writing about the now three different layers

LydByDissing · Dec 28, 2021 · 17c148f · 17c148f
1 parent 785280d
commit 17c148f
Show file tree

Hide file tree

Showing 17 changed files with 11,887 additions and 3,728 deletions.
diff --git a/docs/source/speaker/parts/cabinet-layer-1/cabinet-layer-1-drawing.pdf b/docs/source/speaker/parts/cabinet-layer-1/cabinet-layer-1-drawing.pdf
diff --git a/docs/source/speaker/parts/cabinet-layer-1/cabinet-layer-1-drawing.png b/docs/source/speaker/parts/cabinet-layer-1/cabinet-layer-1-drawing.png
diff --git a/docs/source/speaker/parts/cabinet-layer-1/cabinet-layer-1.step b/docs/source/speaker/parts/cabinet-layer-1/cabinet-layer-1.step
diff --git a/docs/source/speaker/parts/cabinet-layer-2/cabinet-layer-2-drawing.pdf b/docs/source/speaker/parts/cabinet-layer-2/cabinet-layer-2-drawing.pdf
diff --git a/docs/source/speaker/parts/cabinet-layer-2/cabinet-layer-2-drawing.png b/docs/source/speaker/parts/cabinet-layer-2/cabinet-layer-2-drawing.png
diff --git a/docs/source/speaker/parts/cabinet-layer-2/cabinet-layer-2.step b/docs/source/speaker/parts/cabinet-layer-2/cabinet-layer-2.step
diff --git a/docs/source/speaker/parts/cabinet-layer-3/cabinet-layer-3-drawing.pdf b/docs/source/speaker/parts/cabinet-layer-3/cabinet-layer-3-drawing.pdf
diff --git a/docs/source/speaker/parts/cabinet-layer-3/cabinet-layer-3-drawing.png b/docs/source/speaker/parts/cabinet-layer-3/cabinet-layer-3-drawing.png
diff --git a/docs/source/speaker/parts/cabinet-layer-3/cabinet-layer-3.step b/docs/source/speaker/parts/cabinet-layer-3/cabinet-layer-3.step
diff --git a/docs/source/speaker/parts/cabinet-layer/cabinet-layer-drawing.pdf b/docs/source/speaker/parts/cabinet-layer/cabinet-layer-drawing.pdf
diff --git a/docs/source/speaker/parts/cabinet-layer/cabinet-layer-drawing.png b/docs/source/speaker/parts/cabinet-layer/cabinet-layer-drawing.png
diff --git a/docs/source/speaker/parts/cabinet-layer/cabinet-layer.step b/docs/source/speaker/parts/cabinet-layer/cabinet-layer.step
diff --git a/docs/source/speaker/parts/layer-1.rst b/docs/source/speaker/parts/layer-1.rst
@@ -0,0 +1,33 @@
+Cabinet Layer 1
+***************
+
+.. sidebar:: Parts information
+  :subtitle: See the below for a quick overview of the naming and ID information of this part.
+
+  | **Part name**: *Cabinet layer 1*
+  | **Parts ID**: N785IG
+  | **Material**: 12mm, MDF
+
+Part description
+----------------
+This is the bottom layer of the cabinet. Here speaker wire cable tracks are cut into the materiel.
+To make room for the DC barrel power plug, a large keyhole slot is cutout.
+
+In the middle of the part a single circle is cutout to indicate the layer number. One circle equals layer 1.
+
+The four small holes (Ø3,5mm) -- one in each corner -- are used when mounting the back plate to the main cabinet. The three larger holes (Ø6mm) are using for aligning the three layers during cabinet assembly.
+
+.. image:: cabinet-layer-1/cabinet-layer-1-drawing.png
+  :width: 500
+  :alt: Drawing with measurements of the back panel
+
+Finish
+------
+This part doesn't require any finish.
+
+Downloads
+---------
+
+Download the drawing as a PDF :download:`cabinet-layer-1-drawing.pdf <cabinet-layer-1/cabinet-layer-1-drawing.pdf>`.
+
+Download the CAD file in .STEP format :download:`cabinet-layer-1.step <cabinet-layer-1/cabinet-layer-1.step>`.
diff --git a/docs/source/speaker/parts/layer-2.rst b/docs/source/speaker/parts/layer-2.rst
@@ -0,0 +1,34 @@
+Cabinet Layer 2
+***************
+
+.. sidebar:: Parts information
