Skip to content
Files and settings from my work on the Creality CR10
Branch: master
Clone or download
Fetching latest commit…
Cannot retrieve the latest commit at this time.
Permalink
Type Name Latest commit message Commit time
Failed to load latest commit information.
CURA 2.6.2
Printer Settings
STL Files
README.md

README.md

CR10

Files and settings from my work on the Creality CR10. General use print, vase mode for rockets and 3D Lab print profiles included. Use the aircraft profiles with the 3Dlabprints.com planes. Profiles were developed for use with the Edge 540 aircraft.

Some files are remixes from Thingiverse. Someday I'll get them posted there too.

Videos showing the results can be found here: https://www.youtube.com/playlist?list=PLxyM2a_cfnzh4BQ6e20lYyFzN7XcakLek

3DLabPrint Planes videos here: https://www.youtube.com/watch?v=kqCEuvkT96I&list=PLxyM2a_cfnzjqXU2XUU06dXUqVmngzLA-

Added profiles for the GASB flying wing found on Thingiverse here: https://www.thingiverse.com/thing:1659724

Compatibility: 23/2018- Profiles are confirmed working with Cura 2.6.2 Feb 2019- Added CURA since Ultimaker site has removed it.

You can’t perform that action at this time.