Double your bandwith on your Qualcomm devices!
高通设备 WiFi 增强模块。
By default, some devices provided an ini file to control the WiFi behavior. This module modified the WCNSS_qcom_cfg.ini in order to support 40mhz.
默认情况下，某些设备提供了一个ini文件来控制 WiFi 行为，该模块修改了WCNSS_qcom_cfg.ini以支持40MHz。
- Make 2.4Ghz/5Ghz WiFi running at 40Mhz enabled. 开启 40Mhz WiFi 支持。
gChannelBondingMode24GHz=1
gChannelBondingMode5GHz=1
- Make forced WiFi antenna 1T1R on MTK solution AP disabled. 关闭联发科路由 单天线 WiFi 限制。
gForce1x1Exception=0
- Enable SAE WPA3. 开启SAE WPA3。
sae_enabled=1
- Disable BandCapability limits. 禁用频段适用限制。
BandCapability=0
This module should work on most of the devices. The basic logic is simple, but not all devices need such kind of module. If you can find WCNSS_qcom_cfg.ini in your system partition, please open an issue to report it to me; if you can't, this module won't work for you, including almost all Nexus/Pixel devices.
该模块可在大多数设备上使用。其逻辑很简单，但是并非所有设备都适用该模块。如果您可以在系统分区中找到WCNSS_qcom_cfg.ini，请创建 issue 告诉我。 如果不能，则该模块将对您的设备不起作用，包括几乎所有的 Nexus / Pixel 设备。
Please follow the instuction below from @axeldna: 请按照说明进行操作
- Removed the installed WiFi Bonding module. 移除已安装了的WiFi Bonding模块。
- Removed all saved WiFi 2.4Ghz networks (I removed all of them anyway, but shouldn't be necessary) . 移除所有已保存的2.4Ghz的WiFi（非必要）
- Rebooted the phone (to make sure WiFi settings are removed from cloud account too). 重启手机（以确保从云服务中删除相关的WiFi设置项）。
- Installed the WiFi Bonding module. 安装WiFi Bonding模块。
- Rebooted the phone (as indicated by Magisk to start the module). 重启手机（根据Magisk指示来重启）。
- With a phone "free of WiFi" and with a fresh WiFi Bonding module, I joined 2.4Ghz WiFi networks. 试着开始接入2.4Ghz的WiFi。
- Checked my newly registered 2.4Ghz networks and they are showing 150Mbps Link Speed. 自测新连上的2.4Ghz的WiFi有150Mbps的连接速度。
- On some MTK solution AP, they are showing 300Mbps Link Speed. 连接一些联发科路由的WiFi有300Mbps的连接速度。
- You should use latest Magisk Manager to install this module. If you meet any problem under installation from Magisk Manager, please try to install it from recovery. 您应该使用最新的Magisk Manager来安装此模块。如果您在Magisk Manager中安装模块遇到问题，请尝试使用Recovery来安装
- Support 3rd party Magisk versions with magiskhide.
- Support Magisk Canary(26404).
- Fix path detection for old devices.
- Any issue or pull request is welcomed. 欢迎提交 issue 以及 Pull Request
- Star this module at GitHub 欢迎点亮项目小星星
