi. Maksymalnie 100</translation>
    </message>
</context>
<context>
    <name>QG_DlgMoveRotate</name>
    <message>
        <source>Move/Rotate Options</source>
        <translation>Opcje przesuwania/obrotów</translation>
    </message>
    <message>
        <source>Number of copies</source>
        <translation>Liczba kopii</translation>
    </message>
    <message>
        <source>&amp;Angle (a):</source>
        <translation>&amp;Kąt (a):</translation>
    </message>
    <message>
        <source>Use current &amp;attributes</source>
        <translation>Użyj bieżących &amp;atrybutów</translation>
    </message>
    <message>
        <source>Use current &amp;layer</source>
        <translation>Użyj bieżącej &amp;warstwy</translation>
    </message>
    <message>
        <source>&amp;Delete Original</source>
        <translation>&amp;Usuń oryginał</translation>
    </message>
    <message>
        <source>&amp;Keep Original</source>
        <translation>&amp;Zachowaj oryginał</translation>
    </message>
    <message>
        <source>&amp;Multiple Copies</source>
        <translation>Kopie &amp;wielokrotne</translation>
    </message>
    <message>
        <source>...</source>
        <translation>...</translation>
    </message>
    <message>
        <source>Ctrl+S</source>
        <translation>Ctrl+S</translation>
    </message>
</context>
<context>
    <name>QG_DlgOptionsDrawing</name>
    <message>
        <source>Main Unit</source>
        <translation>Główna jednostka</translation>
    </message>
    <message>
        <source>Length</source>
        <translation>Długość</translation>
    </message>
    <message>
        <source>Decimal</source>
        <translation>Dziesiętny</translation>
    </message>
    <message>
        <source>Scientific</source>
        <translation>Naukowy</translation>
    </message>
    <message>
        <source>Engineering</source>
        <translation>Inżynierski</translation>
    </message>
    <message>
        <source>Architectural</source>
        <translation>Architektoniczny</translation>
    </message>
    <message>
        <source>Fractional</source>
        <translation>Ułamkowy</translation>
    </message>
    <message>
        <source>Angle</source>
        <translation>Kąt</translation>
    </message>
    <message>
        <source>Decimal Degrees</source>
        <translation>Stopnie dziesiętne</translation>
    </message>
    <message>
        <source>Radians</source>
        <translation>Radiany</translation>
    </message>
    <message>
        <source>Preview</source>
        <translation>Podgląd</translation>
    </message>
    <message>
        <source>linear</source>
        <translation>liniowy</translation>
    </message>
    <message>
        <source>angular</source>
        <translation>kątowy</translation>
    </message>
    <message>
        <source>Text Height:</source>
        <translation>Wysokość tekstu:</translation>
    </message>
    <message>
        <source>units</source>
        <translation>jednostki</translation>
    </message>
    <message>
        <source>Deg/min/sec</source>
        <translation>Stopnie/minuty/sekundy</translation>
    </message>
    <message>
        <source>Gradians</source>
        <translation>Gradusy</translation>
    </message>
    <message>
        <source>Surveyor&apos;s units</source>
        <translation>Jednostki geometryczne</translation>
    </message>
    <message>
        <source>Options</source>
        <translation>Opcje</translation>
    </message>
    <message>
        <source>For the length formats &apos;Engineering&apos; and &apos;Architectural&apos;, the unit must be set to Inch.</source>
        <translation>Dla formatu długości &apos;Inżynierski&apos; i &apos;Architektoniczny&apos;, jednostka musi być ustawiona na cale.</translation>
    </message>
    <message>
        <source>Arrow size:</source>
        <translation>Rozmiar strzałki:</translation>
    </message>
    <message>
        <source>Dimension line gap:</source>
        <translation>Przerwa linii wymiarowej:</translation>
    </message>
    <message>
        <source>Drawing Preferences</source>
        <translation>Preferencje rysowania</translation>
    </message>
    <message>
        <source>&amp;Paper</source>
        <translation>&amp;Papier</translation>
    </message>
    <message>
        <source>&amp;Landscape</source>
        <translation>&amp;Poziomo</translation>
    </message>
    <message>
        <source>P&amp;ortrait</source>
        <translation>&amp;Pionowo</translation>
    </message>
    <message>
        <source>&amp;Units</source>
        <translation>&amp;Jednostki</translation>
    </message>
    <message>
        <source>&amp;Main drawing unit:</source>
        <translation>&amp;Główna jednostka rysowania:</translation>
    </message>
    <message>
        <source>&amp;Format:</source>
        <translation>&amp;Format:</translation>
    </message>
    <message>
        <source>P&amp;recision:</source>
        <translation>&amp;Dokładność:</translation>
    </message>
    <message>
        <source>F&amp;ormat:</source>
        <translation>F&amp;ormat:</translation>
    </message>
    <message>
        <source>Pre&amp;cision:</source>
        <translation>&amp;Dokładność:</translation>
    </message>
    <message>
        <source>&amp;Dimensions</source>
        <translation>&amp;Wymiary</translation>
    </message>
    <message>
        <source>&amp;Grid</source>
        <translation>&amp;Siatka</translation>
    </message>
    <message>
        <source>Grid Settings</source>
        <translation>Ustawienia siatki</translation>
    </message>
    <message>
        <source>Show Grid</source>
        <translation>Pokaż siatkę</translation>
    </message>
    <message>
        <source>X Spacing:</source>
        <translation>Odstępy w poziomie:</translation>
    </message>
    <message>
        <source>Y Spacing:</source>
        <translation>Odstępy w pionie:</translation>
    </message>
    <message>
        <source>auto</source>
        <translation>auto</translation>
    </message>
    <message>
        <source>Number of line segments per spline patch:</source>
        <translation>Liczba odcinków dla każdego elementu krzywej składanej:</translation>
    </message>
    <message>
        <source>Crosshair</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Left crosshair with isometric grid</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Left</source>
        <translation>Lewy</translation>
    </message>
    <message>
        <source>Top crosshair with isometric grid</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Top</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Right crosshair with isometric grid</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Right</source>
        <translation>Prawy</translation>
    </message>
    <message>
        <source>Use orthogonal grid</source>
        <translation>Użyj siatki ortogonalnej</translation>
    </message>
    <message>
        <source>Orthogonal Grid</source>
        <translation>Siatka ortogonalna</translation>
    </message>
    <message>
        <source>Use isometric grid</source>
        <translation>Użyj siatki izometrycznej</translation>
    </message>
    <message>
        <source>Isometric Grid</source>
        <translation>Siatka izometryczna</translation>
    </message>
    <message>
        <source>Tick size:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>&lt;html&gt;&lt;head/&gt;&lt;body&gt;&lt;p&gt;Dimension Tick size. Set it to 0 will disable the dimension tick. Dimension arrow won&apos;t be drawn when dimension tick is enabled.&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Horizontal</source>
        <translation type="unfinished">Poziomy</translation>
    </message>
    <message>
        <source>General Scale:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>&lt;html&gt;&lt;head/&gt;&lt;body&gt;&lt;p&gt;Scale to multiply all dimension values.&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>&lt;html&gt;&lt;head/&gt;&lt;body&gt;&lt;p&gt;Scale to multiply all dimension geometries.&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Text style:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>&apos;.&apos; (Period)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>&apos;,&apos; (Comma)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Decimal separator:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Linear units:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Color:</source>
        <translation type="unfinished">Kolor:</translation>
    </message>
    <message>
        <source>Length Factor:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Angular units:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Linear zeros:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Format units</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>&lt;html&gt;&lt;head/&gt;&lt;body&gt;&lt;p&gt;Distance gap around text&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Text size &amp; position</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Length to enlarge over dimension line</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>&lt;html&gt;&lt;head/&gt;&lt;body&gt;&lt;p&gt;Dimension arrow size. &lt;a name=&quot;result_box&quot;/&gt;without effect when tick size &lt;a name=&quot;result_box&quot;/&gt;is other than 0&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Width:</source>
        <translation type="unfinished">Szerokość:</translation>
    </message>
    <message>
        <source>Dimension lines, arrows &amp; ticks</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Angular zeros:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Angular precision:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Enlarge:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Offset:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Linear precision:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>&lt;html&gt;&lt;head/&gt;&lt;body&gt;&lt;p&gt;Text alignment &lt;a name=&quot;result_box&quot;/&gt;relative to the dimension line.&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Aligned</source>
        <translation type="unfinished">Wyrównany</translation>
    </message>
    <message>
        <source>&lt;html&gt;&lt;head/&gt;&lt;body&gt;&lt;p&gt;Offset from origin point.&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Text alignment:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Extension lines</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Fixed length:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Format</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>&amp;Height:</source>
        <translation type="unfinished">&amp;Wysokość:</translation>
    </message>
    <message>
        <source>&amp;Width:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Orientation</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Margins</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Bottom</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Number of pages</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Horizontally:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Vertically:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>fixed extension line length</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>&amp;Splines</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>&amp;Points</source>
        <translation type="unfinished">&amp;Punkty</translation>
    </message>
    <message>
        <source>Point Style</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>...</source>
        <translation type="unfinished">...</translation>
    </message>
    <message>
        <source>Point Size</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Dwg Units</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Size relative to screen</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Size in drawing units</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>(0 =&gt; 5% relative to screen size)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Architectural (metric)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>For the length format &apos;Architectural (metric)&apos;, the unit must be set to Meter.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Screen %</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>QG_DlgOptionsGeneral</name>
    <message>
        <source>Preferences</source>
        <translation>Preferencje</translation>
    </message>
    <message>
        <source>Translations:</source>
        <translation>Tłumaczenia:</translation>
    </message>
    <message>
        <source>Hatch Patterns:</source>
        <translation>Wzory kreskowania:</translation>
    </message>
    <message>
        <source>Fonts:</source>
        <translation>Czcionki:</translation>
    </message>
    <message>
        <source>Part Libraries:</source>
        <translation>Biblioteki części:</translation>
    </message>
    <message>
        <source>Language</source>
        <translation>Język</translation>
    </message>
    <message>
        <source>Graphic View</source>
        <translation>Widok graficzny</translation>
    </message>
    <message>
        <source>Application Preferences</source>
        <translation>Preferencje aplikacji</translation>
    </message>
    <message>
        <source>Defaults for new drawings</source>
        <translation>Domyślne dla nowych rysunków</translation>
    </message>
    <message>
        <source>&amp;Appearance</source>
        <translation>&amp;Wygląd</translation>
    </message>
    <message>
        <source>&amp;GUI Language:</source>
        <translation>Język &amp;interfejsu graficznego:</translation>
    </message>
    <message>
        <source>&amp;Command Language:</source>
        <translation>Język &amp;komend:</translation>
    </message>
    <message>
        <source>&amp;Paths</source>
        <translation>Ści&amp;eżki</translation>
    </message>
    <message>
        <source>&amp;Defaults</source>
        <translation>&amp;Domyślne</translation>
    </message>
    <message>
        <source>&amp;Unit:</source>
        <translation>&amp;Jednostka:</translation>
    </message>
    <message>
        <source>Backgr&amp;ound:</source>
        <translation>&amp;Tło:</translation>
    </message>
    <message>
        <source>G&amp;rid Color:</source>
        <translation>Kolor &amp;siatki:</translation>
    </message>
    <message>
        <source>&amp;Meta Grid Color:</source>
        <translation>Kolor &amp;meta-siatki:</translation>
    </message>
    <message>
        <source>S&amp;elected Color:</source>
        <translation>W&amp;ybrany kolor:</translation>
    </message>
    <message>
        <source>&amp;Highlighted Color:</source>
        <translation>P&amp;odświetlony kolor:</translation>
    </message>
    <message>
        <source>A&amp;utomatically scale grid</source>
        <translation>A&amp;utomatyczne skalowanie siatki</translation>
    </message>
    <message>
        <source>Please restart the application to apply all changes.</source>
        <translation>Proszę ponownie uruchomić aplikację, aby zastosować zmiany.</translation>
    </message>
    <message>
        <source>Alt+S</source>
        <translation>Alt+S</translation>
    </message>
    <message>
        <source>Alt+U</source>
        <translation>Alt+U</translation>
    </message>
    <message>
        <source>Program Defaults</source>
        <translation>Ustawienia domyślne</translation>
    </message>
    <message>
        <source>Drawing unit.</source>
        <translation>Jednostka rysunku.</translation>
    </message>
    <message>
        <source>Time between automatic saving of the document in minutes.</source>
        <translation>Czas pomiędzy autozapisem dokumentu w minutach.</translation>
    </message>
    <message>
        <source>When set, LibreCAD will automatically generate a backup of your current drawing.</source>
        <translation>Po włączeniu LibreCAD będzie automatycznie tworzył kopie zapasowe rysunku.</translation>
    </message>
    <message>
        <source>Auto backup</source>
        <translation>Kopia zapasowa</translation>
    </message>
    <message>
        <source>Template:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>St&amp;art Handle Color:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>&amp;Handle Color:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>&amp;End Handle Color:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Graphic Colors</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Snap indicator:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Anti-aliasing</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Modify layer of selected entities, at  layer activation</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Clear Settings</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>restores program geometry/layout to original state</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Layout</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>restores the program to its original state</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>All</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Scrollbars</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Snap indicator lines</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Snap indicator shape</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Hide cursor when snapping</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Start in tab mode</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Startup</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Display loading screen</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Start with main window maximized</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Enable CAD dockwidgets</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Enable CAD toolbars</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>#1E90FF</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Clear settings</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>This will also include custom menus and toolbars. Continue?</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>&lt;html&gt;&lt;head/&gt;&lt;body&gt;&lt;p&gt;When enabled, activating a layer would modify all selected entities to that new layer. To change layer of multiple entities: first select needed entities; activate a layer in the layer widget. This makes all selected entities modified to belong to the new layer.&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Variable File:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Minimal Grid Spacing (p&amp;x):</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>N&amp;umber of preview entities:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Don&apos;t use native OS file open dialog</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Auto-panning</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Hide the relative-&amp;zero marker</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Alt+Z</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Visualize the entity under the cursor</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Mouse-over effects</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>&amp;Relative-Zero Marker Color:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Auto save time (minutes):</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Inverts scrolling direction when using mouse wheel with Shift key.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Invert horizontal scrolling direction</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Inverts scrolling direction when using mouse wheel with Ctrl key.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Invert vertical scrolling direction</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Inverts zoom direction when using mouse wheel.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Invert zoom direction</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Keyboard Settings</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Evaluate commands when SPACE BAR is pressed</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Toggle free snap mode when the SPACE BAR is pressed and the command window is empty</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Toggle free snap mode when SPACE BAR is pressed</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>CAD Preferences</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Automatically zoom drawing when opening</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>QG_DlgOptionsMakerCam</name>
    <message>
        <source>Layers</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Export invisible layers</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Export visible construction layers</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Blocks</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Convert blocks to safe inline SVG content</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Ellipses / Ellipse arcs</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Approximate ellipses and ellipse arcs with cubic béziers</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Export as CAM/plain SVG</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Default width of elements, mm</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Images</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Raster Image export</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Dash/Dot Lines</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Length of the pattern, mm</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Bake dash/dot lines to SVG path</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>MakerCAM as of November 2014 does not hide SVG content 
that has been set invisibe (&quot;display: none&quot; or &quot;visibility: hidden&quot;).</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>MakerCAM as of November 2014 cannot correctly deal with blocks,
because it does not take into account the reference point in the &lt;use&gt;.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>MakerCAM as of March 2015 cannot display ellipses and ellipse arcs correctly, 
when they are created using the &lt;ellipse&gt; tag  with a rotation in 
the &lt;transform&gt; attribute or as &lt;path&gt; using elliptic arc segments.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Exported images can be useful in SVG editors (Inkscape, etc), 
but avoided in some CAM&apos;s.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Many CAM&apos;s(MakerCAM, EleskCAM, LaserWeb) ignore dashed/doted line style, 
which can be useful in lasercut of plywood or for papercraft. </source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Default width of elements can affect some CAM&apos;s/SVG Editors, 
but ignored by other</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Length of line pattern related to zoom, 
so default step value required for baking</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>QG_DlgPoint</name>
    <message>
        <source>Point</source>
        <translation>Punkt</translation>
    </message>
    <message>
        <source>Layer:</source>
        <translation>Warstwa:</translation>
    </message>
    <message>
        <source>Geometry</source>
        <translation>Geometria</translation>
    </message>
    <message>
        <source>Position (y):</source>
        <translation>Pozycja (y):</translation>
    </message>
    <message>
        <source>Position (x):</source>
        <translation>Pozycja (x):</translation>
    </message>
</context>
<context>
    <name>QG_DlgPolyline</name>
    <message>
        <source>Polyline</source>
        <translation>Linia łamana</translation>
    </message>
    <message>
        <source>Layer:</source>
        <translation>Warstwa:</translation>
    </message>
    <message>
        <source>Geometry</source>
        <translation>Geometria</translation>
    </message>
    <message>
        <source>Closed</source>
        <translation>Zamknięta</translation>
    </message>
</context>
<context>
    <name>QG_DlgRotate</name>
    <message>
        <source>Rotation Options</source>
        <translation>Opcje obrotów</translation>
    </message>
    <message>
        <source>Number of copies</source>
        <translation>Liczba kopii</translation>
    </message>
    <message>
        <source>&amp;Delete Original</source>
        <translation>&amp;Usuń oryginał</translation>
    </message>
    <message>
        <source>&amp;Keep Original</source>
        <translation>&amp;Zachowaj oryginał</translation>
    </message>
    <message>
        <source>&amp;Multiple Copies:</source>
        <translation>Kopie &amp;wielokrotne:</translation>
    </message>
    <message>
        <source>&amp;Angle (a):</source>
        <translation>&amp;Kąt (a):</translation>
    </message>
    <message>
        <source>Use current &amp;attributes</source>
        <translation>Użyj bieżących &amp;atrybutów</translation>
    </message>
    <message>
        <source>Use current &amp;layer</source>
        <translation>Użyj bieżącej &amp;warstwy</translation>
    </message>
    <message>
        <source>...</source>
        <translation>...</translation>
    </message>
</context>
<context>
    <name>QG_DlgRotate2</name>
    <message>
        <source>Rotate Two Options</source>
        <translation>Opcje obrotów podwójnych</translation>
    </message>
    <message>
        <source>Number of copies</source>
        <translation>Liczba kopii</translation>
    </message>
    <message>
        <source>&amp;Delete Original</source>
        <translation>&amp;Usuń oryginał</translation>
    </message>
    <message>
        <source>&amp;Keep Original</source>
        <translation>&amp;Zachowaj oryginał</translation>
    </message>
    <message>
        <source>&amp;Multiple Copies</source>
        <translation>Kopie &amp;wielokrotne</translation>
    </message>
    <message>
        <source>Angle (&amp;a):</source>
        <translation>Kąt (&amp;a):</translation>
    </message>
    <message>
        <source>Angle (&amp;b):</source>
        <translation>Kąt (&amp;b):</translation>
    </message>
    <message>
        <source>Use current &amp;attributes</source>
        <translation>Użyj bieżących &amp;atrybutów</translation>
    </message>
    <message>
        <source>Use current &amp;layer</source>
        <translation>Użyj bieżącej &amp;warstwy</translation>
    </message>
    <message>
        <source>...</source>
        <translation>...</translation>
    </message>
</context>
<context>
    <name>QG_DlgScale</name>
    <message>
        <source>Scaling Options</source>
        <translation>Opcje skalowania</translation>
    </message>
    <message>
        <source>Number of copies</source>
        <translation>Liczba kopii</translation>
    </message>
    <message>
        <source>Use current &amp;attributes</source>
        <translation>Użyj bieżących &amp;atrybutów</translation>
    </message>
    <message>
