rpl_gtid_basic.result

include/rpl_init.inc [topology=1->2->3->4]
connection server_1;
*** GTID position should be empty here ***
SELECT BINLOG_GTID_POS('<BINLOG_FILE>',<BINLOG_POS>);
BINLOG_GTID_POS('<BINLOG_FILE>',<BINLOG_POS>)

CREATE TABLE t1 (a INT PRIMARY KEY, b VARCHAR(10)) ENGINE=MyISAM;
CREATE TABLE t2 (a INT PRIMARY KEY, b VARCHAR(10)) ENGINE=InnoDB;
INSERT INTO t1 VALUES (1, "m1");
INSERT INTO t1 VALUES (2, "m2"), (3, "m3"), (4, "m4");
INSERT INTO t2 VALUES (1, "i1");
BEGIN;
INSERT INTO t2 VALUES (2, "i2"), (3, "i3");
INSERT INTO t2 VALUES (4, "i4");
COMMIT;
*** GTID position should be non-empty here ***
SELECT BINLOG_GTID_POS('<BINLOG_FILE>',<BINLOG_POS>);
BINLOG_GTID_POS('<BINLOG_FILE>',<BINLOG_POS>)
<GTID_POS_SERVER_1>
connection server_2;
*** GTID position should be the same as on server_1 ***
SELECT BINLOG_GTID_POS('<BINLOG_FILE>',<BINLOG_POS>);
BINLOG_GTID_POS('<BINLOG_FILE>',<BINLOG_POS>)
<GTID_POS_SERVER_1>
SELECT * FROM t1 ORDER BY a;
a	b
1	m1
2	m2
3	m3
4	m4
SELECT * FROM t2 ORDER BY a;
a	b
1	i1
2	i2
3	i3
4	i4
connection server_3;
SELECT * FROM t1 ORDER BY a;
a	b
1	m1
2	m2
3	m3
4	m4
SELECT * FROM t2 ORDER BY a;
a	b
1	i1
2	i2
3	i3
4	i4
connection server_4;
SELECT * FROM t1 ORDER BY a;
a	b
1	m1
2	m2
3	m3
4	m4
SELECT * FROM t2 ORDER BY a;
a	b
1	i1
2	i2
3	i3
4	i4
*** Now take out D, let it fall behind a bit, and then test re-attaching it to A ***
connection server_4;
include/stop_slave.inc
connection server_1;
INSERT INTO t1 VALUES (5, "m1a");
INSERT INTO t2 VALUES (5, "i1a");
connection server_4;
CHANGE MASTER TO master_host = '127.0.0.1', master_port = MASTER_PORT,
MASTER_USE_GTID=CURRENT_POS;
Warnings:
Warning	1681	'master_use_gtid=current_pos' is deprecated and will be removed in a future release. Please use master_demote_to_slave=1 instead
include/start_slave.inc
SELECT * FROM t1 ORDER BY a;
a	b
1	m1
2	m2
3	m3
4	m4
5	m1a
SELECT * FROM t2 ORDER BY a;
a	b
1	i1
2	i2
3	i3
4	i4
5	i1a
*** Now move B to D (C is still replicating from B) ***
connection server_2;
include/stop_slave.inc
CHANGE MASTER TO master_host = '127.0.0.1', master_port = SERVER_MYPORT_4,
MASTER_USE_GTID=CURRENT_POS;
Warnings:
Warning	1681	'master_use_gtid=current_pos' is deprecated and will be removed in a future release. Please use master_demote_to_slave=1 instead
include/start_slave.inc
connection server_4;
UPDATE t2 SET b="j1a" WHERE a=5;
connection server_2;
SELECT * FROM t1 ORDER BY a;
a	b
1	m1
2	m2
3	m3
4	m4
5	m1a
SELECT * FROM t2 ORDER BY a;
a	b
1	i1
2	i2
3	i3
4	i4
5	j1a
*** Now move C to D, after letting it fall a little behind ***
connection server_3;
include/stop_slave.inc
connection server_1;
INSERT INTO t2 VALUES (6, "i6b");
INSERT INTO t2 VALUES (7, "i7b");
include/save_master_gtid.inc
connection server_3;
CHANGE MASTER TO master_host = '127.0.0.1', master_port = SERVER_MYPORT_4,
MASTER_USE_GTID=CURRENT_POS;
Warnings:
Warning	1681	'master_use_gtid=current_pos' is deprecated and will be removed in a future release. Please use master_demote_to_slave=1 instead
include/start_slave.inc
include/sync_with_master_gtid.inc
SELECT * FROM t2 ORDER BY a;
a	b
1	i1
2	i2
3	i3
4	i4
5	j1a
6	i6b
7	i7b
*** Now change everything back to what it was, to make rpl_end.inc happy
connection server_2;
include/sync_with_master_gtid.inc
include/stop_slave.inc
CHANGE MASTER TO master_host = '127.0.0.1', master_port = MASTER_MYPORT;
include/start_slave.inc
include/wait_for_slave_to_start.inc
connection server_3;
include/stop_slave.inc
CHANGE MASTER TO master_host = '127.0.0.1', master_port = SLAVE_MYPORT;
include/start_slave.inc
include/sync_with_master_gtid.inc
connection server_4;
include/stop_slave.inc
CHANGE MASTER TO master_host = '127.0.0.1', master_port = SERVER_MYPORT_3;
include/start_slave.inc
connection server_1;
DROP TABLE t1,t2;
include/save_master_gtid.inc
*** A few more checks for BINLOG_GTID_POS function ***
SELECT BINLOG_GTID_POS();
ERROR 42000: Incorrect parameter count in the call to native function 'BINLOG_GTID_POS'
SELECT BINLOG_GTID_POS('a');
ERROR 42000: Incorrect parameter count in the call to native function 'BINLOG_GTID_POS'
SELECT BINLOG_GTID_POS('a',1,NULL);
ERROR 42000: Incorrect parameter count in the call to native function 'BINLOG_GTID_POS'
SELECT BINLOG_GTID_POS(1,'a');
BINLOG_GTID_POS(1,'a')
NULL
Warnings:
Warning	1292	Truncated incorrect INTEGER value: 'a'
SELECT BINLOG_GTID_POS(NULL,NULL);
BINLOG_GTID_POS(NULL,NULL)
NULL
SELECT BINLOG_GTID_POS('',1);
BINLOG_GTID_POS('',1)