+  :subtitle: See the below for a quick overview of the naming and ID information of this part.
+
+  | **Part name**: *Cabinet layer 1*
+  | **Parts ID**: G9SHW9
+  | **Material**: 12mm, MDF
+
+Part description
+----------------
+This is the middle layer of the cabinet. To make room for the DC barrel power socket, a matching slot is cutout. this is done so the socket is counter sunk into the materiel.
+
+In the middle of the part a couple of circles are cutout to indicate the layer number. Two circles equals layer 2.
+
+The four small holes (Ø3,5mm) -- one in each corner -- are used when mounting the back plate to the main cabinet. Depending on the length on the screws used when mounting the back panel, these holes need to be bored.
+The three larger holes (Ø6mm) are using for aligning the three layers during cabinet assembly.
+
+
+.. image:: cabinet-layer-2/cabinet-layer-2-drawing.png
+  :width: 500
+  :alt: Drawing with measurements of the back panel
+
+Finish
+------
+This part doesn't require any finish.
+
+Downloads
+---------
+
+Download the drawing as a PDF :download:`cabinet-layer-2-drawing.pdf <cabinet-layer-2/cabinet-layer-2-drawing.pdf>`.
+
+Download the CAD file in .STEP format :download:`cabinet-layer-2.step <cabinet-layer-2/cabinet-layer-2.step>`.
diff --git a/docs/source/speaker/parts/layer-3.rst b/docs/source/speaker/parts/layer-3.rst
@@ -0,0 +1,38 @@
+Cabinet Layer 3
+***************
+
+.. sidebar:: Parts information
+  :subtitle: See the below for a quick overview of the naming and ID information of this part.
+
+  | **Part name**: *Cabinet layer 1*
+  | **Parts ID**: 4IHS8E
+  | **Material**: 12mm, MDF
+
+Part description
+----------------
+This is the third layer of the cabinet. A long DC power cable track are cut into this layers. This helps route the wires from the DC socket to the PCB; which is placed in the upper left compartment.
+
+In the middle of the part a couple of circles are cutout to indicate the layer number. Three circles equals layer 3.
+
+The four small holes (Ø3,5mm) -- one in each corner -- are used when mounting the back plate to the main cabinet. Depending on the length on the screws used when mounting the back panel, these holes need to be bored
+
+.. note::
+
+	The back panel mounting holes can likely be omitted in this part, as the back panel mounting screws are unlikely to reach this far into the cabinet.
+
+The three larger holes (Ø6mm) are using for aligning the three layers during cabinet assembly.
+
+.. image:: cabinet-layer-3/cabinet-layer-3-drawing.png
+  :width: 500
+  :alt: Drawing with measurements of the back panel
+
+Finish
+------
+This part doesn't require any finish.
+
+Downloads
+---------
+
+Download the drawing as a PDF :download:`cabinet-layer-3-drawing.pdf <cabinet-layer-3/cabinet-layer-3-drawing.pdf>`.
+
+Download the CAD file in .STEP format :download:`cabinet-layer-3.step <cabinet-layer-3/cabinet-layer-3.step>`.
diff --git a/docs/source/speaker/parts/power-brick.rst b/docs/source/speaker/parts/power-brick.rst
@@ -26,7 +26,7 @@ Please see the tables below for further details.
   +--------------+-----------------+----------------+
   | Plug type    | Plug dimensions | Cable length   |
   +==============+=================+================+
-  | Barrel, male | 5,5mm x 2,1mm   | 1,5m           |
+  | Barrel, male | 5,5mm x 2,1mm   | >=1,5m           |
   +--------------+-----------------+----------------+
 
 Sourcing requirements

diff --git a/docs/source/speaker/parts/standard-layer.rst b/docs/source/speaker/parts/standard-layer.rst