        <source>Use current &amp;layer</source>
        <translation>Użyj bieżącej &amp;warstwy</translation>
    </message>
    <message>
        <source>&amp;Delete Original</source>
        <translation>&amp;Usuń oryginał</translation>
    </message>
    <message>
        <source>&amp;Keep Original</source>
        <translation>&amp;Zachowaj oryginał</translation>
    </message>
    <message>
        <source>&amp;Multiple Copies</source>
        <translation>Kopie &amp;wielokrotne</translation>
    </message>
    <message>
        <source>...</source>
        <translation>...</translation>
    </message>
    <message>
        <source>Scale by the same factor at both x- and y- directions</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Isotropic Scaling</source>
        <translation>Skalowanie izotropowe</translation>
    </message>
    <message>
        <source>X</source>
        <translation>X</translation>
    </message>
    <message>
        <source>Y</source>
        <translation>Y</translation>
    </message>
</context>
<context>
    <name>QG_DlgSpline</name>
    <message>
        <source>Spline</source>
        <translation>Krzywa składana</translation>
    </message>
    <message>
        <source>Layer:</source>
        <translation>Warstwa:</translation>
    </message>
    <message>
        <source>Geometry</source>
        <translation>Geometria</translation>
    </message>
    <message>
        <source>Degree:</source>
        <translation>Stopień:</translation>
    </message>
    <message>
        <source>Closed</source>
        <translation>Zamknięta</translation>
    </message>
</context>
<context>
    <name>QG_DlgText</name>
    <message>
        <source>Text</source>
        <translation>Tekst</translation>
    </message>
    <message>
        <source>Text:</source>
        <translation>Tekst:</translation>
    </message>
    <message>
        <source>Clear Text</source>
        <translation>Wyczyść tekst</translation>
    </message>
    <message>
        <source>Load Text From File</source>
        <translation>Wczytaj tekst z pliku</translation>
    </message>
    <message>
        <source>Save Text To File</source>
        <translation>Zapisz tekst do pliku</translation>
    </message>
    <message>
        <source>Cut</source>
        <translation>Wytnij</translation>
    </message>
    <message>
        <source>Copy</source>
        <translation>Kopiuj</translation>
    </message>
    <message>
        <source>Paste</source>
        <translation>Wklej</translation>
    </message>
    <message>
        <source>Alignment</source>
        <translation>Wyrównanie</translation>
    </message>
    <message>
        <source>Top Right</source>
        <translation>Góra - prawo</translation>
    </message>
    <message>
        <source>Top Left</source>
        <translation>Góra - lewo</translation>
    </message>
    <message>
        <source>Middle Left</source>
        <translation>Środek - lewo</translation>
    </message>
    <message>
        <source>Middle Center</source>
        <translation>Środek - środek</translation>
    </message>
    <message>
        <source>Middle Right</source>
        <translation>Środek - prawo</translation>
    </message>
    <message>
        <source>Bottom Left</source>
        <translation>Dół - lewo</translation>
    </message>
    <message>
        <source>Bottom Right</source>
        <translation>Dół - prawo</translation>
    </message>
    <message>
        <source>Bottom Center</source>
        <translation>Dół - środek</translation>
    </message>
    <message>
        <source>Top Center</source>
        <translation>Góra - środek</translation>
    </message>
    <message>
        <source>Insert Symbol</source>
        <translation>Wstaw symbol</translation>
    </message>
    <message>
        <source>Degree (°)</source>
        <translation>Stopień (°)</translation>
    </message>
    <message>
        <source>Plus / Minus (±)</source>
        <translation>Plus / Minus (±)</translation>
    </message>
    <message>
        <source>At (@)</source>
        <translation>At (@)</translation>
    </message>
    <message>
        <source>Hash (#)</source>
        <translation>Hash (#)</translation>
    </message>
    <message>
        <source>Dollar ($)</source>
        <translation>Dolar ($)</translation>
    </message>
    <message>
        <source>Copyright (©)</source>
        <translation>Copyright (©)</translation>
    </message>
    <message>
        <source>Registered (®)</source>
        <translation>Zarejestrowany (®)</translation>
    </message>
    <message>
        <source>Paragraph (§)</source>
        <translation>Paragraf (§)</translation>
    </message>
    <message>
        <source>Pi (π)</source>
        <translation>Pi (π)</translation>
    </message>
    <message>
        <source>Pound (£)</source>
        <translation>Funt (£)</translation>
    </message>
    <message>
        <source>Yen (¥)</source>
        <translation>Jen (¥)</translation>
    </message>
    <message>
        <source>Times (×)</source>
        <translation>Razy (×)</translation>
    </message>
    <message>
        <source>Division (÷)</source>
        <translation>Dzielenie (÷)</translation>
    </message>
    <message>
        <source>Insert Unicode</source>
        <translation>Wstaw Unicode</translation>
    </message>
    <message>
        <source>Page:</source>
        <translation>Strona:</translation>
    </message>
    <message>
        <source>Char:</source>
        <translation>Znak:</translation>
    </message>
    <message>
        <source>[0000-007F] Basic Latin</source>
        <translation>[0000-007F] Basic Latin</translation>
    </message>
    <message>
        <source>[0080-00FF] Latin-1 Supplementary</source>
        <translation>[0080-00FF] Latin-1 Supplementary</translation>
    </message>
    <message>
        <source>[0100-017F] Latin Extended-A</source>
        <translation>[0100-017F] Latin Extended-A</translation>
    </message>
    <message>
        <source>[0180-024F] Latin Extended-B</source>
        <translation>[0180-024F] Latin Extended-B</translation>
    </message>
    <message>
        <source>[0250-02AF] IPA Extensions</source>
        <translation>[0250-02AF] IPA Extensions</translation>
    </message>
    <message>
        <source>[02B0-02FF] Spacing Modifier Letters</source>
        <translation>[02B0-02FF] Modyfikatory odstępu liter</translation>
    </message>
    <message>
        <source>[0300-036F] Combining Diacritical Marks</source>
        <translation>[0300-036F] Combining Diacritical Marks</translation>
    </message>
    <message>
        <source>[0370-03FF] Greek and Coptic</source>
        <translation>[0370-03FF] Greek and Coptic</translation>
    </message>
    <message>
        <source>[0400-04FF] Cyrillic</source>
        <translation>[0400-04FF] Cyrillic</translation>
    </message>
    <message>
        <source>[0500-052F] Cyrillic Supplementary</source>
        <translation>[0500-052F] Cyrillic Supplementary</translation>
    </message>
    <message>
        <source>[0530-058F] Armenian</source>
        <translation>[0530-058F] Armenian</translation>
    </message>
    <message>
        <source>[0590-05FF] Hebrew</source>
        <translation>[0590-05FF] Hebrew</translation>
    </message>
    <message>
        <source>[0600-06FF] Arabic</source>
        <translation>[0600-06FF] Arabic</translation>
    </message>
    <message>
        <source>[0700-074F] Syriac</source>
        <translation>[0700-074F] Syriac</translation>
    </message>
    <message>
        <source>[0780-07BF] Thaana</source>
        <translation>[0780-07BF] Thaana</translation>
    </message>
    <message>
        <source>[0900-097F] Devanagari</source>
        <translation>[0900-097F] Devanagari</translation>
    </message>
    <message>
        <source>[0980-09FF] Bengali</source>
        <translation>[0980-09FF] Bengali</translation>
    </message>
    <message>
        <source>[0A00-0A7F] Gurmukhi</source>
        <translation>[0A00-0A7F] Gurmukhi</translation>
    </message>
    <message>
        <source>[0A80-0AFF] Gujarati</source>
        <translation>[0A80-0AFF] Gujarati</translation>
    </message>
    <message>
        <source>[0B00-0B7F] Oriya</source>
        <translation>[0B00-0B7F] Oriya</translation>
    </message>
    <message>
        <source>[0B80-0BFF] Tamil</source>
        <translation>[0B80-0BFF] Tamil</translation>
    </message>
    <message>
        <source>[0C00-0C7F] Telugu</source>
        <translation>[0C00-0C7F] Telugu</translation>
    </message>
    <message>
        <source>[0C80-0CFF] Kannada</source>
        <translation>[0C80-0CFF] Kannada</translation>
    </message>
    <message>
        <source>[0D00-0D7F] Malayalam</source>
        <translation>[0D00-0D7F] Malayalam</translation>
    </message>
    <message>
        <source>[0D80-0DFF] Sinhala</source>
        <translation>[0D80-0DFF] Sinhala</translation>
    </message>
    <message>
        <source>[0E00-0E7F] Thai</source>
        <translation>[0E00-0E7F] Thai</translation>
    </message>
    <message>
        <source>[0E80-0EFF] Lao</source>
        <translation>[0E80-0EFF] Lao</translation>
    </message>
    <message>
        <source>[0F00-0FFF] Tibetan</source>
        <translation>[0F00-0FFF] Tibetan</translation>
    </message>
    <message>
        <source>[1000-109F] Myanmar</source>
        <translation>[1000-109F] Myanmar</translation>
    </message>
    <message>
        <source>[10A0-10FF] Georgian</source>
        <translation>[10A0-10FF] Georgian</translation>
    </message>
    <message>
        <source>[1100-11FF] Hangul Jamo</source>
        <translation>[1100-11FF] Hangul Jamo</translation>
    </message>
    <message>
        <source>[1200-137F] Ethiopic</source>
        <translation>[1200-137F] Ethiopic</translation>
    </message>
    <message>
        <source>[13A0-13FF] Cherokee</source>
        <translation>[13A0-13FF] Cherokee</translation>
    </message>
    <message>
        <source>[1400-167F] Unified Canadian Aboriginal Syllabic</source>
        <translation>[1400-167F] Unified Canadian Aboriginal Syllabic</translation>
    </message>
    <message>
        <source>[1680-169F] Ogham</source>
        <translation>[1680-169F] Ogham</translation>
    </message>
    <message>
        <source>[16A0-16FF] Runic</source>
        <translation>[16A0-16FF] Runic</translation>
    </message>
    <message>
        <source>[1700-171F] Tagalog</source>
        <translation>[1700-171F] Tagalog</translation>
    </message>
    <message>
        <source>[1720-173F] Hanunoo</source>
        <translation>[1720-173F] Hanunoo</translation>
    </message>
    <message>
        <source>[1740-175F] Buhid</source>
        <translation>[1740-175F] Buhid</translation>
    </message>
    <message>
        <source>[1760-177F] Tagbanwa</source>
        <translation>[1760-177F] Tagbanwa</translation>
    </message>
    <message>
        <source>[1780-17FF] Khmer</source>
        <translation>[1780-17FF] Khmer</translation>
    </message>
    <message>
        <source>[1800-18AF] Mongolian</source>
        <translation>[1800-18AF] Mongolian</translation>
    </message>
    <message>
        <source>[1E00-1EFF] Latin Extended Additional</source>
        <translation>[1E00-1EFF] Latin Extended Additional</translation>
    </message>
    <message>
        <source>[1F00-1FFF] Greek Extended</source>
        <translation>[1F00-1FFF] Greek Extended</translation>
    </message>
    <message>
        <source>[2000-206F] General Punctuation</source>
        <translation>[2000-206F] General Punctuation</translation>
    </message>
    <message>
        <source>[2070-209F] Superscripts and Subscripts</source>
        <translation>[2070-209F] Superscripts and Subscripts</translation>
    </message>
    <message>
        <source>[20A0-20CF] Currency Symbols</source>
        <translation>[20A0-20CF] Currency Symbols</translation>
    </message>
    <message>
        <source>[20D0-20FF] Combining Marks for Symbols</source>
        <translation>[20D0-20FF] Combining Marks for Symbols</translation>
    </message>
    <message>
        <source>[2100-214F] Letterlike Symbols</source>
        <translation>[2100-214F] Letterlike Symbols</translation>
    </message>
    <message>
        <source>[2150-218F] Number Forms</source>
        <translation>[2150-218F] Liczba Form</translation>
    </message>
    <message>
        <source>[2190-21FF] Arrows</source>
        <translation>[2190-21FF] Strzałki</translation>
    </message>
    <message>
        <source>[2200-22FF] Mathematical Operators</source>
        <translation>[2200-22FF] Mathematical Operators</translation>
    </message>
    <message>
        <source>[2300-23FF] Miscellaneous Technical</source>
        <translation>[2300-23FF] Miscellaneous Technical</translation>
    </message>
    <message>
        <source>[2400-243F] Control Pictures</source>
        <translation>[2400-243F] Control Pictures</translation>
    </message>
    <message>
        <source>[2440-245F] Optical Character Recognition</source>
        <translation>[2440-245F] Optical Character Recognition</translation>
    </message>
    <message>
        <source>[2460-24FF] Enclosed Alphanumerics</source>
        <translation>[2460-24FF] Enclosed Alphanumerics</translation>
    </message>
    <message>
        <source>[2500-257F] Box Drawing</source>
        <translation>[2500-257F] Box Drawing</translation>
    </message>
    <message>
        <source>[2580-259F] Block Elements</source>
        <translation>[2580-259F] Elementy Blokowe</translation>
    </message>
    <message>
        <source>[25A0-25FF] Geometric Shapes</source>
        <translation>[25A0-25FF] Figury geometryczne</translation>
    </message>
    <message>
        <source>[2600-26FF] Miscellaneous Symbols</source>
        <translation>[2600-26FF] Różnorakie symbole</translation>
    </message>
    <message>
        <source>[2700-27BF] Dingbats</source>
        <translation>[2700-27BF] Dingbats</translation>
    </message>
    <message>
        <source>[27C0-27EF] Miscellaneous Mathematical Symbols-A</source>
        <translation>[27C0-27EF] Miscellaneous Mathematical Symbols-A</translation>
    </message>
    <message>
        <source>[27F0-27FF] Supplemental Arrows-A</source>
        <translation>[27F0-27FF] Supplemental Arrows-A</translation>
    </message>
    <message>
        <source>[2800-28FF] Braille Patterns</source>
        <translation>[2800-28FF] Braille Patterns</translation>
    </message>
    <message>
        <source>[2900-297F] Supplemental Arrows-B</source>
        <translation>[2900-297F] Supplemental Arrows-B</translation>
    </message>
    <message>
        <source>[2980-29FF] Miscellaneous Mathematical Symbols-B</source>
        <translation>[2980-29FF] Miscellaneous Mathematical Symbols-B</translation>
    </message>
    <message>
        <source>[2A00-2AFF] Supplemental Mathematical Operators</source>
        <translation>[2A00-2AFF] Supplemental Mathematical Operators</translation>
    </message>
    <message>
        <source>[2E80-2EFF] CJK Radicals Supplement</source>
        <translation>[2E80-2EFF] CJK Radicals Supplement</translation>
    </message>
    <message>
        <source>[2F00-2FDF] Kangxi Radicals</source>
        <translation>[2F00-2FDF] Kangxi Radicals</translation>
    </message>
    <message>
        <source>[2FF0-2FFF] Ideographic Description Characters</source>
        <translation>[2FF0-2FFF] Ideographic Description Characters</translation>
    </message>
    <message>
        <source>[3000-303F] CJK Symbols and Punctuation</source>
        <translation>[3000-303F] CJK Symbols and Punctuation</translation>
    </message>
    <message>
        <source>[3040-309F] Hiragana</source>
        <translation>[3040-309F] Hiragana</translation>
    </message>
    <message>
        <source>[30A0-30FF] Katakana</source>
        <translation>[30A0-30FF] Katakana</translation>
    </message>
    <message>
        <source>[3100-312F] Bopomofo</source>
        <translation>[3100-312F] Bopomofo</translation>
    </message>
    <message>
        <source>[3130-318F] Hangul Compatibility Jamo</source>
        <translation>[3130-318F] Hangul Compatibility Jamo</translation>
    </message>
    <message>
        <source>[3190-319F] Kanbun</source>
        <translation>[3190-319F] Kanbun</translation>
    </message>
    <message>
        <source>[31A0-31BF] Bopomofo Extended</source>
        <translation>[31A0-31BF] Bopomofo Extended</translation>
    </message>
    <message>
        <source>[3200-32FF] Enclosed CJK Letters and Months</source>
        <translation>[3200-32FF] Enclosed CJK Letters and Months</translation>
    </message>
    <message>
        <source>[3300-33FF] CJK Compatibility</source>
        <translation>[3300-33FF] CJK Compatibility</translation>
    </message>
    <message>
        <source>[3400-4DBF] CJK Unified Ideographs Extension A</source>
        <translation>[3400-4DBF] CJK Unified Ideographs Extension A</translation>
    </message>
    <message>
        <source>[4E00-9FAF] CJK Unified Ideographs</source>
        <translation>[4E00-9FAF] CJK Unified Ideographs</translation>
    </message>
    <message>
        <source>[A000-A48F] Yi Syllables</source>
        <translation>[A000-A48F] Yi Syllables</translation>
    </message>
    <message>
        <source>[A490-A4CF] Yi Radicals</source>
        <translation>[A490-A4CF] Yi Radicals</translation>
    </message>
    <message>
        <source>[AC00-D7AF] Hangul Syllables</source>
        <translation>[AC00-D7AF] Hangul Syllables</translation>
    </message>
    <message>
        <source>[D800-DBFF] High Surrogates</source>
        <translation>[D800-DBFF] High Surrogates</translation>
    </message>
    <message>
        <source>[DC00-DFFF] Low Surrogate Area</source>
        <translation>[DC00-DFFF] Low Surrogate Area</translation>
    </message>
    <message>
        <source>[E000-F8FF] Private Use Area</source>
        <translation>[E000-F8FF] Private Use Area</translation>
    </message>
    <message>
        <source>[F900-FAFF] CJK Compatibility Ideographs</source>
        <translation>[F900-FAFF] CJK Compatibility Ideographs</translation>
    </message>
    <message>
        <source>[FB00-FB4F] Alphabetic Presentation Forms</source>
        <translation>[FB00-FB4F] Alphabetic Presentation Forms</translation>
    </message>
    <message>
        <source>[FB50-FDFF] Arabic Presentation Forms-A</source>
        <translation>[FB50-FDFF] Arabic Presentation Forms-A</translation>
    </message>
    <message>
        <source>[FE00-FE0F] Variation Selectors</source>
        <translation>[FE00-FE0F] Variation Selectors</translation>
    </message>
    <message>
        <source>[FE20-FE2F] Combining Half Marks</source>
        <translation>[FE20-FE2F] Combining Half Marks</translation>
    </message>
    <message>
        <source>[FE30-FE4F] CJK Compatibility Forms</source>
        <translation>[FE30-FE4F] CJK Compatibility Forms</translation>
    </message>
    <message>
        <source>[FE50-FE6F] Small Form Variants</source>
        <translation>[FE50-FE6F] Small Form Variants</translation>
    </message>
    <message>
        <source>[FE70-FEFF] Arabic Presentation Forms-B</source>
        <translation>[FE70-FEFF] Arabic Presentation Forms-B</translation>
    </message>
    <message>
        <source>[FF00-FFEF] Halfwidth and Fullwidth Forms</source>
        <translation>[FF00-FFEF] Halfwidth and Fullwidth Forms</translation>
    </message>
    <message>
        <source>[FFF0-FFFF] Specials</source>
        <translation>[FFF0-FFFF] Specials</translation>
    </message>
    <message>
        <source>[10300-1032F] Old Italic</source>
        <translation>[10300-1032F] Old Italic</translation>
    </message>
    <message>
        <source>[10330-1034F] Gothic</source>
        <translation>[10330-1034F] Gothic</translation>
    </message>
    <message>
        <source>[10400-1044F] Deseret</source>
        <translation>[10400-1044F] Deseret</translation>
    </message>
    <message>
        <source>[1D000-1D0FF] Byzantine Musical Symbols</source>
        <translation>[1D000-1D0FF] Byzantine Musical Symbols</translation>
    </message>
    <message>
        <source>[1D100-1D1FF] Musical Symbols</source>
        <translation>[1D100-1D1FF] Musical Symbols</translation>
    </message>
    <message>
        <source>[1D400-1D7FF] Mathematical Alphanumeric Symbols</source>
        <translation>[1D400-1D7FF] Mathematical Alphanumeric Symbols</translation>
    </message>
    <message>
        <source>[20000-2A6DF] CJK Unified Ideographs Extension B</source>
        <translation>[20000-2A6DF] CJK Unified Ideographs Extension B</translation>
    </message>
    <message>
        <source>[2F800-2FA1F] CJK Compatibility Ideographs Supplement</source>
        <translation>[2F800-2FA1F] CJK Compatibility Ideographs Supplement</translation>
    </message>
    <message>
        <source>[E0000-E007F] Tags</source>
        <translation>[E0000-E007F] Tags</translation>
    </message>
    <message>
        <source>[F0000-FFFFD] Supplementary Private Use Area-A</source>
        <translation>[F0000-FFFFD] Supplementary Private Use Area-A</translation>
    </message>
    <message>
        <source>[100000-10FFFD] Supplementary Private Use Area-B</source>
        <translation>[100000-10FFFD] Supplementary Private Use Area-B</translation>
    </message>
    <message>
        <source>&amp;Height:</source>
        <translation>&amp;Wysokość:</translation>
    </message>
    <message>
        <source>Layer:</source>
        <translation type="unfinished">Warstwa:</translation>
    </message>
    <message>
        <source>Font settings</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Angle:</source>
        <translation type="unfinished">Kąt:</translation>
    </message>
    <message>
        <source>Oblique:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Width factor:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Font:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Baseline Left</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>...</source>
        <translation type="unfinished">...</translation>
    </message>
    <message>
        <source>Baseline Right</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Baseline Center</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Fit</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Diameter (⌀)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>A&amp;ligned</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>&amp;Middle</source>
        <translation type="unfinished">&amp;Punkt centralny</translation>
    </message>
</context>
<context>
    <name>QG_ExitDialog</name>
    <message>
        <source>QCad</source>
        <translation>QCad</translation>
    </message>
    <message>
        <source>again Still No Text supplied.</source>
        <translation>znów nie dostarczono tekstu</translation>
    </message>
    <message>
        <source>Close All</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Close</source>
        <translation type="unfinished">Zamknij</translation>
    </message>
</context>
<context>
    <name>QG_FileDialog</name>
    <message>
        <source>Drawing Exchange DXF 2000 %1</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Drawing Exchange DXF R12 %1</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>LFF Font %1</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>QCad Font %1</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Jww Drawing %1</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Drawing Exchange %1</source>
        <translation type="unfinished">Format wymiany rysunków %1</translation>
    </message>
    <message>
        <source>QCad 1.x file %1</source>
        <translation>Plik aplikacji QCad 1.x %1</translation>
    </message>
    <message>
        <source>Drawing Exchange DXF 2007 %1</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Drawing Exchange DXF 2004 %1</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Drawing Exchange DXF R14 %1</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Block</source>
        <comment>block file</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Drawing</source>
        <comment>drawing file</comment>
        <translation type="unfinished">Rysunek</translation>
    </message>
    <message>
        <source>Open %1</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Save %1 As</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>dwg Drawing %1</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Untitled</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>QG_GraphicView</name>
    <message>
        <source>Edit Properties</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>QG_ImageOptionsDialog</name>
    <message>
        <source>Image Export Options</source>
        <translation>Opcje eksportu obrazu</translation>
    </message>
    <message>
        <source>Bitmap Size</source>
        <translation>Rozmiar bitmapy</translation>
    </message>
    <message>
        <source>Width:</source>
        <translation>Szerokość:</translation>
    </message>
    <message>
        <source>Height:</source>
        <translation>Wysokość:</translation>
    </message>
    <message>
        <source>Background</source>
        <translation>Tło</translation>
    </message>
    <message>
        <source>White</source>
        <translation>Biały</translation>
    </message>
    <message>
        <source>Resolution:</source>
        <translation>Rozdzielczość:</translation>
    </message>
    <message>
        <source>auto</source>
        <translation>auto</translation>
    </message>
    <message>
        <source>Colouring</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Black / White</source>
        <translation type="unfinished">Czarny / Biały</translation>
    </message>
    <message>
        <source>Coloured</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Borders</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Top / Bottom - Border:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Left / Right - Border:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>set same size</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>B&amp;lack</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>QG_LayerBox</name>
    <message>
        <source>- Unchanged -</source>
        <translation>- Niezmienione -</translation>
    </message>
</context>
<context>
    <name>QG_LayerDialog</name>
    <message>
        <source>Layer Settings</source>
        <translation>Ustawienia warstwy</translation>
    </message>
    <message>
        <source>Layer Name:</source>
        <translation>Nazwa warstwy:</translation>
    </message>
    <message>
        <source>Default Pen</source>
        <translation>Domyślne pióro</translation>
    </message>
    <message>
        <source>A Construction Layer has entities of infinite straight lines intended to be used for geometric construction.