SELECT BINLOG_GTID_POS('a',1);
BINLOG_GTID_POS('a',1)
NULL
SELECT BINLOG_GTID_POS('master-bin.000001',-1);
BINLOG_GTID_POS('master-bin.000001',-1)
NULL
SELECT BINLOG_GTID_POS('master-bin.000001',0);
BINLOG_GTID_POS('master-bin.000001',0)

SELECT BINLOG_GTID_POS('master-bin.000001',18446744073709551615);
BINLOG_GTID_POS('master-bin.000001',18446744073709551615)
NULL
SELECT BINLOG_GTID_POS('master-bin.000001',18446744073709551616);
BINLOG_GTID_POS('master-bin.000001',18446744073709551616)
NULL
Warnings:
Warning	1916	Got overflow when converting '18446744073709551616' to INT. Value truncated
SET sql_log_bin= 0;
CREATE TABLE t1 AS SELECT MASTER_POS_WAIT(@binlog_file, 4, 0);
SELECT BINLOG_GTID_POS(@binlog_file, 4);
BINLOG_GTID_POS(@binlog_file, 4)
NULL
DROP TABLE t1;
SET sql_log_bin= 1;
*** Some tests of @@GLOBAL.gtid_binlog_state ***
connection server_2;
include/sync_with_master_gtid.inc
include/stop_slave.inc
connection server_1;
SET @old_state= @@GLOBAL.gtid_binlog_state;
SET GLOBAL gtid_binlog_state = '';
ERROR HY000: This operation is not allowed if any GTID has been logged to the binary log. Run RESET MASTER first to erase the log
RESET MASTER;
SET GLOBAL gtid_binlog_state = '';
FLUSH LOGS;
show binary logs;
Log_name	File_size
master-bin.000001	#
master-bin.000002	#
SET GLOBAL gtid_binlog_state = '0-1-10,1-2-20,0-3-30';
show binary logs;
Log_name	File_size
master-bin.000001	#
include/show_binlog_events.inc
Log_name	Pos	Event_type	Server_id	End_log_pos	Info
master-bin.000001	#	Format_desc	#	#	SERVER_VERSION, BINLOG_VERSION
master-bin.000001	#	Start_encryption	#	#	
master-bin.000001	#	Gtid_list	#	#	[#-#-#]
master-bin.000001	#	Binlog_checkpoint	#	#	master-bin.000001
SET GLOBAL gtid_binlog_state = @old_state;
ERROR HY000: This operation is not allowed if any GTID has been logged to the binary log. Run RESET MASTER first to erase the log
RESET MASTER;
SET GLOBAL gtid_binlog_state = @old_state;
CREATE TABLE t1 (a INT PRIMARY KEY);
SET gtid_seq_no=100;
INSERT INTO t1 VALUES (1);
include/save_master_gtid.inc
connection server_2;
include/start_slave.inc
include/sync_with_master_gtid.inc
SELECT * FROM t1;
a
1
Gtid_IO_Pos = '0-1-100'
*** Test @@LAST_GTID and MASTER_GTID_WAIT() ***
connection server_1;
DROP TABLE t1;
CREATE TABLE t1 (a INT PRIMARY KEY) ENGINE=InnoDB;
connection server_2;
include/stop_slave.inc
connect  m1,127.0.0.1,root,,test,$SERVER_MYPORT_1,;
SELECT @@last_gtid;
@@last_gtid

