This is a custom-made red/black skin for the Creality CR10S-PRO (V2). I made it because the stock one looked not very modern in my eyes. The skin is made with a simplistic and minimalitstic approach, but it's still based on the stock skin of the TinyMachines Firmware DW7.4.4. If you find design flaws or typos please consider contributing a pull request, I will react quickly to any contribution.
I AM NOT RESPONSIBLE FOR ANY DAMAGE TO YOUR PRINTER.
- Place the DWIN_SET Folder on a Micro-SD-Card
- Power off the printer completely and disconnect it from the grid
- Undo all Screws holding the bottom-plate of your CR10S PRO (V2)
- Insert the Micro-SD-Card into the Micro-SD-Slot on the backside of the touchscreen
- Connect the printer to power again and turn it on, the Display should show a flashing-screen now
- After all Screens were shown on the Touchscreen, power of the printer again and reassemble the printer again
- Enjoy the futuristic new look ! :)
- If you want to modify the bmp-Files, be sure to export them in 24-bit BMP Format
- I removed the original Chinese Translation-Screens, if someone wants to port the Chinese Screens, feel free to contribute :)