The contents of a Construction Layer should not appear in printout.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Construction Layer</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>QG_LayerWidget</name>
    <message>
        <source>Show all layers</source>
        <translation>Pokaż wszystkie warstwy</translation>
    </message>
    <message>
        <source>Hide all layers</source>
        <translation>Ukryj wszystkie warstwy</translation>
    </message>
    <message>
        <source>Add a layer</source>
        <translation>Dodaj warstwę</translation>
    </message>
    <message>
        <source>Modify layer attributes / rename</source>
        <translation>Zmień atrybuty warstwy / zmień nazwę</translation>
    </message>
    <message>
        <source>Layer Menu</source>
        <translation>Menu Warstwy</translation>
    </message>
    <message>
        <source>&amp;Defreeze all Layers</source>
        <translation>&amp;Odblokuj wszystkie Warstwy</translation>
    </message>
    <message>
        <source>&amp;Freeze all Layers</source>
        <translation>&amp;Blokuj wszystkie Warstwy</translation>
    </message>
    <message>
        <source>&amp;Add Layer</source>
        <translation>&amp;Dodaj warstwę</translation>
    </message>
    <message>
        <source>&amp;Remove Layer</source>
        <translation>&amp;Usuń warstwę</translation>
    </message>
    <message>
        <source>Looking for matching layer names</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Edit Layer &amp;Attributes</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Toggle Layer &amp;Visibility</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Toggle Layer &amp;Printing</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Toggle &amp;Construction Layer</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Unlock all layers</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Lock all layers</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Remove layer</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Filter</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>&amp;Unlock all Layers</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>&amp;Lock all Layers</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Toggle Layer Loc&amp;k</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>&amp;Export Selected Layer(s)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Export &amp;Visible Layer(s)</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>QG_LibraryWidget</name>
    <message>
        <source>Directories</source>
        <translation>Katalogi</translation>
    </message>
    <message>
        <source>Insert</source>
        <translation>Wstaw</translation>
    </message>
    <message>
        <source>Refresh</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Rebuild</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>QG_LineTypeBox</name>
    <message>
        <source>By Layer</source>
        <translation>Według warstwy</translation>
    </message>
    <message>
        <source>By Block</source>
        <translation>Według bloku</translation>
    </message>
    <message>
        <source>No Pen</source>
        <translation>Bez pióra</translation>
    </message>
    <message>
        <source>Continuous</source>
        <translation>Ciągła</translation>
    </message>
    <message>
        <source>Dot</source>
        <translation>Kropka</translation>
    </message>
    <message>
        <source>Dot (small)</source>
        <translation>Kropka (mała)</translation>
    </message>
    <message>
        <source>Dot (large)</source>
        <translation>Kropka (duża)</translation>
    </message>
    <message>
        <source>Dash</source>
        <translation>Kreska</translation>
    </message>
    <message>
        <source>Dash (small)</source>
        <translation>Kreska (mała)</translation>
    </message>
    <message>
        <source>Dash (large)</source>
        <translation>Kreska (duża)</translation>
    </message>
    <message>
        <source>Dash Dot</source>
        <translation>Kreska kropka</translation>
    </message>
    <message>
        <source>Dash Dot (small)</source>
        <translation>Kreska kropka (mała)</translation>
    </message>
    <message>
        <source>Dash Dot (large)</source>
        <translation>Kreska kropka (duża)</translation>
    </message>
    <message>
        <source>Divide</source>
        <translation>Podzielona</translation>
    </message>
    <message>
        <source>Divide (small)</source>
        <translation>Podzielona (mała)</translation>
    </message>
    <message>
        <source>Divide (large)</source>
        <translation>Podzielona (duża)</translation>
    </message>
    <message>
        <source>Center</source>
        <translation>Środek</translation>
    </message>
    <message>
        <source>Center (small)</source>
        <translation>Środek (maly)</translation>
    </message>
    <message>
        <source>Center (large)</source>
        <translation>Środek (duży)</translation>
    </message>
    <message>
        <source>Border</source>
        <translation>Obwódka</translation>
    </message>
    <message>
        <source>Border (small)</source>
        <translation>Obwódka (mała)</translation>
    </message>
    <message>
        <source>Border (large)</source>
        <translation>Obwódka (duża)</translation>
    </message>
    <message>
        <source>- Unchanged -</source>
        <translation>- Niezmienione -</translation>
    </message>
    <message>
        <source>Dot (tiny)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Dash (tiny)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Dash Dot (tiny)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Divide (tiny)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Center (tiny)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Border (tiny)</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>QG_MouseWidget</name>
    <message>
        <source>Mouse</source>
        <translation>Mysz</translation>
    </message>
    <message>
        <source>Right</source>
        <translation>Prawo</translation>
    </message>
    <message>
        <source>Left</source>
        <translation>Lewo</translation>
    </message>
    <message>
        <source>&lt;!DOCTYPE HTML PUBLIC &quot;-//W3C//DTD HTML 4.0//EN&quot; &quot;http://www.w3.org/TR/REC-html40/strict.dtd&quot;&gt;
&lt;html&gt;&lt;head&gt;&lt;meta name=&quot;qrichtext&quot; content=&quot;1&quot; /&gt;&lt;style type=&quot;text/css&quot;&gt;
p, li { white-space: pre-wrap; }
&lt;/style&gt;&lt;/head&gt;&lt;body style=&quot; font-family:&apos;Ubuntu&apos;; font-size:11pt; font-weight:400; font-style:normal;&quot;&gt;
&lt;p style=&quot; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;&quot;&gt;&lt;span style=&quot; font-family:&apos;Helvetica&apos;; font-size:9pt;&quot;&gt;Hint about left/right mouse button actions&lt;/span&gt;&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>QG_PenToolBar</name>
    <message>
        <source>Line color</source>
        <translation type="unfinished">Kolor linii</translation>
    </message>
    <message>
        <source>Line width</source>
        <translation type="unfinished">Szerokość linii</translation>
    </message>
    <message>
        <source>Line type</source>
        <translation type="unfinished">Typ linii</translation>
    </message>
</context>
<context>
    <name>QG_PolylineOptions</name>
    <message>
        <source>wrong action type</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>QG_RecentFiles</name>
    <message>
        <source>&amp;%1 %2</source>
        <translation type="unfinished">&amp;%1 %2</translation>
    </message>
</context>
<context>
    <name>QG_SelectionWidget</name>
    <message>
        <source>Selection</source>
        <translation>Zaznaczenie</translation>
    </message>
    <message>
        <source>Selected</source>
        <translation>Zaznaczony</translation>
    </message>
    <message>
        <source>Total Length</source>
        <translation>Całkowita długość</translation>
    </message>
    <message>
        <source>&lt;!DOCTYPE HTML PUBLIC &quot;-//W3C//DTD HTML 4.0//EN&quot; &quot;http://www.w3.org/TR/REC-html40/strict.dtd&quot;&gt;
&lt;html&gt;&lt;head&gt;&lt;meta name=&quot;qrichtext&quot; content=&quot;1&quot; /&gt;&lt;style type=&quot;text/css&quot;&gt;
p, li { white-space: pre-wrap; }
&lt;/style&gt;&lt;/head&gt;&lt;body style=&quot; font-family:&apos;Helvetica&apos;; font-size:7pt; font-weight:400; font-style:normal;&quot;&gt;
&lt;p style=&quot; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;&quot;&gt;Number of selected entities&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>&lt;!DOCTYPE HTML PUBLIC &quot;-//W3C//DTD HTML 4.0//EN&quot; &quot;http://www.w3.org/TR/REC-html40/strict.dtd&quot;&gt;
&lt;html&gt;&lt;head&gt;&lt;meta name=&quot;qrichtext&quot; content=&quot;1&quot; /&gt;&lt;style type=&quot;text/css&quot;&gt;
p, li { white-space: pre-wrap; }
&lt;/style&gt;&lt;/head&gt;&lt;body style=&quot; font-family:&apos;Helvetica&apos;; font-size:7pt; font-weight:400; font-style:normal;&quot;&gt;
&lt;p style=&quot; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;&quot;&gt;Total length of selected entities&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>QG_SnapToolBar</name>
    <message>
        <source>Snap</source>
        <translation>Przyciągaj</translation>
    </message>
    <message>
        <source>Snap to Endpoints</source>
        <translation>Przyciągaj do punktów końcowych</translation>
    </message>
    <message>
        <source>Snap to equidistant points of entity</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Snap to center points</source>
        <translation>Przyciągaj do punktów centralnych</translation>
    </message>
    <message>
        <source>Snap to intersections automatically</source>
        <translation>Automatycznie lokalizuj punkty przecięcia</translation>
    </message>
    <message>
        <source>Snap to closest point on entity</source>
        <translation>Przyciągaj do najbliższego punktu lub obiektu</translation>
    </message>
    <message>
        <source>Snap to point with given distance to endpoint</source>
        <translation type="unfinished">Lokalizuj punkt z podanym odstępem od punktu końcowego</translation>
    </message>
    <message>
        <source>Snap to intersections manually</source>
        <translation>Lokalizuj punkty przecięcia ręcznie</translation>
    </message>
    <message>
        <source>Snap to grid</source>
        <translation>Przyciągaj do siatki</translation>
    </message>
    <message>
        <source>Restrict Horizontally</source>
        <translation>Ograniczaj poziomo</translation>
    </message>
    <message>
        <source>Restrict Vertically</source>
        <translation>Ograniczenie pionowo</translation>
    </message>
    <message>
        <source>Move relative Zero</source>
        <translation>Przesuń względne zero</translation>
    </message>
    <message>
        <source>Lock relative Zero</source>
        <translation>Blokuj względne zero</translation>
    </message>
    <message>
        <source>Free Snap</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Snap on grid</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Snap on Endpoints</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Snap on Entity</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Snap Center</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Snap Middle</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Snap Distance</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Snap Intersection</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Restrict Horizontal</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Restrict Vertical</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Restrict Orthogonal</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Restrict Nothing</source>
        <translation type="unfinished">Nic nie ograniczaj</translation>
    </message>
    <message>
        <source>Set relative zero position</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Lock relative zero position</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Exclusive Snap Mode</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Relative zero position is %1</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>locked</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>unlocked</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>QG_WidgetPen</name>
    <message>
        <source>Pen</source>
        <translation>Pióro</translation>
    </message>
    <message>
        <source>Line type:</source>
        <translation>Typ linii:</translation>
    </message>
    <message>
        <source>Width:</source>
        <translation>Szerokość:</translation>
    </message>
    <message>
        <source>Color:</source>
        <translation>Kolor:</translation>
    </message>
</context>
<context>
    <name>QG_WidthBox</name>
    <message>
        <source>By Layer</source>
        <translation>Według warstwy</translation>
    </message>
    <message>
        <source>By Block</source>
        <translation>Według bloku</translation>
    </message>
    <message>
        <source>Default</source>
        <translation>Domyślnie</translation>
    </message>
    <message>
        <source>0.00mm</source>
        <translation>0.00mm</translation>
    </message>
    <message>
        <source>0.05mm</source>
        <translation>0.05mm</translation>
    </message>
    <message>
        <source>0.09mm</source>
        <translation>0.09mm</translation>
    </message>
    <message>
        <source>0.13mm (ISO)</source>
        <translation>0.13mm (ISO)</translation>
    </message>
    <message>
        <source>0.15mm</source>
        <translation>0.15mm</translation>
    </message>
    <message>
        <source>0.18mm (ISO)</source>
        <translation>0.18mm (ISO)</translation>
    </message>
    <message>
        <source>0.20mm</source>
        <translation>0.20mm</translation>
    </message>
    <message>
        <source>0.25mm (ISO)</source>
        <translation>0.25mm (ISO)</translation>
    </message>
    <message>
        <source>0.30mm</source>
        <translation>0.30mm</translation>
    </message>
    <message>
        <source>0.35mm (ISO)</source>
        <translation>0.35mm (ISO)</translation>
    </message>
    <message>
        <source>0.40mm</source>
        <translation>0.40mm</translation>
    </message>
    <message>
        <source>0.50mm (ISO)</source>
        <translation>0.50mm (ISO)</translation>
    </message>
    <message>
        <source>0.53mm</source>
        <translation>0.53mm</translation>
    </message>
    <message>
        <source>0.60mm</source>
        <translation>0.60mm</translation>
    </message>
    <message>
        <source>0.70mm (ISO)</source>
        <translation>0.70mm (ISO)</translation>
    </message>
    <message>
        <source>0.80mm</source>
        <translation>0.80mm</translation>
    </message>
    <message>
        <source>0.90mm</source>
        <translation>0.90mm</translation>
    </message>
    <message>
        <source>1.00mm (ISO)</source>
        <translation>1.00mm (ISO)</translation>
    </message>
    <message>
        <source>1.06mm</source>
        <translation>1.06mm</translation>
    </message>
    <message>
        <source>1.20mm</source>
        <translation>1.20mm</translation>
    </message>
    <message>
        <source>1.40mm (ISO)</source>
        <translation>1.40mm (ISO)</translation>
    </message>
    <message>
        <source>1.58mm</source>
        <translation>1.58mm</translation>
    </message>
    <message>
        <source>2.00mm (ISO)</source>
        <translation>2.00mm (ISO)</translation>
    </message>
    <message>
        <source>2.11mm</source>
        <translation>2.11mm</translation>
    </message>
    <message>
        <source>- Unchanged -</source>
        <translation>- Niezmienione -</translation>
    </message>
</context>
<context>
    <name>QMessageBox</name>
    <message>
        <source>Warning</source>
        <translation>Uwaga</translation>
    </message>
    <message>
        <source>Remove Layer</source>
        <translation>Usuń warstwę</translation>
    </message>
    <message>
        <source>Layer &quot;%1&quot; can never be removed.</source>
        <translation>Warstwa &quot;%1&quot; nie może zostać usunięta.</translation>
    </message>
    <message>
        <source>Layer Dialog</source>
        <translation>Dialog warstwy</translation>
    </message>
    <message>
        <source>Remove Block</source>
        <translation>Usuń blok</translation>
    </message>
    <message>
        <source>Block &quot;%1&quot; and all its entities will be removed.</source>
        <translation>Blok &quot;%1&quot; oraz wszystkie jego obiekty zostaną usunięte.</translation>
    </message>
    <message>
        <source>Layer Properties</source>
        <translation>Właściwości warstwy</translation>
    </message>
    <message>
        <source>Layer with a name &quot;%1&quot; already exists. Please specify a different name.</source>
        <translation>Warstwa nazwana &quot;%1&quot; już istnieje. Proszę podać inną nazwę.</translation>
    </message>
    <message>
        <source>Layer &quot;%1&quot; and all entities on it will be removed.
This action can NOT be undone.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Layer &quot;0&quot; can never be removed.</source>
        <translation type="unfinished"></translation>
    </message>
    <message numerus="yes">
        <source>Remove %n layer(s)</source>
        <translation type="unfinished">
            <numerusform></numerusform>
            <numerusform></numerusform>
            <numerusform></numerusform>
        </translation>
    </message>
    <message>
        <source>Listed layers and all entities on them will be removed.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Warning: this action can NOT be undone!</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Warning: layer &quot;0&quot; can never be removed.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Layers for removal:</source>
        <translation type="unfinished"></translation>
    </message>
    <message numerus="yes">
        <source>Remove %n block(s)</source>
        <translation type="unfinished">
            <numerusform></numerusform>
            <numerusform></numerusform>
            <numerusform></numerusform>
        </translation>
    </message>
    <message>
        <source>Listed blocks and all their entities will be removed.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Blocks for removal:</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>QObject</name>
    <message>
        <source>Save Drawing As</source>
        <translation>Zapisz rysunek jako</translation>
    </message>
    <message>
        <source>%1 already exists.
Do you want to replace it?</source>
        <translation>%1 już istnieje.
Czy chcesz zastąpić?</translation>
    </message>
    <message>
        <source>Open Drawing</source>
        <translation>Otwórz rysunek</translation>
    </message>
    <message>
        <source>Open Image</source>
        <translation>Otwórz obraz</translation>
    </message>
    <message>
        <source>Windows Bitmap</source>
        <translation>Bitmapa Windows</translation>
    </message>
    <message>
        <source>Joint Photographic Experts Group</source>
        <translation>Format Joint Photographic Experts Group</translation>
    </message>
    <message>
        <source>Multiple-image Network Graphics</source>
        <translation>Format Multiple-image Network Graphics</translation>
    </message>
    <message>
        <source>Portable Bit Map</source>
        <translation>Przenośna bitmapa</translation>
    </message>
    <message>
        <source>Portable Grey Map</source>
        <translation>Przenośna bitmapa (odc. szarości)</translation>
    </message>
    <message>
        <source>Portable Network Graphic</source>
        <translation>Format Portable Network Graphic</translation>
    </message>
    <message>
        <source>Portable Pixel Map</source>
        <translation>Przenośna pixmapa</translation>
    </message>
    <message>
        <source>X Bitmap Format</source>
        <translation>Format X Bitmap</translation>
    </message>
    <message>
        <source>X Pixel Map</source>
        <translation>Format X Pixel Map</translation>
    </message>
    <message>
        <source>All Image Files (%1)</source>
        <translation>Wszystkie pliki obrazów (%1)</translation>
    </message>
    <message>
        <source>Graphics Interchange Format</source>
        <translation>Graphics Interchange Format</translation>
    </message>
    <message>
        <source>Drawing Exchange %1</source>
        <translation>Format wymiany rysunków %1</translation>
    </message>
    <message>
        <source>QCad 1.x file %1</source>
        <translation>Plik aplikacji QCad 1.x %1</translation>
    </message>
    <message>
        <source>Font %1</source>
        <translation>Czcionka %1</translation>
    </message>
    <message>
        <source>All Files (*.*)</source>
        <translation>Wszystkie pliki (*.*)</translation>
    </message>
    <message>
        <source>Inch</source>
        <translation>Cal</translation>
    </message>
    <message>
        <source>Foot</source>
        <translation>Stopa</translation>
    </message>
    <message>
        <source>Mile</source>
        <translation>Mila</translation>
    </message>
    <message>
        <source>Millimeter</source>
        <translation>Milimetr</translation>
    </message>
    <message>
        <source>Centimeter</source>
        <translation>Centrymetr</translation>
    </message>
    <message>
        <source>Meter</source>
        <translation>Metr</translation>
    </message>
    <message>
        <source>Kilometer</source>
        <translation>Kilometr</translation>
    </message>
    <message>
        <source>Microinch</source>
        <translation>Mikrocal</translation>
    </message>
    <message>
        <source>Mil</source>
        <translation>Mil</translation>
    </message>
    <message>
        <source>Yard</source>
        <translation>Jard</translation>
    </message>
    <message>
        <source>Angstrom</source>
        <translation>Angstrom</translation>
    </message>
    <message>
        <source>Nanometer</source>
        <translation>Nanometr</translation>
    </message>
    <message>
        <source>Micron</source>
        <translation>Mikron</translation>
    </message>
    <message>
        <source>Decimeter</source>
        <translation>Decymetr</translation>
    </message>
    <message>
        <source>Decameter</source>
        <translation>Dekametr</translation>
    </message>
    <message>
        <source>Hectometer</source>
        <translation>Hektometr</translation>
    </message>
    <message>
        <source>Gigameter</source>
        <translation>Gigametr</translation>
    </message>
    <message>
        <source>Astro</source>
        <translation>Astro</translation>
    </message>
    <message>
        <source>Lightyear</source>
        <translation>Rok świetlny</translation>
    </message>
    <message>
        <source>Parsec</source>
        <translation>Parsek</translation>
    </message>
    <message>
        <source>Loading..</source>
        <translation>Ładowanie..</translation>
    </message>
    <message>
        <source>Loading File %1..</source>
        <translation>Ładowanie pliku %1..</translation>
    </message>
    <message>
        <source>Loading...</source>
        <translation>Ładuję...</translation>
    </message>
    <message>
        <source>enter an integer number</source>
        <translation>wprowadź liczbę całkowitą</translation>
    </message>
    <message>
        <source>LibreCAD query</source>
        <translation>Zapytanie LibreCAD</translation>
    </message>
    <message>
        <source>enter a number</source>
        <translation>wprowadź liczbę</translation>
    </message>
    <message>
        <source>enter text</source>
        <translation>wprowadź tekst</translation>
    </message>
    <message>
        <source>LFF Font %1</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Jww %1</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Scalable Vector Graphics</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>SGI Black &amp; White</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Encapsulated PostScript</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Encapsulated PostScript Format</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Encapsulated PostScript Interchange</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Windows Icon</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>JPEG 2000</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>ZSoft Paintbrush</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>PC Paint</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>SGI-Bilddatei</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Targa Image File</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Tagged Image File Format</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Old Drawing Exchange %1</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Opened dwg file version %1.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>unknown error opening dwg file</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>can&apos;t open this dwg file</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>unsupported dwg version</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>error reading file header in dwg file</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>error reading header vars in dwg file</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>error reading classes in dwg file</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>error reading offsets in dwg file</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>error reading tables in dwg file</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>error reading entities in dwg file</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>dwg Drawing %1</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>File on disk modified. Please save to another file to avoid data loss! File modified: %1</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Hatch failed due to a gap=%1 between (%2, %3) and (%4, %5)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Warning</source>
        <translation type="unfinished">Uwaga</translation>
    </message>
    <message>
        <source>error reading blocks in dwg file</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>error reading objects in dwg file</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>: duplicated command: %1 is already taken by %2</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>point</source>
        <comment>draw point</comment>
        <translation type="unfinished">punkt</translation>
    </message>
    <message>
        <source>po</source>
        <comment>draw point</comment>
        <translation type="unfinished">pu</translation>
    </message>
    <message>
        <source>line</source>
        <comment>draw line</comment>
        <translation type="unfinished">linia</translation>
    </message>
    <message>
        <source>li</source>
        <comment>draw line</comment>
        <translation type="unfinished">ln</translation>
    </message>
    <message>
        <source>l</source>
        <comment>draw line</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>polyline</source>
        <comment>draw polyline</comment>
        <translation type="unfinished">polilinia</translation>
    </message>
    <message>
        <source>pl</source>
        <comment>draw polyline</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>free</source>
        <comment>draw freehand line</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>fhl</source>
        <comment>draw freehand line</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>spline</source>
        <comment>draw spline</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>spl</source>
        <comment>draw spline</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>spline2</source>
        <comment>spline through points</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>stp</source>
        <comment>spline through points</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>ptp</source>
        <comment>parallel through point</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>bisect</source>
        <comment>angle bisector</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>bi</source>
        <comment>angle bisector</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>tanpc</source>
        <comment>tangent point and circle</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>ortho</source>
        <comment>perpendicular line</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>rect</source>
        <comment>draw rectangle</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>polygon2v</source>
        <comment>polygon by 2 vertices</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>poly2</source>
        <comment>polygon by 2 vertices</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>circle</source>
        <comment>draw circle</comment>
        <translation type="unfinished">okrag</translation>
    </message>
    <message>
        <source>ci</source>
        <comment>draw circle</comment>
        <translation type="unfinished">og</translation>
    </message>
    <message>
        <source>c2</source>
        <comment>circle 2 points</comment>
        <translation type="unfinished">o2</translation>
    </message>
    <message>
        <source>c3</source>
        <comment>circle 3 points</comment>
        <translation type="unfinished">o3</translation>
    </message>
    <message>
        <source>tan3</source>
        <comment>circle tangent to 3</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>ct3</source>
        <comment>circle tangent to 3</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>ellipseinscribed</source>
        <comment>inscribed ellipse</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>ei</source>
        <comment>inscribed ellipse</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>ie</source>
        <comment>inscribed ellipse</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>hatch</source>
        <comment>draw hatch</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>ha</source>
        <comment>draw hatch</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>mtext</source>
        <comment>draw mtext</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>mtxt</source>
        <comment>draw mtext</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>text</source>
        <comment>draw text</comment>
        <translation type="unfinished">tekst</translation>
    </message>
    <message>
        <source>txt</source>
        <comment>draw text</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>regen</source>
        <comment>zoom - redraw</comment>
        <translation type="unfinished">regen</translation>
    </message>
    <message>
        <source>redraw</source>
        <comment>zoom - redraw</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>rg</source>
        <comment>zoom - redraw</comment>
        <translation type="unfinished">od</translation>
    </message>
    <message>
        <source>zr</source>
        <comment>zoom - redraw</comment>
        <translation type="unfinished">od</translation>
    </message>
    <message>
        <source>zoomwindow</source>
        <comment>zoom - window</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>zw</source>
        <comment>zoom - window</comment>
        <translation type="unfinished">pw</translation>
    </message>
    <message>
        <source>zoomauto</source>
        <comment>zoom - auto</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>za</source>
        <comment>zoom - auto</comment>
        <translation type="unfinished">pa</translation>
    </message>
    <message>
        <source>zoompan</source>
        <comment>zoom - pan</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>zp</source>
        <comment>zoom - pan</comment>
        <translation type="unfinished">pa</translation>
    </message>
    <message>
        <source>zoomprevious</source>
        <comment>zoom - previous</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>zv</source>
        <comment>zoom - previous</comment>
        <translation type="unfinished">po</translation>
    </message>
    <message>
        <source>kill</source>
        <comment>kill all actions</comment>
        <translation type="unfinished">zabij</translation>
    </message>
    <message>
        <source>k</source>
        <comment>kill all actions</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>undo</source>
        <comment>undo cycle</comment>
        <translation type="unfinished">cofnij</translation>
    </message>
    <message>
        <source>u</source>
        <comment>undo cycle</comment>
        <translation type="unfinished">c</translation>
    </message>
    <message>
        <source>redo</source>
        <comment>redo cycle</comment>
        <translation type="unfinished">przywroc</translation>
    </message>
    <message>
        <source>r</source>
        <comment>redo cycle</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>dimaligned</source>
        <comment>dimension - aligned</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>dimhorizontal</source>
        <comment>dimension - horizontal</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>dh</source>
        <comment>dimension - horizontal</comment>
        <translation type="unfinished">wpz</translation>
    </message>
    <message>
        <source>dimvertical</source>
        <comment>dimension - vertical</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>dv</source>
        <comment>dimension - vertical</comment>
        <translation type="unfinished">wpo</translation>
    </message>
    <message>
        <source>dimlinear</source>
        <comment>dimension - linear</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>dl</source>
        <comment>dimension - linear</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>dimangular</source>
        <comment>dimension - angular</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>dan</source>
        <comment>dimension - angular</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>dimradial</source>
        <comment>dimension - radial</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>dimdiametric</source>
        <comment>dimension - diametric</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>dimdiameter</source>
        <comment>dimension - diametric</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>dd</source>
        <comment>dimension - diametric</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>dimleader</source>
        <comment>dimension - leader</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>ld</source>
        <comment>dimension - leader</comment>
        <translation type="unfinished">wpr</translation>
    </message>
    <message>
        <source>dimregen</source>
        <comment>dimension - regenerate</comment>
        <translation type="unfinished">regwym</translation>
    </message>
    <message>
        <source>restrictnothing</source>
        <comment>restrict - nothing</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>rn</source>
        <comment>restrict - nothing</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>restrictorthogonal</source>
        <comment>restrict - orthogonal</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>rr</source>
        <comment>restrict - orthogonal</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>restricthorizontal</source>
        <comment>restrict - horizontal</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>rh</source>
        <comment>restrict - horizontal</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>restrictvertical</source>
        <comment>restrict - vertical</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>rv</source>
        <comment>restrict - vertical</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>mv</source>
        <comment>modify - move (copy)</comment>
        <translation type="unfinished">zp</translation>
    </message>
    <message>
        <source>bev</source>
        <comment>modify - bevel</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>ch</source>
        <comment>modify - bevel</comment>
        <translation type="unfinished">zz</translation>
    </message>
    <message>
        <source>fi</source>
        <comment>modify - fillet</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>cut</source>
        <comment>modify - divide (cut)</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>div</source>
        <comment>modify - divide (cut)</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>mi</source>
        <comment>modify -  mirror</comment>
        <translation type="unfinished">zo</translation>
    </message>
    <message>
        <source>rev</source>
        <comment>modify -  revert direction</comment>
        <translation type="unfinished">odw</translation>
    </message>
    <message>
        <source>ro</source>
        <comment>modify - rotate</comment>
        <translation type="unfinished">zob</translation>
    </message>
    <message>
        <source>sz</source>
        <comment>modify - scale</comment>
        <translation type="unfinished">zs</translation>
    </message>
    <message>
        <source>tm</source>
        <comment>modify - trim (extend)</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>tm2</source>
        <comment>modify - multi trim (extend)</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>le</source>
        <comment>modify - lengthen</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>ss</source>
        <comment>modify - stretch</comment>
        <translation type="unfinished">zr</translation>
    </message>
    <message>
        <source>er</source>
        <comment>modify - delete (erase)</comment>
        <translation type="unfinished">zu</translation>
    </message>
    <message>
        <source>del</source>
        <comment>modify - delete (erase)</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>xp</source>
        <comment>explode block/polyline into entities</comment>
        <translation type="unfinished">zx</translation>
    </message>
    <message>
        <source>snapfree</source>
        <comment>snap - free</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>os</source>
        <comment>snap - free</comment>
        <translation type="unfinished">np</translation>
    </message>
    <message>
        <source>snapcenter</source>
        <comment>snap - center</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>sc</source>
        <comment>snap - center</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>snapdist</source>
        <comment>snap - distance to endpoints</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>sd</source>
        <comment>snap - distance to endpoints</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>snapend</source>
        <comment>snap - end points</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>se</source>
        <comment>snap - end points</comment>
        <translation type="unfinished">pk</translation>
    </message>
    <message>
        <source>snapgrid</source>
        <comment>snap - grid</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>sg</source>
        <comment>snap - grid</comment>
        <translation type="unfinished">pds</translation>
    </message>
    <message>
        <source>snapintersection</source>
        <comment>snap - intersection</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>si</source>
        <comment>snap - intersection</comment>
        <translation type="unfinished">pdp</translation>
    </message>
    <message>
        <source>snapmiddle</source>
        <comment>snap - middle points</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>sm</source>
        <comment>snap - middle points</comment>
        <translation type="unfinished">pp</translation>
    </message>
    <message>
        <source>snaponentity</source>
        <comment>snap - on entity</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>sn</source>
        <comment>snap - on entity</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>np</source>
        <comment>snap - on entity</comment>
        <translation type="unfinished">pdnp</translation>
    </message>
    <message>
        <source>setrelativezero</source>
        <comment>set relative zero position</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>rz</source>
        <comment>set relative zero position</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>selectall</source>
        <comment>Select all entities</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>sa</source>
        <comment>Select all entities</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>deselectall</source>
        <comment>deselect all entities</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>tn</source>
        <comment>deselect all entities</comment>
        <translation type="unfinished">ow</translation>
    </message>
    <message>
        <source>attr</source>
        <comment>modify attribute</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>ma</source>
        <comment>modify attribute</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>prop</source>
        <comment>modify properties</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>dist</source>
        <comment>distance point to point</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>dpp</source>
        <comment>distance point to point</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>ang</source>
        <comment>measure angle</comment>
        <translation type="unfinished">kt</translation>
    </message>
    <message>
        <source>angle</source>
        <translation type="unfinished">kat</translation>
    </message>
    <message>
        <source>dpi</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>close</source>
        <translation type="unfinished">zamknij</translation>
    </message>
    <message>
        <source>chord length</source>
        <translation type="unfinished">dlugosc cieciwy</translation>
    </message>
    <message>
        <source>columns</source>
        <translation type="unfinished">kolumny</translation>
    </message>
    <message>
        <source>columnspacing</source>
        <translation type="unfinished">odstep_kolumny</translation>
    </message>
    <message>
        <source>factor</source>
        <translation type="unfinished">mnoznik</translation>
    </message>
    <message>
        <source>length</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>number</source>
        <translation type="unfinished">liczba</translation>
    </message>
    <message>
        <source>radius</source>
        <translation type="unfinished">promien</translation>
    </message>
    <message>
        <source>rows</source>
        <translation type="unfinished">wiersze</translation>
    </message>
    <message>
        <source>rowspacing</source>
        <translation type="unfinished">odstep_wiersze</translation>
    </message>
    <message>
        <source>through</source>
        <translation type="unfinished">poprzez</translation>
    </message>
    <message>
        <source>trim</source>
        <translation type="unfinished">wyrownaj</translation>
    </message>
    <message>
        <source>ang</source>
        <comment>angle</comment>
        <translation type="unfinished">kt</translation>
    </message>
    <message>
        <source>an</source>
        <comment>angle</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>center</source>
        <translation type="unfinished">srodek</translation>
    </message>
    <message>
        <source>cen</source>
        <comment>center</comment>
        <translation type="unfinished">sro</translation>
    </message>
    <message>
        <source>ce</source>
        <comment>center</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>cl</source>
        <comment>chord length</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>c</source>
        <comment>close</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>cols</source>
        <comment>columns</comment>
        <translation type="unfinished">kol</translation>
    </message>
    <message>
        <source>co</source>
        <comment>columns</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>columnspacing</source>
        <comment>columnspacing for inserts</comment>
        <translation type="unfinished">odstep_kolumny</translation>
    </message>
    <message>
        <source>colspacing</source>
        <comment>columnspacing for inserts</comment>
        <translation type="unfinished">odskol</translation>
    </message>
    <message>
        <source>cs</source>
        <comment>columnspacing for inserts</comment>
        <translation type="unfinished">ok</translation>
    </message>
    <message>
        <source>fact</source>
        <comment>factor</comment>
        <translation type="unfinished">mnoznik</translation>
    </message>
    <message>
        <source>f</source>
        <comment>factor</comment>
        <translation type="unfinished">m</translation>
    </message>
    <message>
        <source>help</source>
        <translation type="unfinished">pomoc</translation>
    </message>
    <message>
        <source>?</source>
        <comment>help</comment>
        <translation type="unfinished">?</translation>
    </message>
    <message>
        <source>length</source>
        <comment>length</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>len</source>
        <comment>length</comment>
        <translation type="unfinished">dl</translation>
    </message>
    <message>
        <source>l</source>
        <comment>length</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>length1</source>
        <comment>length1</comment>
        <translation type="unfinished">dlugosc1</translation>
    </message>
    <message>
        <source>len1</source>
        <comment>length1</comment>
        <translation type="unfinished">dl1</translation>
    </message>
    <message>
        <source>l1</source>
        <comment>length1</comment>
        <translation type="unfinished">d1</translation>
    </message>
    <message>
        <source>length2</source>
        <comment>length2</comment>
        <translation type="unfinished">dlugosc2</translation>
    </message>
    <message>
        <source>len2</source>
        <comment>length2</comment>
        <translation type="unfinished">dl2</translation>
    </message>
    <message>
        <source>l2</source>
        <comment>length2</comment>
        <translation type="unfinished">d2</translation>
    </message>
    <message>
        <source>number</source>
        <comment>number</comment>
        <translation type="unfinished">liczba</translation>
    </message>
    <message>
        <source>num</source>
        <comment>number</comment>
        <translation type="unfinished">licz</translation>
    </message>
    <message>
        <source>n</source>
        <comment>number</comment>
        <translation type="unfinished">lc</translation>
    </message>
    <message>
        <source>ra</source>
        <comment>radius</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>reversed</source>
        <comment>reversed</comment>
        <translation type="unfinished">odwrocony</translation>
    </message>
    <message>
        <source>rev</source>
        <comment>reversed</comment>
        <translation type="unfinished">odw</translation>
    </message>
    <message>
        <source>row</source>
        <comment>row</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>rowspacing</source>
        <comment>rowspacing for inserts</comment>
        <translation type="unfinished">odstep_wiersze</translation>
    </message>
    <message>
        <source>rs</source>
        <comment>rowspacing for inserts</comment>
        <translation type="unfinished">odswie</translation>
    </message>
    <message>
        <source>text</source>
        <translation type="unfinished">tekst</translation>
    </message>
    <message>
        <source>t</source>
        <comment>text</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>t</source>
        <comment>through</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>undo</source>
        <translation type="unfinished">cofnij</translation>
    </message>
    <message>
        <source>u</source>
        <comment>undo</comment>
        <translation type="unfinished">c</translation>
    </message>
    <message>
        <source>redo</source>
        <translation type="unfinished">przywroc</translation>
    </message>
    <message>
        <source>r</source>
        <comment>redo</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>back</source>
        <translation type="unfinished">wstecz</translation>
    </message>
    <message>
        <source>b</source>
        <comment>back</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>paperoffset</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>graphoffset</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Command: %1 (%2)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>RS_Commands:: command not found: %1</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Command not found: %1</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Accepted keycode: %1</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Available commands:</source>
        <translation type="unfinished">Dostępne komendy:</translation>
    </message>
    <message>
        <source>cal</source>
        <comment>command to trigger cli calculator</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>calculate</source>
        <comment>command to trigger cli calculator</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>None</source>
        <comment>unknown length unit</comment>
        <translation type="unfinished">Brak</translation>
    </message>
    <message>
        <source>error reading file metadata in dwg file</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Calculator error for input: </source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>bw</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>blackwhite</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>color</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>di</source>
        <comment>modify - divide (cut)</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>t2</source>
        <comment>modify - multi trim (extend)</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>mp</source>
        <comment>modify properties</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Block</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Circle</source>
        <translation type="unfinished">Okrąg</translation>
    </message>
    <message>
        <source>Curve</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Edit</source>
        <translation type="unfinished">Edycja</translation>
    </message>
    <message>
        <source>Ellipse</source>
        <translation type="unfinished">Elipsa</translation>
    </message>
    <message>
        <source>File</source>
        <translation type="unfinished">Plik</translation>
    </message>
    <message>
        <source>Dimension</source>
        <translation type="unfinished">Wymiar</translation>
    </message>
    <message>
        <source>Info</source>
        <translation type="unfinished">Informacja</translation>
    </message>
    <message>
        <source>Layer</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Line</source>
        <translation type="unfinished">Linia</translation>
    </message>
    <message>
        <source>Modify</source>
        <translation type="unfinished">Zmień</translation>
    </message>
    <message>
        <source>Options</source>
        <translation type="unfinished">Opcje</translation>
    </message>
    <message>
        <source>Other</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Polyline</source>
        <translation type="unfinished">Linia łamana</translation>
    </message>
    <message>
        <source>Restriction</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Select</source>
        <translation type="unfinished">Zaznacz</translation>
    </message>
    <message>
        <source>Snap</source>
        <translation type="unfinished">Przyciągaj</translation>
    </message>
    <message>
        <source>Snap Extras</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>View</source>
        <translation type="unfinished">Widok</translation>
    </message>
    <message>
        <source>Widgets</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Creators</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>All</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Invalid objects removed:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Pen Wizard</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Select objects</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Apply to selected</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Remove</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>You must input a distance first.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>cal</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Calculator mode: On</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Calculator mode: Off</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>License</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>No %1 layers found</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>line2p</source>
        <comment>draw line</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>lineang</source>
        <comment>angled line</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>la</source>
        <comment>angled line</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>linehor</source>
        <comment>horizontal line</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>lh</source>
        <comment>horizontal line</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>linever</source>
        <comment>vertical line</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>lv</source>
        <comment>vertical line</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>linerec</source>
        <comment>draw rectangle</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>re</source>
        <comment>draw rectangle</comment>
        <translation type="unfinished">pr</translation>
    </message>
    <message>
        <source>linepar</source>
        <comment>create parallel</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>lineoff</source>
        <comment>create parallel</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>pa</source>
        <comment>create parallel</comment>
        <translation type="unfinished">pp</translation>
    </message>
    <message>
        <source>ll</source>
        <comment>create parallel</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>lineparthro</source>
        <comment>parallel through point</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>lp</source>
        <comment>parallel through point</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>linebisect</source>
        <comment>angle bisector</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>linetancp</source>
        <comment>tangent point and circle</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>lt</source>
        <comment>tangent point and circle</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>linetan2c</source>
        <comment>tangent two circles</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>lc</source>
        <comment>tangent two circles</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>linetancper</source>
        <comment>tangent line and circle</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>or</source>
        <comment>tangent line and circle</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>lineperp</source>
        <comment>perpendicular line</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>lo</source>
        <comment>perpendicular line</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>linerelang</source>
        <comment>relative line</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>lr</source>
        <comment>relative line</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>polygoncencor</source>
        <comment>polygon centre point</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>pp</source>
        <comment>polygon centre point</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>polycp</source>
        <comment>polygon centre point</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>pcp</source>
        <comment>polygon centre point</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>polygoncentan</source>
        <comment>polygon centre vertex</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>pv</source>
        <comment>polygon centre vertex</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>polyct</source>
        <comment>polygon centre vertex</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>p2</source>
        <comment>polygon by 2 vertices</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>c</source>
        <comment>draw circle</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>circle2p</source>
        <comment>circle 2 points</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>c2p</source>
        <comment>circle 2 points</comment>
        <translation type="unfinished">o2p</translation>
    </message>
    <message>
        <source>circle2pr</source>
        <comment>circle 2 points radius</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>cc</source>
        <comment>circle 2 points radius</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>circle3p</source>
        <comment>circle 3 points</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>c3p</source>
        <comment>circle 3 points</comment>
        <translation type="unfinished">o3p</translation>
    </message>
    <message>
        <source>circlecr</source>
        <comment>circle point radius</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>cr</source>
        <comment>circle point radius</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>ccr</source>
        <comment>circle point radius</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>circletan2cp</source>
        <comment>circle 2 tangent point</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>tr</source>
        <comment>circle 2 tangent point</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>circletan2p</source>
        <comment>circle tangent 2 points</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>td</source>
        <comment>circle tangent 2 points</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>circletan2cr</source>
        <comment>circle 2 tangent radius</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>tc</source>
        <comment>circle 2 tangent radius</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>circletan3</source>
        <comment>circle tangent to 3</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>t3</source>
        <comment>circle tangent to 3</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>arc</source>
        <comment>arc point radius</comment>
        <translation type="unfinished">luk</translation>
    </message>
    <message>
        <source>ar</source>
        <comment>arc point radius</comment>
        <translation type="unfinished">lk</translation>
    </message>
    <message>
        <source>a</source>
        <comment>arc point radius</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>arc3p</source>
        <comment>draw 3pt arc</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>a3</source>
        <comment>draw 3pt arc</comment>
        <translation type="unfinished">ł3</translation>
    </message>
    <message>
        <source>arctan</source>
        <comment>arc tangent</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>at</source>
        <comment>arc tangent</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>sf</source>
        <comment>draw spline</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>sp</source>
        <comment>spline through points</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>arcellc2ax</source>
        <comment>arc ellipse</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>ae</source>
        <comment>arc ellipse</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>fh</source>
        <comment>draw freehand line</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>ellipsec2p</source>
        <comment>ellipse axis</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>ea</source>
        <comment>ellipse axis</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>ellipse3p</source>
        <comment>ellipse foci</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>ef</source>
        <comment>ellipse foci</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>ellipse4p</source>
        <comment>ellipse 4 point</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>e4</source>
        <comment>ellipse 4 point</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>ellipsec3p</source>
        <comment>ellipse center 3 point</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>e3</source>
        <comment>ellipse center 3 point</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>plineadd</source>
        <comment>pl add node</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>pi</source>
        <comment>pl add node</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>plineapp</source>
        <comment>pl append node</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>pn</source>
        <comment>pl append node</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>plinedel</source>
        <comment>pl delete node</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>pd</source>
        <comment>pl delete node</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>plinedeltwn</source>
        <comment>pl del between nodes</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>pr</source>
        <comment>pl del between nodes</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>plinetrm</source>
        <comment>pl trim segments</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>pt</source>
        <comment>pl trim segments</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>plinepar</source>
        <comment>pl equidistant</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>pe</source>
        <comment>pl equidistant</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>plinejoin</source>
        <comment>pl join</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>pj</source>
        <comment>pl join</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>sx</source>
        <comment>deselect all entities</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>invertselect</source>
        <comment>invert select</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>is</source>
        <comment>invert select</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>ds</source>
        <comment>dimension - aligned</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>dimradius</source>
        <comment>dimension - radial</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>dr</source>
        <comment>dimension - radial</comment>
        <translation type="unfinished">wl</translation>
    </message>
    <message>
        <source>da</source>
        <comment>dimension - angular</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>dg</source>
        <comment>dimension - regenerate</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>modmove</source>
        <comment>modify - move (copy)</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>modrotate</source>
        <comment>modify - rotate</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>modscale</source>
        <comment>modify - scale</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>modmirror</source>
        <comment>modify -  mirror</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>modmovrot</source>
        <comment>modify - move rotate</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>mr</source>
        <comment>modify - move rotate</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>mod2rot</source>
        <comment>modify - rotate2</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>r2</source>
        <comment>modify - rotate2</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>modrevert</source>
        <comment>modify -  revert direction</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>md</source>
        <comment>modify -  revert direction</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>modtrim</source>
        <comment>modify - trim (extend)</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>modtrim2</source>
        <comment>modify - multi trim (extend)</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>modlengthen</source>
        <comment>modify - lengthen</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>modoffset</source>
        <comment>modify - offset</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>mo</source>
        <comment>modify - offset</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>moff</source>
        <comment>modify - offset</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>modbevel</source>
        <comment>modify - bevel</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>modfillet</source>
        <comment>modify - fillet</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>moddivide</source>
        <comment>modify - divide (cut)</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>modstretch</source>
        <comment>modify - stretch</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>modproperties</source>
        <comment>modify properties</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>modattr</source>
        <comment>modify attribute</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>modexpltext</source>
        <comment>explode text strings</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>xt</source>
        <comment>explode text strings</comment>
        <translation type="unfinished">zwx</translation>
    </message>
    <message>
        <source>modexplode</source>
        <comment>explode block/polyline into entities</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>moddelete</source>
        <comment>modify - delete (erase)</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>infodistance</source>
        <comment>distance point to point</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>id</source>
        <comment>distance point to point</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>infodistep</source>
        <comment>distance entity to point</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>ii</source>
        <comment>distance entity to point</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>dep</source>
        <comment>distance entity to point</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>infoangle</source>
        <comment>measure angle</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>ia</source>
        <comment>measure angle</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>infoarea</source>
        <comment>measure area</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>aa</source>
        <comment>measure area</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>mt</source>
        <comment>draw mtext</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>tx</source>
        <comment>draw text</comment>
        <translation type="unfinished">tk</translation>
    </message>
    <message>
        <source>so</source>
        <comment>snap - free</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>ki</source>
        <comment>kill all actions</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>un</source>
        <comment>undo cycle</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>rd</source>
        <comment>redo cycle</comment>
        <translation type="unfinished">od</translation>
    </message>
    <message>
        <source>drawpref</source>
        <comment>drawing preferences</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>dp</source>
        <comment>drawing preferences</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>equation</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>length1</source>
        <comment>bevel/fillet length1</comment>
        <translation type="unfinished">dlugosc1</translation>
    </message>
    <message>
        <source>length2</source>
        <comment>bevel/fillet length2</comment>
        <translation type="unfinished">dlugosc2</translation>
    </message>
    <message>
        <source>eqn</source>
        <comment>equation</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>eq</source>
        <comment>equation</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Custom</source>
        <comment>Paper format</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>A0</source>
        <comment>Paper format</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>A1</source>
        <comment>Paper format</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>A2</source>
        <comment>Paper format</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>A3</source>
        <comment>Paper format</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>A4</source>
        <comment>Paper format</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Letter / ANSI A</source>
        <comment>Paper format</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Legal</source>
        <comment>Paper format</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Tabloid / ANSI B</source>
        <comment>Paper format</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>ANSI C</source>
        <comment>Paper format</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>ANSI D</source>
        <comment>Paper format</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>ANSI E</source>
        <comment>Paper format</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Arch A</source>
        <comment>Paper format</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Arch B</source>
        <comment>Paper format</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Arch C</source>
        <comment>Paper format</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Arch D</source>
        <comment>Paper format</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Arch E</source>
        <comment>Paper format</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>custom</source>
        <comment>Paper format</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>a0</source>
        <comment>Paper format</comment>
        <translation type="unfinished">ł0</translation>
    </message>
    <message>
        <source>a1</source>
        <comment>Paper format</comment>
        <translation type="unfinished">ł1</translation>
    </message>
    <message>
        <source>a2</source>
        <comment>Paper format</comment>
        <translation type="unfinished">ł2</translation>
    </message>
    <message>
        <source>a3</source>
        <comment>Paper format</comment>
        <translation type="unfinished">ł3</translation>
    </message>
    <message>
        <source>a4</source>
        <comment>Paper format</comment>
        <translation type="unfinished">ł4</translation>
    </message>
    <message>
        <source>letter</source>
        <comment>Paper format</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>legal</source>
        <comment>Paper format</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>tabloid</source>
        <comment>Paper format</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>ansi c</source>
        <comment>Paper format</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>ansi d</source>
        <comment>Paper format</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>ansi e</source>
        <comment>Paper format</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>arch a</source>
        <comment>Paper format</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>arch b</source>
        <comment>Paper format</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>arch c</source>
        <comment>Paper format</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>arch d</source>
        <comment>Paper format</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>arch e</source>
        <comment>Paper format</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>DWG support is not complete!</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>If this file fails to open try an older DWG format</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>or try to find a converter to make it a DXF file.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Information</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Error</source>
        <comment>fileImport</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Import error:</source>
        <comment>fileImport</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Anyhow, there are some entities identified.</source>
        <comment>dwgImport</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>If you open the file now, the drawing may be not complete or unusable.</source>
        <comment>dwgImport</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Ignore error and open the file?</source>
        <comment>dwgImport</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>no DXF/DWG error</source>
        <comment>RS_FilterDXFRW</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>error opening DXF/DWG file</source>
        <comment>RS_FilterDXFRW</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>unsupported DXF/DWG file version</source>
        <comment>RS_FilterDXFRW</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>error reading DXF/DWG meta data</source>
        <comment>RS_FilterDXFRW</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>error reading DXF/DWG file header</source>
        <comment>RS_FilterDXFRW</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>error reading DXF/DWG header dara</source>
        <comment>RS_FilterDXFRW</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>error reading DXF/DWG object map</source>
        <comment>RS_FilterDXFRW</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>error reading DXF/DWG classes</source>
        <comment>RS_FilterDXFRW</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>error reading DXF/DWG tables</source>
        <comment>RS_FilterDXFRW</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>error reading DXF/DWG blocks</source>
        <comment>RS_FilterDXFRW</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>error reading DXF/DWG entities</source>
        <comment>RS_FilterDXFRW</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>error reading DXF/DWG objects</source>
        <comment>RS_FilterDXFRW</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>error reading DXF/DWG sections</source>
        <comment>RS_FilterDXFRW</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>error reading DXF/DWG code</source>
        <comment>RS_FilterDXFRW</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>undefined error</source>
        <comment>RS_FilterInterface</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>usage: </source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source> [options] &lt;dxf_files&gt;</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source> *.dxf</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>-- print all dxf files to pdf files with the same names.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source> -o some.pdf *.dxf</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>-- print all dxf files to &apos;some.pdf&apos; file.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Auto fit and center drawing to page.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Auto center drawing on page.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Print grayscale.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Print monochrome (black/white).</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Paper size (Width x Height) in mm.</source>
        <comment>WxH</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Output resolution (DPI).</source>
        <comment>integer</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Output scale. E.g.: 0.01 (for 1:100 scale).</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Paper margins in mm (integer or float).</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Print on multiple pages (Horiz. x Vert.).</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Output PDF file.</source>
        <comment>file</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Target output directory.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>&lt;dxf_files&gt;</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Input DXF file(s)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Keycode mode</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Load command file</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Paste multiple commands</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Combine all layers</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>File &quot;%1&quot; already exists. Do you want to replace it?</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>/CustomColor%1</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Custom Picked</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>noname</source>
        <comment>default layer name</comment>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>RS_ActionBlocksCreate</name>
    <message>
        <source>Specify reference point</source>
        <translation>Wskaż punkt odniesienia</translation>
    </message>
    <message>
        <source>Cancel</source>
        <translation>Anuluj</translation>
    </message>
</context>
<context>
    <name>RS_ActionBlocksInsert</name>
    <message>
        <source>Not a valid expression</source>
        <translation>Nieprawidłowe wyrażenie</translation>
    </message>
    <message>
        <source>Specify reference point</source>
        <translation>Wskaż punkt odniesienia</translation>
    </message>
    <message>
        <source>Cancel</source>
        <translation>Anuluj</translation>
    </message>
    <message>
        <source>Enter angle:</source>
        <translation>Wprowadź kąt:</translation>
    </message>
    <message>
        <source>Enter factor:</source>
        <translation>Wprowadź mnożnik:</translation>
    </message>
    <message>
        <source>Enter columns:</source>
        <translation>Wprowadź kolumny:</translation>
    </message>
    <message>
        <source>Enter rows:</source>
        <translation>Wprowadź wiersze:</translation>
    </message>
    <message>
        <source>Enter column spacing:</source>
        <translation>Wprowadź odległość pomiędzy kolumnami:</translation>
    </message>
    <message>
        <source>Enter row spacing:</source>
        <translation>Wprowadź odległość pomiędzy wierszami:</translation>
    </message>
    <message>
        <source></source>
        <translation></translation>
    </message>
    <message>
        <source>Block cannot contain an insert of itself.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source> has nested insert of current block in:
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>
This block cannot be inserted.</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>RS_ActionBlocksSave</name>
    <message>
        <source>No block activated to save</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>RS_ActionDefault</name>
    <message>
        <source>Choose second edge</source>
        <translation>Wybierz drugą krawędź</translation>
    </message>
    <message>
        <source>Back</source>
        <translation>Wstecz</translation>
    </message>
</context>
<context>
    <name>RS_ActionDimAligned</name>
    <message>
        <source>Specify first extension line origin</source>
        <translation>Wskaż początek pierwszej linii rozszerzenia</translation>
    </message>
    <message>
        <source>Cancel</source>
        <translation>Anuluj</translation>
    </message>
    <message>
        <source>Specify second extension line origin</source>
        <translation>Wskaż początek drugiej linii rozszerzenia</translation>
    </message>
    <message>
        <source>Back</source>
        <translation>Wstecz</translation>
    </message>
    <message>
        <source>Specify dimension line location</source>
        <translation>Wskaż położenie linii wymiarowej</translation>
    </message>
    <message>
        <source>Enter dimension text:</source>
        <translation>Wprowadź tekst wymiaru:</translation>
    </message>
</context>
<context>
    <name>RS_ActionDimAngular</name>
    <message>
        <source>Select first line</source>
        <translation>Zaznacz pierwszą linię</translation>
    </message>
    <message>
        <source>Cancel</source>
        <translation>Anuluj</translation>
    </message>
    <message>
        <source>Select second line</source>
        <translation>Zaznacz drugą linię</translation>
    </message>
    <message>
        <source>Specify dimension arc line location</source>
        <translation>Wskaż położenie linii wymiarowej łuku</translation>
    </message>
    <message>
        <source>Enter dimension text:</source>
        <translation>Wprowadź tekst wymiaru:</translation>
    </message>
</context>
<context>
    <name>RS_ActionDimDiametric</name>
    <message>
        <source>Not a circle or arc entity</source>
        <translation>Obiekt nie jest okręgiem ani łukiem</translation>
    </message>
    <message>
        <source>Not a valid expression</source>
        <translation>Nieprawidłowe wyrażenie</translation>
    </message>
    <message>
        <source>Select arc or circle entity</source>
        <translation>Zaznacz obiekt typu łuk lub okrąg</translation>
    </message>
    <message>
        <source>Cancel</source>
        <translation>Anuluj</translation>
    </message>
    <message>
        <source>Specify dimension line location</source>
        <translation>Wskaż położenie linii wymiarowej</translation>
    </message>
    <message>
        <source>Enter dimension text:</source>
        <translation>Wprowadź tekst wymiaru:</translation>
    </message>
</context>
<context>
    <name>RS_ActionDimLeader</name>
    <message>
        <source>Specify target point</source>
        <translation>Wskaż punkt docelowy</translation>
    </message>
    <message>
        <source>Cancel</source>
        <translation>Anuluj</translation>
    </message>
    <message>
        <source>Specify next point</source>
        <translation>Wskaż następny punkt</translation>
    </message>
    <message>
        <source>Finish</source>
        <translation>Zakończ</translation>
    </message>
</context>
<context>
    <name>RS_ActionDimLinear</name>
    <message>
        <source>Not a valid expression</source>
        <translation>Nieprawidłowe wyrażenie</translation>
    </message>
    <message>
        <source>Specify first extension line origin</source>
        <translation>Wskaż początek pierwszej linii rozszerzenia</translation>
    </message>
    <message>
        <source>Cancel</source>
        <translation>Anuluj</translation>
    </message>
    <message>
        <source>Specify second extension line origin</source>
        <translation>Wskaż początek drugiej linii rozszerzenia</translation>
    </message>
    <message>
        <source>Back</source>
        <translation>Wstecz</translation>
    </message>
    <message>
        <source>Specify dimension line location</source>
        <translation>Wskaż położenie linii wymiarowej</translation>
    </message>
    <message>
        <source>Enter dimension text:</source>
        <translation>Wprowadź tekst wymiaru:</translation>
    </message>
    <message>
        <source>Enter dimension line angle:</source>
        <translation>Wskaż położenie linii wymiarowej:</translation>
    </message>
</context>
<context>
    <name>RS_ActionDimRadial</name>
    <message>
        <source>Not a circle or arc entity</source>
        <translation>Obiekt nie jest okręgiem ani łukiem</translation>
    </message>
    <message>
        <source>Not a valid expression</source>
        <translation>Nieprawidłowe wyrażenie</translation>
    </message>
    <message>
        <source>Select arc or circle entity</source>
        <translation>Zaznacz obiekt typu łuk lub okrąg</translation>
    </message>
    <message>
        <source>Cancel</source>
        <translation>Anuluj</translation>
    </message>
    <message>
        <source>Specify dimension line position or enter angle:</source>
        <translation>Wskaż położenie linii wymiarowej lub wprowadź kąt:</translation>
    </message>
    <message>
        <source>Enter dimension text:</source>
        <translation>Wprowadź tekst wymiaru:</translation>
    </message>
</context>
<context>
    <name>RS_ActionDrawArc</name>
    <message>
        <source>Not a valid expression</source>
        <translation>Nieprawidłowe wyrażenie</translation>
    </message>
    <message>
        <source>Not a valid chord length</source>
        <translation>Nieprawidłowa długość cięciwy</translation>
    </message>
    <message>
        <source>Specify center</source>
        <translation>Wskaż środek</translation>
    </message>
    <message>
        <source>Cancel</source>
        <translation>Anuluj</translation>
    </message>
    <message>
        <source>Specify radius</source>
        <translation>Wprowadź promień</translation>
    </message>
    <message>
        <source>Back</source>
        <translation>Wstecz</translation>
    </message>
    <message>
        <source>Specify start angle:</source>
        <translation>Wskaż kąt startowy:</translation>
    </message>
    <message>
        <source>Specify included angle:</source>
        <translation>Wprowadź kąt zawarty:</translation>
    </message>
    <message>
        <source>Specify chord length:</source>
        <translation>Wprowadź długość cięciwy:</translation>
    </message>
    <message>
        <source>Specify end angle or [angle/chord length]</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>RS_ActionDrawArc3P</name>
    <message>
        <source>Invalid arc data.</source>
        <translation>Nieprawidłowe dane łuku.</translation>
    </message>
    <message>
        <source>Cancel</source>
        <translation>Anuluj</translation>
    </message>
    <message>
        <source>Specify second point</source>
        <translation>Wskaż drugi punkt</translation>
    </message>
    <message>
        <source>Back</source>
        <translation>Wstecz</translation>
    </message>
    <message>
        <source>Specify endpoint</source>
        <translation>Wskaż punkt końcowy</translation>
    </message>
    <message>
        <source>Specify startpoint or [center]</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>RS_ActionDrawArcTangential</name>
    <message>
        <source>Specify base entity</source>
        <translation>Zaznacz obiekt podstawowy</translation>
    </message>
    <message>
        <source>Cancel</source>
        <translation>Anuluj</translation>
    </message>
    <message>
        <source>Specify end angle</source>
        <translation>Wskaż kąt końcowy</translation>
    </message>
    <message>
        <source>Back</source>
        <translation>Wstecz</translation>
    </message>
    <message>
        <source>Specify end point</source>
        <translation>Zdefiniuj punkt końcowy</translation>
    </message>
</context>
<context>
    <name>RS_ActionDrawCircle</name>
    <message>
        <source>Not a valid expression</source>
        <translation>Nieprawidłowe wyrażenie</translation>
    </message>
    <message>
        <source>Specify center</source>
        <translation>Wskaż środek</translation>
    </message>
    <message>
        <source>Cancel</source>
        <translation>Anuluj</translation>
    </message>
    <message>
        <source>Back</source>
        <translation>Wstecz</translation>
    </message>
    <message>
        <source>Specify point on circle</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>RS_ActionDrawCircle2P</name>
    <message>
        <source>Invalid Circle data.</source>
        <translation>Nieprawidłowe dane okręgu.</translation>
    </message>
    <message>
        <source>Specify first point</source>
        <translation>Wskaż pierwszy punkt</translation>
    </message>
    <message>
        <source>Cancel</source>
        <translation>Anuluj</translation>
    </message>
    <message>
        <source>Specify second point</source>
        <translation>Wskaż drugi punkt</translation>
    </message>
    <message>
        <source>Back</source>
        <translation>Wstecz</translation>
    </message>
</context>
<context>
    <name>RS_ActionDrawCircle3P</name>
    <message>
        <source>Invalid circle data.</source>
        <translation>Nieprawidłowe dane okręgu.</translation>
    </message>
    <message>
        <source>Specify first point</source>
        <translation>Wskaż pierwszy punkt</translation>
    </message>
    <message>
        <source>Cancel</source>
        <translation>Anuluj</translation>
    </message>
    <message>
        <source>Specify second point</source>
        <translation>Wskaż drugi punkt</translation>
    </message>
    <message>
        <source>Back</source>
        <translation>Wstecz</translation>
    </message>
    <message>
        <source>Specify third point</source>
        <translation>Wskaż trzeci punkt</translation>
    </message>
</context>
<context>
    <name>RS_ActionDrawCircleCR</name>
    <message>
        <source>Not a valid expression</source>
        <translation>Nieprawidłowe wyrażenie</translation>
    </message>
    <message>
        <source>Specify circle center</source>
        <translation>Wskaż środek okręgu</translation>
    </message>
    <message>
        <source>Cancel</source>
        <translation>Anuluj</translation>
    </message>
    <message>
        <source>Specify circle radius</source>
        <translation>Wskaż promień okręgu</translation>
    </message>
    <message>
        <source>Back</source>
        <translation>Wstecz</translation>
    </message>
    <message>
        <source>radius=%1 is invalid (expression)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>radius=%1 is invalid (negative)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>radius=%1 is invalid (zero)</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>RS_ActionDrawCircleInscribe</name>
    <message>
        <source>Specify the first line</source>
        <translation>Zdefiniuj pierwszą linię</translation>
    </message>
    <message>
        <source>Cancel</source>
        <translation>Anuluj</translation>
    </message>
    <message>
        <source>Specify the second line</source>
        <translation>Zdefiniuj drugą linię</translation>
    </message>
    <message>
        <source>Back</source>
        <translation>Wstecz</translation>
    </message>
    <message>
        <source>Specify the third line</source>
        <translation>Zdefiniuj trzecią linię</translation>
    </message>
</context>
<context>
    <name>RS_ActionDrawCircleTan1_2P</name>
    <message>
        <source>Cancel</source>
        <translation type="unfinished">Anuluj</translation>
    </message>
    <message>
        <source>Specify the first point on the tangent circle</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Back</source>
        <translation type="unfinished">Wstecz</translation>
    </message>
    <message>
        <source>Specify the second point on the tangent circle</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Select the center of the tangent circle</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Specify a line/arc/circle</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>RS_ActionDrawCircleTan2</name>
    <message>
        <source>Specify the first line/arc/circle</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Cancel</source>
        <translation type="unfinished">Anuluj</translation>
    </message>
    <message>
        <source>Specify the second line/arc/circle</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Back</source>
        <translation type="unfinished">Wstecz</translation>
    </message>
    <message>
        <source>Select the center of the tangent circle</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Invalid expression &apos;%1&apos; for radius</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Invalid negative radius &apos;%1&apos;</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Invalid zero radius &apos;%1&apos;</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>No tangent circle possible for radius &apos;%1&apos;</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>No common tangential circle for radius &apos;%1&apos;</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>RS_ActionDrawCircleTan2_1P</name>
    <message>
        <source>Specify a line/arc/circle</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Cancel</source>
        <translation type="unfinished">Anuluj</translation>
    </message>
    <message>
        <source>Specify the another arc/circle</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Back</source>
        <translation type="unfinished">Wstecz</translation>
    </message>
    <message>
        <source>Specify a point on the tangent circle</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Select the center of the tangent circle</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>RS_ActionDrawCircleTan3</name>
    <message>
        <source>Cancel</source>
        <translation type="unfinished">Anuluj</translation>
    </message>
    <message>
        <source>Back</source>
        <translation type="unfinished">Wstecz</translation>
    </message>
    <message>
        <source>Select the center of the tangent circle</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Specify the first line/arc/circle</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Specify the second line/arc/circle</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Specify the third line/arc/circle</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>RS_ActionDrawEllipse4Points</name>
    <message>
        <source>Specify the first point on ellipse</source>
        <translation>Zdefiniuj pierwszy punkt na elipsie</translation>
    </message>
    <message>
        <source>Cancel</source>
        <translation>Anuluj</translation>
    </message>
    <message>
        <source>Specify the second point on ellipse</source>
        <translation>Zdefiniuj drugi punkt na elipsie</translation>
    </message>
    <message>
        <source>Back</source>
        <translation>Wstecz</translation>
    </message>
    <message>
        <source>Specify the third point on ellipse</source>
        <translation>Zdefiniuj trzeci punkt na elipsie</translation>
    </message>
    <message>
        <source>Specify the fourth point on ellipse</source>
        <translation>Zdefiniuj czwarty punkt na elipsie</translation>
    </message>
    <message>
        <source>Can not determine uniquely an ellipse</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>RS_ActionDrawEllipseAxis</name>
    <message>
        <source>Not a valid expression</source>
        <translation>Nieprawidłowe wyrażenie</translation>
    </message>
    <message>
        <source>Specify ellipse center</source>
        <translation>Wskaż środek elipsy</translation>
    </message>
    <message>
        <source>Cancel</source>
        <translation>Anuluj</translation>
    </message>
    <message>
        <source>Specify endpoint of major axis</source>
        <translation>Wskaż punkt końcowy osi nadrzędnej</translation>
    </message>
    <message>
        <source>Back</source>
        <translation>Wstecz</translation>
    </message>
    <message>
        <source>Specify endpoint or length of minor axis:</source>
        <translation>Wskaż punkt końcowy osi podrzędnej:</translation>
    </message>
    <message>
        <source>Specify start angle</source>
        <translation>Wskaż kąt startowy</translation>
    </message>
    <message>
        <source>Specify end angle</source>
        <translation>Wskaż kąt końcowy</translation>
    </message>
</context>
<context>
    <name>RS_ActionDrawEllipseCenter3Points</name>
    <message>
        <source>Specify the center of ellipse</source>
        <translation>Zdefiniuj punkt środkowy elipsy</translation>
    </message>
    <message>
        <source>Cancel</source>
        <translation>Anuluj</translation>
    </message>
    <message>
        <source>Specify the first point on ellipse</source>
        <translation>Zdefiniuj pierwszy punkt na elipsie</translation>
    </message>
    <message>
        <source>Specify the second point on ellipse</source>
        <translation>Zdefiniuj drugi punkt na elipsie</translation>
    </message>
    <message>
        <source>Back</source>
        <translation>Wstecz</translation>
    </message>
    <message>
        <source>Specify the third point on ellipse</source>
        <translation>Zdefiniuj trzeci punkt na elipsie</translation>
    </message>
</context>
<context>
    <name>RS_ActionDrawEllipseFociPoint</name>
    <message>
        <source>Not a valid expression</source>
        <translation>Nieprawidłowe wyrażenie</translation>
    </message>
    <message>
        <source>Specify first focus of ellipse</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Cancel</source>
        <translation>Anuluj</translation>
    </message>
    <message>
        <source>Specify second focus of ellipse</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Back</source>
        <translation>Wstecz</translation>
    </message>
    <message>
        <source>Specify a point on ellipse or total distance to foci</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>specify a point on ellipse, or total distance to foci</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Total distance %1 is smaller than distance between foci</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>RS_ActionDrawEllipseInscribe</name>
    <message>
        <source>Specify the first line</source>
        <translation>Zdefiniuj pierwszą linię</translation>
    </message>
    <message>
        <source>Cancel</source>
        <translation>Anuluj</translation>
    </message>
    <message>
        <source>Specify the second line</source>
        <translation>Zdefiniuj drugą linię</translation>
    </message>
    <message>
        <source>Back</source>
        <translation>Wstecz</translation>
    </message>
    <message>
        <source>Specify the third line</source>
        <translation>Zdefiniuj trzecią linię</translation>
    </message>
    <message>
        <source>Specify the fourth line</source>
        <translation>Zdefiniuj czwartą linię</translation>
    </message>
    <message>
        <source>Can not determine uniquely an ellipse</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>RS_ActionDrawHatch</name>
    <message>
        <source>Invalid hatch area. Please check that the entities chosen form one or more closed contours.</source>
        <translation>Niepoprawny obszar kreskowania. Proszę wskazać obiekty, które tworzą jeden lub więcej zamkniętych konturów.</translation>
    </message>
    <message>
        <source>Hatch created successfully.</source>
        <translation>Kreskowanie utworzone pomyślnie.</translation>
    </message>
    <message>
        <source>Hatch Error: Invalid contour found!</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Hatch Error: Pattern not found!</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Hatch Error: Contour or pattern too small!</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Hatch Error: Contour too big!</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Hatch Error: Undefined Error!</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Total hatch area = %1</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>RS_ActionDrawImage</name>
    <message>
        <source>Not a valid expression</source>
        <translation>Nieprawidłowe wyrażenie</translation>
    </message>
    <message>
        <source>Specify reference point</source>
        <translation>Wskaż punkt odniesienia</translation>
    </message>
    <message>
        <source>Cancel</source>
        <translation>Anuluj</translation>
    </message>
    <message>
        <source>Enter angle:</source>
        <translation>Wprowadź kąt:</translation>
    </message>
    <message>
        <source>Enter factor:</source>
        <translation>Wprowadź współczynnik:</translation>
    </message>
    <message>
        <source></source>
        <translation></translation>
    </message>
    <message>
        <source>Enter dpi:</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>RS_ActionDrawLine</name>
    <message>
        <source>Specify first point</source>
        <translation>Wskaż pierwszy punkt</translation>
    </message>
    <message>
        <source>Cancel</source>
        <translation>Anuluj</translation>
    </message>
    <message>
        <source>Specify next point or [%1]</source>
        <translation>Wskaż pierwszy punkt lub [%1]</translation>
    </message>
    <message>
        <source>Back</source>
        <translation>Wstecz</translation>
    </message>
    <message>
        <source>Specify next point</source>
        <translation>Wskaż następny punkt</translation>
    </message>
    <message>
        <source>Cannot close sequence of lines: Not enough entities defined yet, or already closed.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Cannot undo: Begin of history reached</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Cannot redo: End of history reached</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>RS_ActionDrawLineAngle</name>
    <message>
        <source>Not a valid expression</source>
        <translation>Nieprawidłowe wyrażenie</translation>
    </message>
    <message>
        <source>Specify position</source>
        <translation>Wskaż pozycję</translation>
    </message>
    <message>
        <source>Cancel</source>
        <translation>Anuluj</translation>
    </message>
    <message>
        <source>Enter angle:</source>
        <translation>Wprowadź kąt:</translation>
    </message>
    <message>
        <source>Back</source>
        <translation>Wstecz</translation>
    </message>
    <message>
        <source>Enter length:</source>
        <translation>Wprowadź długość:</translation>
    </message>
</context>
<context>
    <name>RS_ActionDrawLineBisector</name>
    <message>
        <source>Not a valid expression</source>
        <translation>Nieprawidłowe wyrażenie</translation>
    </message>
    <message>
        <source>Select first line</source>
        <translation>Zaznacz pierwszą linię</translation>
    </message>
    <message>
        <source>Cancel</source>
        <translation>Anuluj</translation>
    </message>
    <message>
        <source>Select second line</source>
        <translation>Zaznacz drugą linię</translation>
    </message>
    <message>
        <source>Back</source>
        <translation>Wstecz</translation>
    </message>
    <message>
        <source>Enter bisector length:</source>
        <translation>Wprowadź długość dwusiecznej:</translation>
    </message>
    <message>
        <source>Enter number of bisectors:</source>
        <translation>Wprowadź ilość dwusiecznych:</translation>
    </message>
    <message>
        <source>Number sector lines not in range: </source>
        <comment>number of bisector to create must be in [1, 200]</comment>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>RS_ActionDrawLineFree</name>
    <message>
        <source>Click and drag to draw a line</source>
        <translation>Kliknij i przeciągnij aby narysować linię</translation>
    </message>
    <message>
        <source>Cancel</source>
        <translation>Anuluj</translation>
    </message>
</context>
<context>
    <name>RS_ActionDrawLineHorVert</name>
    <message>
        <source>Specify first point</source>
        <translation>Wskaż pierwszy punkt</translation>
    </message>
    <message>
        <source>Cancel</source>
        <translation>Anuluj</translation>
    </message>
    <message>
        <source>Specify second point</source>
        <translation>Wskaż drugi punkt</translation>
    </message>
    <message>
        <source>Back</source>
        <translation>Wstecz</translation>
    </message>
</context>
<context>
    <name>RS_ActionDrawLineOrthTan</name>
    <message>
        <source>Select a line</source>
        <translation>Zaznacz linię</translation>
    </message>
    <message>
        <source>Cancel</source>
        <translation>Anuluj</translation>
    </message>
    <message>
        <source>Select circle, arc or ellipse</source>
        <translation>Zaznacz okrąg, łuk lub elipsę</translation>
    </message>
    <message>
        <source>Back</source>
        <translation>Wstecz</translation>
    </message>
</context>
<context>
    <name>RS_ActionDrawLineParallel</name>
    <message>
        <source>Cancel</source>
        <translation>Anuluj</translation>
    </message>
    <message>
        <source>Enter number:</source>
        <translation>Wprowadź liczbę:</translation>
    </message>
    <message>
        <source>Not a valid expression</source>
        <translation>Nieprawidłowe wyrażenie</translation>
    </message>
    <message>
        <source>Not a valid number. Try 1..99</source>
        <translation>Nieprawidłowa liczba. Spróbuj 1..99</translation>
    </message>
    <message>
        <source>Specify Distance &lt;%1&gt; or select entity or [%2]</source>
        <translation>Wprowadź odległość &lt;%1&gt; lub zaznacz obiekt lub [%2]</translation>
    </message>
</context>
<context>
    <name>RS_ActionDrawLineParallelThrough</name>
    <message>
        <source>Select entity</source>
        <translation>Zaznacz obiekt</translation>
    </message>
    <message>
        <source>Cancel</source>
        <translation>Anuluj</translation>
    </message>
    <message>
        <source>Specify through point</source>
        <translation>Wskaż punkt &quot;poprzez&quot;</translation>
    </message>
    <message>
        <source>Back</source>
        <translation>Wstecz</translation>
    </message>
    <message>
        <source>Number:</source>
        <translation>Liczba:</translation>
    </message>
    <message>
        <source>Not a valid number. Try 1..99</source>
        <translation>Nieprawidłowa liczba. Spróbuj 1..99</translation>
    </message>
    <message>
        <source>Not a valid expression</source>
        <translation>Nieprawidłowe wyrażenie</translation>
    </message>
</context>
<context>
    <name>RS_ActionDrawLinePolygon</name>
    <message>
        <source></source>
        <translation></translation>
    </message>
</context>
<context>
    <name>RS_ActionDrawLinePolygonCenCor</name>
    <message>
        <source>Specify center</source>
        <translation>Wskaż środek</translation>
    </message>
    <message>
        <source>Specify a corner</source>
        <translation>Wskaż wierzchołek</translation>
    </message>
    <message>
        <source>Enter number:</source>
        <translation>Wprowadź liczbę:</translation>
    </message>
    <message>
        <source>Not a valid number. Try 1..9999</source>
        <translation>Nieprawidłowa liczba. Spróbuj 1..9999</translation>
    </message>
    <message>
        <source>Not a valid expression</source>
        <translation>Nieprawidłowe wyrażenie</translation>
    </message>
</context>
<context>
    <name>RS_ActionDrawLinePolygonCorCor</name>
    <message>
        <source>Specify first corner</source>
        <translation>Wskaż pierwszy wierzchołek</translation>
    </message>
    <message>
        <source>Cancel</source>
        <translation>Anuluj</translation>
    </message>
    <message>
        <source>Specify second corner</source>
        <translation>Wskaż drugi wierzchołek</translation>
    </message>
    <message>
        <source>Back</source>
        <translation>Wstecz</translation>
    </message>
    <message>
        <source>Number:</source>
        <translation>Liczba:</translation>
    </message>
    <message>
        <source>Not a valid number. Try 1..9999</source>
        <translation>Nieprawidłowa liczba. Spróbuj 1..9999</translation>
    </message>
    <message>
        <source>Not a valid expression.</source>
        <translation>Nieprawidłowe wyrażenie.</translation>
    </message>
</context>
<context>
    <name>RS_ActionDrawLineRectangle</name>
    <message>
        <source>Specify first corner</source>
        <translation>Wskaż pierwszy wierzchołek</translation>
    </message>
    <message>
        <source>Cancel</source>
        <translation>Anuluj</translation>
    </message>
    <message>
        <source>Specify second corner</source>
        <translation>Wskaż drugi wierzchołek</translation>
    </message>
    <message>
        <source>Back</source>
        <translation>Wstecz</translation>
    </message>
</context>
<context>
    <name>RS_ActionDrawLineRelAngle</name>
    <message>
        <source>Not a valid expression</source>
        <translation>Nieprawidłowe wyrażenie</translation>
    </message>
    <message>
        <source>Select base entity</source>
        <translation>Zaznacz obiekt podstawowy</translation>
    </message>
    <message>
        <source>Cancel</source>
        <translation>Anuluj</translation>
    </message>
    <message>
        <source>Specify position</source>
        <translation>Wskaż pozycje</translation>
    </message>
    <message>
        <source>Back</source>
        <translation>Wstecz</translation>
    </message>
</context>
<context>
    <name>RS_ActionDrawLineTangent1</name>
    <message>
        <source>Specify point</source>
        <translation>Wskaż punkt</translation>
    </message>
    <message>
        <source>Cancel</source>
        <translation>Anuluj</translation>
    </message>
    <message>
        <source>Back</source>
        <translation>Wstecz</translation>
    </message>
    <message>
        <source>Select circle, arc or ellipse</source>
        <translation>Zaznacz obiekt typu łuk lub okrąg</translation>
    </message>
</context>
<context>
    <name>RS_ActionDrawLineTangent2</name>
    <message>
        <source>Cancel</source>
        <translation>Anuluj</translation>
    </message>
    <message>
        <source>Back</source>
        <translation>Wstecz</translation>
    </message>
    <message>
        <source>Select first circle or ellipse</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Select second circle or ellipse</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>RS_ActionDrawMText</name>
    <message>
        <source>Specify insertion point</source>
        <translation type="unfinished">Wskaż punkt wstawiania</translation>
    </message>
    <message>
        <source>Cancel</source>
        <translation type="unfinished">Anuluj</translation>
    </message>
    <message>
        <source>Enter text:</source>
        <translation type="unfinished">Wprowadź tekst:</translation>
    </message>
    <message>
        <source>Back</source>
        <translation type="unfinished">Wstecz</translation>
    </message>
</context>
<context>
    <name>RS_ActionDrawPoint</name>
    <message>
        <source>Specify location</source>
        <translation>Wskaż położenie</translation>
    </message>
    <message>
        <source>Cancel</source>
        <translation>Anuluj</translation>
    </message>
</context>
<context>
    <name>RS_ActionDrawPolyline</name>
    <message>
        <source>Specify first point</source>
        <translation>Wskaż pierwszy punkt</translation>
    </message>
    <message>
        <source>Cancel</source>
        <translation>Anuluj</translation>
    </message>
    <message>
        <source>Specify next point or [%1]</source>
        <translation>Wskaż następny punkt lub [%1]</translation>
    </message>
    <message>
        <source>Back</source>
        <translation>Wstecz</translation>
    </message>
    <message>
        <source>Specify next point</source>
        <translation>Wskaż następny punkt</translation>
    </message>
    <message>
        <source>Cannot close sequence of lines: Not enough entities defined yet.</source>
        <translation>Nie można zamknąć sekwencji linii: niewystarczająca liczba zdefiniowanych obiektów.</translation>
    </message>
    <message>
        <source>Cannot undo: Not enough entities defined yet.</source>
        <translation>Nie można cofnąć: niewystarczająca liczba zdefiniowanych obiektów.</translation>
    </message>
    <message>
        <source>Enter the end point x</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Enter number of polylines</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>equation</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Enter an equation, f(x)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>x</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Enter the start point x</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>The entered x is invalid.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>The step size entered is invalid.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>The value x entered is invalid.</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>RS_ActionDrawSpline</name>
    <message>
        <source>Specify first control point</source>
        <translation>Wskaż pierwszy punkt kontrolny</translation>
    </message>
    <message>
        <source>Cancel</source>
        <translation>Anuluj</translation>
    </message>
    <message>
        <source>Specify next control point or [%1]</source>
        <translation>Wskaż następny punkt kontrolny lub [%1]</translation>
    </message>
    <message>
        <source>Back</source>
        <translation>Wstecz</translation>
    </message>
    <message>
        <source>Specify next control point</source>
        <translation>Wskaż następny punkt kontrolny</translation>
    </message>
    <message>
        <source>Cannot undo: Not enough entities defined yet.</source>
        <translation>Nie można cofnąć: Niewystarczająca liczba zdefiniowanych obiektów.</translation>
    </message>
</context>
<context>
    <name>RS_ActionDrawText</name>
    <message>
        <source>Specify insertion point</source>
        <translation>Wskaż punkt wstawiania</translation>
    </message>
    <message>
        <source>Cancel</source>
        <translation>Anuluj</translation>
    </message>
    <message>
        <source>Enter text:</source>
        <translation>Wprowadź tekst:</translation>
    </message>
    <message>
        <source>Back</source>
        <translation>Wstecz</translation>
    </message>
    <message>
        <source>Specify second point</source>
        <translation type="unfinished">Wskaż drugi punkt</translation>
    </message>
</context>
<context>
    <name>RS_ActionEditCopy</name>
    <message>
        <source>Specify reference point</source>
        <translation>Wskaż punkt odniesienia</translation>
    </message>
    <message>
        <source>Cancel</source>
        <translation>Anuluj</translation>
    </message>
</context>
<context>
    <name>RS_ActionEditPaste</name>
    <message>
        <source>Set reference point</source>
        <translation>Zmień punkt odniesienia</translation>
    </message>
    <message>
        <source>Cancel</source>
        <translation>Anuluj</translation>
    </message>
</context>
<context>
    <name>RS_ActionEditUndo</name>
    <message>
        <source>Nothing to undo!</source>
        <translation>Nie ma czego cofnąć!</translation>
    </message>
    <message>
        <source>Nothing to redo!</source>
        <translation>Nie ma czego powtórzyć!</translation>
    </message>
</context>
<context>
    <name>RS_ActionInfoAngle</name>
    <message>
        <source>Lines are parallel</source>
        <translation>Linie są równoległe</translation>
    </message>
    <message>
        <source>Specify first line</source>
        <translation>Wskaż pierwszą linie</translation>
    </message>
    <message>
        <source>Cancel</source>
        <translation>Anuluj</translation>
    </message>
    <message>
        <source>Specify second line</source>
        <translation>Wskaż drugą linie</translation>
    </message>
    <message>
        <source>Back</source>
        <translation>Wstecz</translation>
    </message>
    <message>
        <source>Angle: %1</source>
        <translation>Kąt: %1</translation>
    </message>
</context>
<context>
    <name>RS_ActionInfoArea</name>
    <message>
        <source>Circumference: %1</source>
        <translation>Obwód: %1</translation>
    </message>
    <message>
        <source>Point: %1/%2</source>
        <translation>Punkt: %1/%2</translation>
    </message>
    <message>
        <source>Specify first point of polygon</source>
        <translation>Wskaż pierwszy punkt wieloboku</translation>
    </message>
    <message>
        <source>Cancel</source>
        <translation>Anuluj</translation>
    </message>
    <message>
        <source>Specify next point of polygon</source>
        <translation>Wskaż następny punkt wieloboku</translation>
    </message>
    <message>
        <source>Closing Point: %1/%2</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Area: %1 %2^2</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>RS_ActionInfoDist</name>
    <message>
        <source>Specify first point of distance</source>
        <translation>Wskaż pierwszy punkt odległości</translation>
    </message>
    <message>
        <source>Cancel</source>
        <translation>Anuluj</translation>
    </message>
    <message>
        <source>Specify second point of distance</source>
        <translation>Wskaż dugi punkt odległości</translation>
    </message>
    <message>
        <source>Back</source>
        <translation>Wstecz</translation>
    </message>
    <message>
        <source>Distance: %1 Cartesian: (%2 , %3), Polar: (%4&lt;%5)</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>RS_ActionInfoDist2</name>
    <message>
        <source>Distance: %1</source>
        <translation>Odległość: %1</translation>
    </message>
    <message>
        <source>Specify entity</source>
        <translation>Wprowadź obiekt</translation>
    </message>
    <message>
        <source>Cancel</source>
        <translation>Anuluj</translation>
    </message>
    <message>
        <source>Specify point</source>
        <translation>Wskaż punkt</translation>
    </message>
    <message>
        <source>Back</source>
        <translation>Wstecz</translation>
    </message>
</context>
<context>
    <name>RS_ActionInfoInside</name>
    <message>
        <source>Point is inside selected contour.</source>
        <translation>Punkt jest wewnątrz zaznaczonego konturu.</translation>
    </message>
    <message>
        <source>Point is outside selected contour.</source>
        <translation>Punkt jest poza zaznaczonym konturem.</translation>
    </message>
    <message>
        <source>Specify point</source>
        <translation>Wskaż punkt</translation>
    </message>
    <message>
        <source>Cancel</source>
        <translation>Anuluj</translation>
    </message>
</context>
<context>
    <name>RS_ActionInfoTotalLength</name>
    <message>
        <source>Total Length of selected entities: %1</source>
        <translation>Całkowita długość zaznaczonych obiektów: %1</translation>
    </message>
    <message>
        <source>At least one of the selected entities cannot be measured.</source>
        <translation>Co najmniej jeden z zaznaczonych obiektów nie może być zmierzony.</translation>
    </message>
</context>
<context>
    <name>RS_ActionLibraryInsert</name>
    <message>
        <source>Not a valid expression</source>
        <translation>Nieprawidłowe wyrażenie</translation>
    </message>
    <message>
        <source>Specify reference point</source>
        <translation>Wskaż punkt odniesienia</translation>
    </message>
    <message>
        <source>Cancel</source>
        <translation>Anuluj</translation>
    </message>
    <message>
        <source>Enter angle:</source>
        <translation>Wprowadź kąt:</translation>
    </message>
    <message>
        <source>Enter factor:</source>
        <translation>Wprowadź współczynnik:</translation>
    </message>
    <message>
        <source>Insert Library Object</source>
        <translation>Wstaw obiekt z biblioteki</translation>
    </message>
    <message>
        <source></source>
        <translation></translation>
    </message>
    <message>
        <source>Cannot open file &apos;%1&apos;</source>
        <translation>Nie można otworzyć pliku &apos;%1&apos;</translation>
    </message>
</context>
<context>
    <name>RS_ActionLockRelativeZero</name>
    <message>
        <source>(Un-)&amp;Lock Relative Zero</source>
        <translation>(Od/Za)&amp;blokuj zero względne</translation>
    </message>
</context>
<context>
    <name>RS_ActionModifyBevel</name>
    <message>
        <source>Not a valid expression</source>
        <translation>Nieprawidłowe wyrażenie</translation>
    </message>
    <message>
        <source>Select first entity</source>
        <translation>Zaznacz pierwszy obiekt</translation>
    </message>
    <message>
        <source>Cancel</source>
        <translation>Anuluj</translation>
    </message>
    <message>
        <source>Select second entity</source>
        <translation>Zaznacz drugi obiekt</translation>
    </message>
    <message>
        <source>Back</source>
        <translation>Wstecz</translation>
    </message>
    <message>
        <source>Enter length 1:</source>
        <translation>Wprowadź długość 1:</translation>
    </message>
    <message>
        <source>Enter length 2:</source>
        <translation>Wprowadź długość 2:</translation>
    </message>
</context>
<context>
    <name>RS_ActionModifyCut</name>
    <message>
        <source>No Entity found.</source>
        <translation>Nieznaleziono obiektu.</translation>
    </message>
    <message>
        <source>Specify entity to cut</source>
        <translation>Wskaż obiekt do cięcia</translation>
    </message>
    <message>
        <source>Cancel</source>
        <translation>Anuluj</translation>
    </message>
    <message>
        <source>Specify cutting point</source>
        <translation>Wskaż punkt cięcia</translation>
    </message>
    <message>
        <source>Back</source>
        <translation>Wstecz</translation>
    </message>
    <message>
        <source>Cutting point is invalid.</source>
        <translation>Punkt cięcia jest niepoprawny.</translation>
    </message>
    <message>
        <source>Cutting point is not on entity.</source>
        <translation>Punkt cięcia nie jest na obiekcie.</translation>
    </message>
    <message>
        <source>Entity must be a line, arc, circle, ellipse or interpolation spline.</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>RS_ActionModifyDeleteFree</name>
    <message>
        <source>Specify first break point on a polyline</source>
        <translation>Wskaż pierwszy punkt łamania na linii łamanej</translation>
    </message>
    <message>
        <source>Cancel</source>
        <translation>Anuluj</translation>
    </message>
    <message>
        <source>Specify second break point on the same polyline</source>
        <translation>Wskaż drugi punkt łamania na tej samej linii łamanej</translation>
    </message>
    <message>
        <source>Back</source>
        <translation>Wstecz</translation>
    </message>
    <message>
        <source>Entities not in the same polyline.</source>
        <translation>Obiekty nie leżą na tej samej łamanej.</translation>
    </message>
    <message>
        <source>Parent of second entity is not a polyline</source>
        <translation>Nadrzędny względem drugiego obiektu nie jest linią łamaną</translation>
    </message>
    <message>
        <source>Parent of first entity is not a polyline</source>
        <translation>Nadrzędny względem pierwszego obiektu nie jest linią łamaną</translation>
    </message>
    <message>
        <source>Parent of second entity is nullptr</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>One of the chosen entities is nullptr</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Parent of first entity is nullptr</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>First entity is nullptr</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Second entity is nullptr</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>RS_ActionModifyDeleteQuick</name>
    <message>
        <source>Pick entity to delete</source>
        <translation>Wybierz obiekt do usunięcia</translation>
    </message>
    <message>
        <source>Cancel</source>
        <translation>Anuluj</translation>
    </message>
</context>
<context>
    <name>RS_ActionModifyEntity</name>
    <message>
        <source>Click on entity to modify</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Cancel</source>
        <translation type="unfinished">Anuluj</translation>
    </message>
</context>
<context>
    <name>RS_ActionModifyMirror</name>
    <message>
        <source>Specify first point of mirror line</source>
        <translation>Wskaż pierwszy punkt linii odbicia</translation>
    </message>
    <message>
        <source>Cancel</source>
        <translation>Anuluj</translation>
    </message>
    <message>
        <source>Specify second point of mirror line</source>
        <translation>Wskaż drugi punkt linii odbicia</translation>
    </message>
    <message>
        <source>Back</source>
        <translation>Wstecz</translation>
    </message>
</context>
<context>
    <name>RS_ActionModifyMove</name>
    <message>
        <source>Specify reference point</source>
        <translation>Wskaż punkt odniesienia</translation>
    </message>
    <message>
        <source>Cancel</source>
        <translation>Anuluj</translation>
    </message>
    <message>
        <source>Specify target point</source>
        <translation>Wskaż punkt docelowy</translation>
    </message>
    <message>
        <source>Back</source>
        <translation>Wstecz</translation>
    </message>
    <message>
        <source>Invalid number of copies, use %1 </source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>RS_ActionModifyMoveRotate</name>
    <message>
        <source>Not a valid expression</source>
        <translation>Nieprawidłowe wyrażenie</translation>
    </message>
    <message>
        <source>Specify reference point</source>
        <translation>Wskaż punkt odniesienia</translation>
    </message>
    <message>
        <source>Cancel</source>
        <translation>Anuluj</translation>
    </message>
    <message>
        <source>Specify target point</source>
        <translation>Wskaż punkt docelowy</translation>
    </message>
    <message>
        <source>Back</source>
        <translation>Wstecz</translation>
    </message>
    <message>
        <source>Enter rotation angle:</source>
        <translation>Wprowadź kąt obrotu:</translation>
    </message>
</context>
<context>
    <name>RS_ActionModifyOffset</name>
    <message>
        <source>Specify direction of offset</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Back</source>
        <translation>Wstecz</translation>
    </message>
</context>
<context>
    <name>RS_ActionModifyRotate</name>
    <message>
        <source>Specify reference point</source>
        <translation>Wskaż punkt odniesienia</translation>
    </message>
    <message>
        <source>Back</source>
        <translation>Wstecz</translation>
    </message>
    <message>
        <source>Specify rotation center</source>
        <translation>Zdefiniuj punkt środkowy obrotu</translation>
    </message>
    <message>
        <source>Specify target point to rotate to</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>RS_ActionModifyRotate2</name>
    <message>
        <source>Specify absolute reference point</source>
        <translation>Wskaż bezwzględny punkt odniesienia</translation>
    </message>
    <message>
        <source>Cancel</source>
        <translation>Anuluj</translation>
    </message>
    <message>
        <source>Specify relative reference point</source>
        <translation>Wskaż względny punkt odniesienia</translation>
    </message>
    <message>
        <source>Back</source>
        <translation>Wstecz</translation>
    </message>
</context>
<context>
    <name>RS_ActionModifyRound</name>
    <message>
        <source>Not a valid expression</source>
        <translation>Nieprawidłowe wyrażenie</translation>
    </message>
    <message>
        <source>Back</source>
        <translation>Wstecz</translation>
    </message>
    <message>
        <source>Specify second entity</source>
        <translation>Wskaż drugi obiekt</translation>
    </message>
    <message>
        <source>Enter radius:</source>
        <translation>Wprowadź promień:</translation>
    </message>
    <message>
        <source>Cancel</source>
        <translation>Anuluj</translation>
    </message>
    <message>
        <source>Specify first entity or enter radius &lt;%1&gt;</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>RS_ActionModifyScale</name>
    <message>
        <source>Specify reference point</source>
        <translation>Wskaż punkt odniesienia</translation>
    </message>
    <message>
        <source>Cancel</source>
        <translation>Anuluj</translation>
    </message>
</context>
<context>
    <name>RS_ActionModifyStretch</name>
    <message>
        <source>Specify first corner</source>
        <translation>Wskaż pierwszy wierzchołek</translation>
    </message>
    <message>
        <source>Cancel</source>
        <translation>Anuluj</translation>
    </message>
    <message>
        <source>Specify second corner</source>
        <translation>Wskaż drugi wierzchołek</translation>
    </message>
    <message>
        <source>Back</source>
        <translation>Wstecz</translation>
    </message>
    <message>
        <source>Specify reference point</source>
        <translation>Wskaż punkt odniesienia</translation>
    </message>
    <message>
        <source>Specify target point</source>
        <translation>Wskaż punkt docelowy</translation>
    </message>
</context>
<context>
    <name>RS_ActionModifyTrim</name>
    <message>
        <source>Select first trim entity</source>
        <translation>Zaznacz pierwszy obiekt do przycięcia</translation>
    </message>
    <message>
        <source>Cancel</source>
        <translation>Anuluj</translation>
    </message>
    <message>
        <source>Select limiting entity</source>
        <translation>Zaznacz obiekt ograniczający</translation>
    </message>
    <message>
        <source>Back</source>
        <translation>Wstecz</translation>
    </message>
    <message>
        <source>Select second trim entity</source>
        <translation>Zaznacz drugi obiekt do przycięcia</translation>
    </message>
    <message>
        <source>Select entity to trim</source>
        <translation>Zaznacz obiekt do przycięcia</translation>
    </message>
</context>
<context>
    <name>RS_ActionModifyTrimAmount</name>
    <message>
        <source>No entity found. </source>
        <translation>Nie znaleziono obiektu. </translation>
    </message>
    <message>
        <source>The chosen Entity is in a block. Please edit the block.</source>
        <translation>Wybrany obiekt jest w bloku. Proszę wyedytować blok.</translation>
    </message>
    <message>
        <source>The chosen Entity is not an atomic entity or cannot be trimmed.</source>
        <translation>Wybrany obiekt nie jest pojedynczym obiektem lub nie można zastosować wyrównana.</translation>
    </message>
    <message>
        <source>Not a valid expression</source>
        <translation>Nieprawidłowe wyrażenie</translation>
    </message>
    <message>
        <source>Select entity to trim or enter distance:</source>
        <translation>Zaznacz obiekt do przycięcia lub wprowadź odległość:</translation>
    </message>
    <message>
        <source>Back</source>
        <translation>Wstecz</translation>
    </message>
</context>
<context>
    <name>RS_ActionOrder</name>
    <message>
        <source>No Entity found.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Choose entity for order</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Cancel</source>
        <translation type="unfinished">Anuluj</translation>
    </message>
</context>
<context>
    <name>RS_ActionPolylineAdd</name>
    <message>
        <source>Cancel</source>
        <translation>Anuluj</translation>
    </message>
    <message>
        <source>Back</source>
        <translation>Wstecz</translation>
    </message>
    <message>
        <source>No Entity found.</source>
        <translation>Nie znaleziono obiektu.</translation>
    </message>
    <message>
        <source>Entity must be a polyline.</source>
        <translation>Obiekt musi być linią łamaną.</translation>
    </message>
    <message>
        <source>Adding point is invalid.</source>
        <translation>Dodany punkt jest nieprawidłowy.</translation>
    </message>
    <message>
        <source>Adding point is not on entity.</source>
        <translation>Dodany punkt nie leży na obiekcie.</translation>
    </message>
    <message>
        <source>Specify polyline to add nodes</source>
        <translation>Zaznacz linię łamaną, aby dodać wierzchołki</translation>
    </message>
    <message>
        <source>Specify adding node&apos;s point</source>
        <translation>Zdefiniuj punkt nowego wierzchołka</translation>
    </message>
</context>
<context>
    <name>RS_ActionPolylineAppend</name>
    <message>
        <source>Cancel</source>
        <translation>Anuluj</translation>
    </message>
    <message>
        <source>No Entity found.</source>
        <translation>Nie znaleziono obiektu.</translation>
    </message>
    <message>
        <source>Entity must be a polyline.</source>
        <translation>Obiekt musi być linia łamaną.</translation>
    </message>
    <message>
        <source>Click somewhere near the beginning or end of existing polyline.</source>
        <translation>Kliknij blisko początku lub końca istniejącej linii łamanej.</translation>
    </message>
    <message>
        <source>Specify the polyline somewhere near the beginning or end point</source>
        <translation>Wskaż początkowy lub końcowy punkt łamanej</translation>
    </message>
    <message>
        <source>Specify next point or [%1]</source>
        <translation>Wskaż następny punkt lub [%1]</translation>
    </message>
    <message>
        <source>Back</source>
        <translation>Wstecz</translation>
    </message>
    <message>
        <source>Specify next point</source>
        <translation>Wskaż następny punkt</translation>
    </message>
    <message>
        <source>Can not append nodes in a closed polyline.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Cannot undo: Not enough entities defined yet.</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>RS_ActionPolylineDel</name>
    <message>
        <source>Cancel</source>
        <translation>Anuluj</translation>
    </message>
    <message>
        <source>Back</source>
        <translation>Wstecz</translation>
    </message>
    <message>
        <source>No Entity found.</source>
        <translation>Nie znaleziono obiektu.</translation>
    </message>
    <message>
        <source>Entity must be a polyline.</source>
        <translation>Obiekt musi być linią łamaną.</translation>
    </message>
    <message>
        <source>Specify polyline to delete node</source>
        <translation>Określ linię łamaną, by usunąć wierzchołek</translation>
    </message>
    <message>
        <source>Specify deleting node&apos;s point</source>
        <translation>Zaznacz wierzchołek do usunięcia</translation>
    </message>
    <message>
        <source>Deleting point is invalid.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Deleting point is not on entity.</source>
        <translation type="unfinished">Usuwany punkt nie leży na obiekcie.</translation>
    </message>
</context>
<context>
    <name>RS_ActionPolylineDelBetween</name>
    <message>
        <source>Cancel</source>
        <translation>Anuluj</translation>
    </message>
    <message>
        <source>Back</source>
        <translation>Wstecz</translation>
    </message>
    <message>
        <source>No Entity found.</source>
        <translation>Nie znaleziono obiektu.</translation>
    </message>
    <message>
        <source>Entity must be a polyline.</source>
        <translation>Obiekt musi być linią łamaną.</translation>
    </message>
    <message>
        <source>Deleting point is not on entity.</source>
        <translation>Usuwany punkt nie leży na obiekcie.</translation>
    </message>
    <message>
        <source>Specify polyline to delete between two nodes</source>
        <translation>Wybierz linię łamaną, aby usunąć</translation>
    </message>
    <message>
        <source>Specify first node</source>
        <translation>Określ pierwszy wierzchołek</translation>
    </message>
    <message>
        <source>Specify second node</source>
        <translation>Określ drugi wierzchołek</translation>
    </message>
    <message>
        <source>Deleting point is invalid.</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>RS_ActionPolylineEquidistant</name>
    <message>
        <source>No Entity found.</source>
        <translation>Nie znaleziono obiektu.</translation>
    </message>
    <message>
        <source>Entity must be a polyline.</source>
        <translation>Obiekt musi być linią łamaną. </translation>
    </message>
    <message>
        <source>Choose the original polyline</source>
        <translation>Wskaż pierwotną łamaną</translation>
    </message>
    <message>
        <source>Cancel</source>
        <translation>Anuluj</translation>
    </message>
</context>
<context>
    <name>RS_ActionPolylineSegment</name>
    <message>
        <source>No Entity found.</source>
        <translation>Nie znaleziono obiektu.</translation>
    </message>
    <message>
        <source>Choose one of the segments on the original polyline</source>
        <translation>Wskaż odcinek pierwotnej łamanej</translation>
    </message>
    <message>
        <source>Cancel</source>
        <translation>Anuluj</translation>
    </message>
    <message>
        <source>Entity can not be a closed polyline.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Polyline created</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>RS_ActionPolylineTrim</name>
    <message>
        <source>Cancel</source>
        <translation>Anuluj</translation>
    </message>
    <message>
        <source>Back</source>
        <translation>Wstecz</translation>
    </message>
    <message>
        <source>No Entity found.</source>
        <translation>Nie znaleziono obiektu.</translation>
    </message>
    <message>
        <source>Entity must be a polyline.</source>
        <translation>Obiekt musi być linią łamaną.</translation>
    </message>
    <message>
        <source>Specifying point is invalid.</source>
        <translation>Wybrany punkt jest nieprawidłowy.</translation>
    </message>
    <message>
        <source>No Segment found on entity.</source>
        <translation>Nieprawidłowy odcinek</translation>
    </message>
    <message>
        <source>Specify polyline to trim</source>
        <translation>Wskaż łamaną do przycięcia</translation>
    </message>
    <message>
        <source>Specify first segment</source>
        <translation>Wskaż pierwszy odcinek</translation>
    </message>
    <message>
        <source>Specify second segment</source>
        <translation>Wskaż drugi odcinek</translation>
    </message>
</context>
<context>
    <name>RS_ActionPrintPreview</name>
    <message>
        <source>RS_ActionPrintPreview::fit(): Invalid paper size</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Printout offset in paper coordinates by (%1, %2)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Printout offset in graph coordinates by (%1, %2)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Printout offset in graph coordinates</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Printout offset in paper coordinates</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>: select printout offset coordinates</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>type in offset from command line to offset printout</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Printout offset ignores relative zero. Ignoring &apos;@&apos;</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Printout in Black/White</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Printout in color</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>RS_ActionPrintPreview::calcPagesNum(): Limit of pages has been exceeded.</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>RS_ActionSelect</name>
    <message>
        <source>Select to modify attributes</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Cancel</source>
        <translation>Anuluj</translation>
    </message>
    <message>
        <source>Select to delete</source>
        <translation>Zaznacz do usunięcia</translation>
    </message>
    <message>
        <source>Select to delete immediately</source>
        <translation>Zaznacz do natychmiastowego usunięcia</translation>
    </message>
    <message>
        <source>Select to move</source>
        <translation>Zaznacz do przeniesienia</translation>
    </message>
    <message>
        <source>Select to rotate</source>
        <translation>Zaznacz do obrócenia</translation>
    </message>
    <message>
        <source>Select to scale</source>
        <translation>Zaznacz do przeskalowania</translation>
    </message>
    <message>
        <source>Select to mirror</source>
        <translation>Zaznacz do odbicia</translation>
    </message>
    <message>
        <source>Select to move and rotate</source>
        <translation>Zaznacz do przesunięcia i obrócenia</translation>
    </message>
    <message>
        <source>Select for two axis rotation</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Select to explode text</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Select to create block</source>
        <translation>Zaznacz aby stworzyć blok</translation>
    </message>
    <message>
        <source>Select to copy</source>
        <translation>Zaznacz do skopiowania</translation>
    </message>
    <message>
        <source>Select to cut</source>
        <translation>Zaznacz do przycięcia</translation>
    </message>
    <message>
        <source>No entity selected!</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Select to create offset</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Select entities to order</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Select to explode block</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Select to revert direction</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>RS_ActionSelectContour</name>
    <message>
        <source>Entity must be an Atomic Entity.</source>
        <translation>Obiekt musi być pojedynczym obiektem.</translation>
    </message>
</context>
<context>
    <name>RS_ActionSelectIntersected</name>
    <message>
        <source>Cancel</source>
        <translation>Anuluj</translation>
    </message>
    <message>
        <source>Back</source>
        <translation>Wstecz</translation>
    </message>
    <message>
        <source>Choose first point of intersection line</source>
        <translation>Wybierz pierwszy punkt linii przecinającej</translation>
    </message>
    <message>
        <source>Choose second point of intersection line</source>
        <translation>Wybierz drugi punkt linii przecinającej</translation>
    </message>
</context>
<context>
    <name>RS_ActionSelectWindow</name>
    <message>
        <source>Cancel</source>
        <translation>Anuluj</translation>
    </message>
    <message>
        <source>Choose second edge</source>
        <translation>Wybierz drugą krawędź</translation>
    </message>
    <message>
        <source>Back</source>
        <translation>Wstecz</translation>
    </message>
    <message>
        <source>Click and drag for the selection window</source>
        <translation>Kliknij i przeciąg aby zaznaczyć okno</translation>
    </message>
</context>
<context>
    <name>RS_ActionSetRelativeZero</name>
    <message>
        <source>Set relative Zero</source>
        <translation>Zmień zero względne</translation>
    </message>
    <message>
        <source>Cancel</source>
        <translation>Anuluj</translation>
    </message>
    <message>
        <source>Set &amp;Relative Zero</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>RS_ActionSnapIntersectionManual</name>
    <message>
        <source>Select first entity</source>
        <translation>Zaznacz pierwszy obiekt</translation>
    </message>
    <message>
        <source>Back</source>
        <translation>Wstecz</translation>
    </message>
    <message>
        <source>Select second entity</source>
        <translation>Zaznacz drugi obiekt</translation>
    </message>
    <message>
        <source>I&amp;ntersection Manually</source>
        <translation>&amp;Przecięcia ręcznie</translation>
    </message>
</context>
<context>
    <name>RS_ActionToolRegenerateDimensions</name>
    <message>
        <source>Regenerated %1 dimension entities</source>
        <translation>Odtworzono obiekty wymiarowe (%1)</translation>
    </message>
    <message>
        <source>No dimension entities found</source>
        <translation>Nie znaleziono obiektów wymiarowych</translation>
    </message>
</context>
<context>
    <name>RS_ActionZoomPan</name>
    <message>
        <source>Click and drag to pan zoom</source>
        <translation>Kliknij i przeciąg aby zmienić widok</translation>
    </message>
    <message>
        <source>Cancel</source>
        <translation>Anuluj</translation>
    </message>
    <message>
        <source>Zoom panning</source>
        <translation>Zmiana widoku</translation>
    </message>
</context>
<context>
    <name>RS_ActionZoomWindow</name>
    <message>
        <source>Specify first edge</source>
        <translation>Wskaż pierwszą krawędź</translation>
    </message>
    <message>
        <source>Cancel</source>
        <translation>Anuluj</translation>
    </message>
    <message>
        <source>Specify second edge</source>
        <translation>Wskaż drugą krawędź</translation>
    </message>
    <message>
        <source>Back</source>
        <translation>Wstecz</translation>
    </message>
</context>
<context>
    <name>TextFileViewer</name>
    <message>
        <source>Frame</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>Ui_ArcOptions</name>
    <message>
        <source>Arc Options</source>
        <translation type="unfinished">Opcje łuku</translation>
    </message>
    <message>
        <source>Counterclockwise</source>
        <translation type="unfinished">Przeciwnie do ruchu wskazówek zegara</translation>
    </message>
    <message>
        <source>Clockwise</source>
        <translation type="unfinished">Zgodnie ze wskazówkami zegara</translation>
    </message>
</context>
<context>
    <name>Ui_ArcTangentialOptions</name>
    <message>
        <source>Tangential Arc Options</source>
        <translation type="unfinished">Opcje łuku stycznego</translation>
    </message>
    <message>
        <source>Radius of the tangential arc</source>
        <translation type="unfinished">Promień stycznego łuku</translation>
    </message>
    <message>
        <source>Total subtending angle of the tangential arc</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Radius</source>
        <extracomment>Draw Tangential Arc by the given radius</extracomment>
        <translation type="unfinished">Promień</translation>
    </message>
    <message>
        <source>Angle</source>
        <extracomment>Draw Tangential Arc by the given radius</extracomment>
        <translation type="unfinished">Kąt</translation>
    </message>
</context>
<context>
    <name>Ui_BevelOptions</name>
    <message>
        <source>Bevel Options</source>
        <translation type="unfinished">Opcje ścinania</translation>
    </message>
    <message>
        <source>Check to trim both entities to the bevel</source>
        <translation type="unfinished">Przytnij obydwa obiekty do ukosu</translation>
    </message>
    <message>
        <source>Trim</source>
        <translation type="unfinished">Przytnij</translation>
    </message>
    <message>
        <source>Length 1:</source>
        <translation type="unfinished">Długość 1:</translation>
    </message>
    <message>
        <source>Length 2:</source>
        <translation type="unfinished">Długość 2:</translation>
    </message>
</context>
<context>
    <name>Ui_CircleOptions</name>
    <message>
        <source>Circle Options</source>
        <translation type="unfinished">Opcje okręgu</translation>
    </message>
    <message>
        <source>Radius:</source>
        <translation type="unfinished">Promień:</translation>
    </message>
</context>
<context>
    <name>Ui_CircleTan2Options</name>
    <message>
        <source>Circle Tangential2 Options</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>&lt;html&gt;&lt;head/&gt;&lt;body&gt;&lt;p&gt;Radius of the tangential circle to draw&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Radius:</source>
        <translation type="unfinished">Promień:</translation>
    </message>
    <message>
        <source>Radius of tangential circle</source>
        <translation type="unfinished">Promień stycznego okręgu</translation>
    </message>
</context>
<context>
    <name>Ui_DimLinearOptions</name>
    <message>
        <source>Linear Dimension Options</source>
        <translation type="unfinished">Opcje wymiarowania liniowego</translation>
    </message>
    <message>
        <source>Angle:</source>
        <translation type="unfinished">Kąt:</translation>
    </message>
</context>
<context>
    <name>Ui_DimOptions</name>
    <message>
        <source>Dimension Options</source>
        <translation type="unfinished">Opcje wymiarowania</translation>
    </message>
    <message>
        <source>Label:</source>
        <translation type="unfinished">Etykieta:</translation>
    </message>
    <message>
        <source>⌀</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>°</source>
        <translation type="unfinished">°</translation>
    </message>
    <message>
        <source>±</source>
        <translation type="unfinished">±</translation>
    </message>
    <message>
        <source>π</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>×</source>
        <translation type="unfinished">×</translation>
    </message>
    <message>
        <source>÷</source>
        <translation type="unfinished">÷</translation>
    </message>
    <message>
        <source>...</source>
        <translation type="unfinished">...</translation>
    </message>
</context>
<context>
    <name>Ui_ImageOptions</name>
    <message>
        <source>Insert Options</source>
        <translation type="unfinished">Opcje wstawiania</translation>
    </message>
    <message>
        <source>Angle:</source>
        <translation type="unfinished">Kąt:</translation>
    </message>
    <message>
        <source>Rotation Angle</source>
        <translation type="unfinished">Kąt obracania</translation>
    </message>
    <message>
        <source>Factor:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Scale Factor</source>
        <translation type="unfinished">Wskaźnik powiększenia</translation>
    </message>
    <message>
        <source>DPI</source>
        <translation type="unfinished">DPI</translation>
    </message>
    <message>
        <source>DPI of Image</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>Ui_InsertOptions</name>
    <message>
        <source>Insert Options</source>
        <translation type="unfinished">Opcje wstawiania</translation>
    </message>
    <message>
        <source>Angle:</source>
        <translation type="unfinished">Kąt:</translation>
    </message>
    <message>
        <source>Rotation Angle</source>
        <translation type="unfinished">Kąt obracania</translation>
    </message>
    <message>
        <source>Factor:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Scale Factor</source>
        <translation type="unfinished">Wskaźnik powiększenia</translation>
    </message>
    <message>
        <source>Array:</source>
        <translation type="unfinished">Tablica:</translation>
    </message>
    <message>
        <source>Number of Columns</source>
        <translation type="unfinished">Liczba kolumn</translation>
    </message>
    <message>
        <source>Number of Rows</source>
        <translation type="unfinished">Liczba wierszy</translation>
    </message>
    <message>
        <source>Spacing:</source>
        <translation type="unfinished">Odstęp:</translation>
    </message>
    <message>
        <source>Column Spacing</source>
        <translation type="unfinished">Odstępy między kolumnami</translation>
    </message>
    <message>
        <source>Row Spacing</source>
        <translation type="unfinished">Odstępy między wierszami</translation>
    </message>
</context>
<context>
    <name>Ui_LibraryInsertOptions</name>
    <message>
        <source>Library Insert Options</source>
        <translation type="unfinished">Opcje wstawiania z biblioteki</translation>
    </message>
    <message>
        <source>Angle:</source>
        <translation type="unfinished">Kąt:</translation>
    </message>
    <message>
        <source>Rotation Angle</source>
        <translation type="unfinished">Kąt obracania</translation>
    </message>
    <message>
        <source>Factor:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Scale Factor</source>
        <translation type="unfinished">Wskaźnik powiększenia</translation>
    </message>
</context>
<context>
    <name>Ui_LineAngleOptions</name>
    <message>
        <source>Line Angle Options</source>
        <translation type="unfinished">Opcje kąta liniowego</translation>
    </message>
    <message>
        <source>Angle:</source>
        <translation type="unfinished">Kąt:</translation>
    </message>
    <message>
        <source>Line angle</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Length:</source>
        <translation type="unfinished">Długość:</translation>
    </message>
    <message>
        <source>Length of line</source>
        <translation type="unfinished">Długość linii</translation>
    </message>
    <message>
        <source>Snap Point:</source>
        <translation type="unfinished">Punkt przyciągania:</translation>
    </message>
    <message>
        <source>Start</source>
        <translation type="unfinished">Początek</translation>
    </message>
    <message>
        <source>Middle</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>End</source>
        <translation type="unfinished">Koniec</translation>
    </message>
</context>
<context>
    <name>Ui_LineBisectorOptions</name>
    <message>
        <source>Line Bisector Options</source>
        <translation type="unfinished">Opcje dwusiecznej</translation>
    </message>
    <message>
        <source>Length:</source>
        <translation type="unfinished">Długość:</translation>
    </message>
    <message>
        <source>Length of bisector</source>
        <translation type="unfinished">Długość dwusiecznej</translation>
    </message>
    <message>
        <source>Number:</source>
        <translation type="unfinished">Liczba:</translation>
    </message>
    <message>
        <source>Number of bisectors to create</source>
        <translation type="unfinished">Liczba dwusiecznych do stworzenia</translation>
    </message>
</context>
<context>
    <name>Ui_LineOptions</name>
    <message>
        <source>Line Options</source>
        <translation type="unfinished">Opcje linii</translation>
    </message>
    <message>
        <source>Form a closed contour from lines drawn</source>
        <translation type="unfinished">Z narysowanych linii zbuduj kontur zamknięty</translation>
    </message>
    <message>
        <source>Close</source>
        <translation type="unfinished">Zamknij</translation>
    </message>
    <message>
        <source>Undo the last line drawing</source>
        <translation type="unfinished">Cofnij ostatnią narysowaną linię</translation>
    </message>
    <message>
        <source>Undo</source>
        <translation type="unfinished">Cofnij</translation>
    </message>
    <message>
        <source>Redo the last line drawing</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Redo</source>
        <translation type="unfinished">Ponów</translation>
    </message>
</context>
<context>
    <name>Ui_LineParallelOptions</name>
    <message>
        <source>Line Parallel Options</source>
        <translation type="unfinished">Opcje linii równoległej</translation>
    </message>
    <message>
        <source>Distance:</source>
        <translation type="unfinished">Odległość:</translation>
    </message>
    <message>
        <source>Distance to original entity</source>
        <translation type="unfinished">Odległość od oryginalnego obiektu</translation>
    </message>
    <message>
        <source>Number:</source>
        <translation type="unfinished">Liczba:</translation>
    </message>
    <message>
        <source>Number of parallels to create</source>
        <translation type="unfinished">Liczba równoległych do utworzenia</translation>
    </message>
</context>
<context>
    <name>Ui_LineParallelThroughOptions</name>
    <message>
        <source>Line Parallel Through Options</source>
        <translation type="unfinished">Opcje &quot;linii równoległej poprzez&quot;</translation>
    </message>
    <message>
        <source>Number:</source>
        <translation type="unfinished">Liczba:</translation>
    </message>
    <message>
        <source>Number of parallels to create</source>
        <translation type="unfinished">Liczba równoległych do utworzenia</translation>
    </message>
</context>
<context>
    <name>Ui_LinePolygon2Options</name>
    <message>
        <source>Polygon Options</source>
        <translation type="unfinished">Opcje wieloboków</translation>
    </message>
    <message>
        <source>Number:</source>
        <translation type="unfinished">Liczba:</translation>
    </message>
    <message>
        <source>Number of edges</source>
        <translation type="unfinished">Liczba krawędzi</translation>
    </message>
</context>
<context>
    <name>Ui_LinePolygonOptions</name>
    <message>
        <source>Polygon Options</source>
        <translation type="unfinished">Opcje wieloboków</translation>
    </message>
    <message>
        <source>Number:</source>
        <translation type="unfinished">Liczba:</translation>
    </message>
    <message>
        <source>Number of edges</source>
        <translation type="unfinished">Liczba krawędzi</translation>
    </message>
</context>
<context>
    <name>Ui_LineRelAngleOptions</name>
    <message>
        <source>Line Relative Angle Options</source>
        <translation type="unfinished">Opcje linii z kątem względnym</translation>
    </message>
    <message>
        <source>Angle:</source>
        <translation type="unfinished">Kąt:</translation>
    </message>
    <message>
        <source>Line angle</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Length:</source>
        <translation type="unfinished">Długość:</translation>
    </message>
    <message>
        <source>Length of line</source>
        <translation type="unfinished">Długość linii</translation>
    </message>
</context>
<context>
    <name>Ui_MTextOptions</name>
    <message>
        <source>Text Options</source>
        <translation type="unfinished">Opcje tekstu</translation>
    </message>
    <message>
        <source>Text:</source>
        <translation type="unfinished">Tekst:</translation>
    </message>
    <message>
        <source>Angle:</source>
        <translation type="unfinished">Kąt:</translation>
    </message>
</context>
<context>
    <name>Ui_ModifyOffsetOptions</name>
    <message>
        <source>Modify Offset Options</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Distance:</source>
        <translation type="unfinished">Odległość:</translation>
    </message>
    <message>
        <source>Offset from original entity</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>Ui_MoveRotateOptions</name>
    <message>
        <source>Move Rotate Options</source>
        <translation type="unfinished">Opcje przesuwania/obracania</translation>
    </message>
    <message>
        <source>Angle:</source>
        <translation type="unfinished">Kąt:</translation>
    </message>
</context>
<context>
    <name>Ui_PolylineOptions</name>
    <message>
        <source>Polyline Options</source>
        <translation type="unfinished">Opcje łamanej</translation>
    </message>
    <message>
        <source>Close</source>
        <translation type="unfinished">Zamknij</translation>
    </message>
    <message>
        <source>Undo</source>
        <translation type="unfinished">Cofnij</translation>
    </message>
    <message>
        <source>Line</source>
        <translation type="unfinished">Linia</translation>
    </message>
    <message>
        <source>Tangential</source>
        <translation type="unfinished">Styczny</translation>
    </message>
    <message>
        <source>Tan Radius</source>
        <translation type="unfinished">O promieniu</translation>
    </message>
    <message>
        <source>Angle</source>
        <translation type="unfinished">Kąt</translation>
    </message>
    <message>
        <source>Radius:</source>
        <translation type="unfinished">Promień:</translation>
    </message>
    <message>
        <source>Angle:</source>
        <translation type="unfinished">Kąt:</translation>
    </message>
    <message>
        <source>Counter Clockwise</source>
        <translation type="unfinished">Przeciwnie do wskazówek zegara</translation>
    </message>
    <message>
        <source>Clockwise</source>
        <translation type="unfinished">Zgodnie ze wskazówkami zegara</translation>
    </message>
</context>
<context>
    <name>Ui_PrintPreviewOptions</name>
    <message>
        <source>Print Preview Options</source>
        <translation type="unfinished">Opcje podglądu wydruku</translation>
    </message>
    <message>
        <source>&lt;html&gt;&lt;head/&gt;&lt;body&gt;&lt;p&gt;Print Scale is locked to the current value&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>fixed</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Toggle Black / White mode</source>
        <translation type="unfinished">Przełącz tryb czarny / biały</translation>
    </message>
    <message>
        <source>Center to page</source>
        <translation type="unfinished">Wycentruj na stronie</translation>
    </message>
    <message>
        <source>Fit to page</source>
        <translation type="unfinished">Rozmieść na stronie</translation>
    </message>
    <message>
        <source>Apply Print Scale to line width</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Calculate number of pages needed to contain the drawing</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>Ui_RoundOptions</name>
    <message>
        <source>Round Options</source>
        <translation type="unfinished">Opcje zaokrąglania</translation>
    </message>
    <message>
        <source>Check to trim both edges to the rounding</source>
        <translation type="unfinished">Wyrównaj obydwie krawędzie do zaokrąglenia</translation>
    </message>
    <message>
        <source>Trim</source>
        <translation type="unfinished">Przytnij</translation>
    </message>
    <message>
        <source>Radius:</source>
        <translation type="unfinished">Promień:</translation>
    </message>
</context>
<context>
    <name>Ui_SnapDistOptions</name>
    <message>
        <source>Snap Distance Options</source>
        <translation type="unfinished">Opcje odległości lokalizowania</translation>
    </message>
    <message>
        <source>Distance:</source>
        <translation type="unfinished">Odległość:</translation>
    </message>
</context>
<context>
    <name>Ui_SnapMiddleOptions</name>
    <message>
        <source>Snap Distance Options</source>
        <translation type="unfinished">Opcje odległości lokalizowania</translation>
    </message>
    <message>
        <source>Middle Points:</source>
        <translation type="unfinished">Punkty centralne:</translation>
    </message>
    <message>
        <source>Number of equidistant division points</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>Ui_SplineOptions</name>
    <message>
        <source>Spline Options</source>
        <translation type="unfinished">Opcje krzywej składanej</translation>
    </message>
    <message>
        <source>Degree:</source>
        <translation type="unfinished">Stopień:</translation>
    </message>
    <message>
        <source>Closed</source>
        <translation type="unfinished">Zamknięta</translation>
    </message>
    <message>
        <source>Undo</source>
        <translation type="unfinished">Cofnij</translation>
    </message>
</context>
<context>
    <name>Ui_TextOptions</name>
    <message>
        <source>Text Options</source>
        <translation type="unfinished">Opcje tekstu</translation>
    </message>
    <message>
        <source>Text:</source>
        <translation type="unfinished">Tekst:</translation>
    </message>
    <message>
        <source>Angle:</source>
        <translation type="unfinished">Kąt:</translation>
    </message>
</context>
<context>
    <name>Ui_TrimAmountOptions</name>
    <message>
        <source>Trim Amount Options</source>
        <translation type="unfinished">Opcje wyrównywania o wartość</translation>
    </message>
    <message>
        <source>Distance. Negative values for trimming, positive values for extending.</source>
        <translation type="unfinished">Odległóść. Wartości ujemne dla przycięcia, dodatnie dla przedłużenia.</translation>
    </message>
    <message>
        <source>Length:</source>
        <translation type="unfinished">Długość:</translation>
    </message>
    <message>
        <source>Distance. Negative values for trimming, positive values for extending. Negative sign is ignored when trimming to final total length.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>The input length is used as total length after trimming, instead of length increase</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>WidgetCreator</name>
    <message>
        <source>Frame</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>&gt;</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>&lt;</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Name</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Create</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Destroy</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Assign</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Update</source>
        <translation type="unfinished"></translation>
    </message>
</context>
</TS>