SET gtid_seq_no=110;
SELECT @@last_gtid;
@@last_gtid

BEGIN;
SELECT @@last_gtid;
@@last_gtid

INSERT INTO t1 VALUES (2);
SELECT @@last_gtid;
@@last_gtid

COMMIT;
SELECT @@last_gtid;
@@last_gtid
0-1-110
connect  s1,127.0.0.1,root,,test,$SERVER_MYPORT_2,;
SET @pos= '0-1-110';
SELECT master_gtid_wait(NULL);
master_gtid_wait(NULL)
NULL
SELECT master_gtid_wait('', NULL);
master_gtid_wait('', NULL)
0
SHOW STATUS LIKE 'Master_gtid_wait_count';
Variable_name	Value
Master_gtid_wait_count	1
SHOW STATUS LIKE 'Master_gtid_wait_timeouts';
Variable_name	Value
Master_gtid_wait_timeouts	0
SHOW STATUS LIKE 'Master_gtid_wait_time';
Variable_name	Value
Master_gtid_wait_time	0
SELECT master_gtid_wait(@pos, 0.5);
master_gtid_wait(@pos, 0.5)
-1
SELECT * FROM t1 ORDER BY a;
a
SELECT master_gtid_wait(@pos);
connection server_2;
include/start_slave.inc
connection s1;
master_gtid_wait(@pos)
0
SELECT * FROM t1 ORDER BY a;
a
2
include/stop_slave.inc
connection server_1;
SET gtid_domain_id= 1;
INSERT INTO t1 VALUES (3);
connection s1;
SET @pos= 'POS';
SELECT master_gtid_wait(@pos, 0);
master_gtid_wait(@pos, 0)
-1
SELECT * FROM t1 WHERE a >= 3;
a
SELECT master_gtid_wait(@pos, -1);
connection server_2;
include/start_slave.inc
connection s1;
master_gtid_wait(@pos, -1)
0
SELECT * FROM t1 WHERE a >= 3;
a
3
SELECT master_gtid_wait('1-1-1', 0);
master_gtid_wait('1-1-1', 0)
0
connection s1;
SELECT master_gtid_wait('2-1-1,1-1-4,0-1-110');
connect  s2,127.0.0.1,root,,test,$SERVER_MYPORT_2,;
SELECT master_gtid_wait('0-1-1000', 0.5);
connect  s3,127.0.0.1,root,,test,$SERVER_MYPORT_2,;
SELECT master_gtid_wait('0-1-2000');
connect  s4,127.0.0.1,root,,test,$SERVER_MYPORT_2,;
SELECT master_gtid_wait('2-1-10');
connect  s5,127.0.0.1,root,,test,$SERVER_MYPORT_2,;
SELECT master_gtid_wait('2-1-6', 1);
connect  s6,127.0.0.1,root,,test,$SERVER_MYPORT_2,;
SELECT master_gtid_wait('2-1-5');
connect  s7,127.0.0.1,root,,test,$SERVER_MYPORT_2,;
SELECT master_gtid_wait('2-1-10');
connect  s8,127.0.0.1,root,,test,$SERVER_MYPORT_2,;
SELECT master_gtid_wait('2-1-5,1-1-4,0-1-110');
connect  s9,127.0.0.1,root,,test,$SERVER_MYPORT_2,;
SELECT master_gtid_wait('2-1-2');
connection server_2;
SHOW STATUS LIKE 'Master_gtid_wait_timeouts';
Variable_name	Value
Master_gtid_wait_timeouts	0
SHOW STATUS LIKE 'Master_gtid_wait_count';
Variable_name	Value
Master_gtid_wait_count	3
SELECT master_gtid_wait('1-1-1');
master_gtid_wait('1-1-1')
0
SHOW STATUS LIKE 'Master_gtid_wait_timeouts';
Variable_name	Value
Master_gtid_wait_timeouts	0
SHOW STATUS LIKE 'Master_gtid_wait_count';
Variable_name	Value
Master_gtid_wait_count	4
SET @a= MASTER_GTID_WAIT_TIME;
SELECT IF(@a <= 100*1000*1000, "OK", CONCAT("Error: wait time ", @a, " is larger than expected"))
AS Master_gtid_wait_time_as_expected;
Master_gtid_wait_time_as_expected
OK
connect  s10,127.0.0.1,root,,test,$SERVER_MYPORT_2,;
SELECT master_gtid_wait('0-1-109');
connection server_2;
SHOW STATUS LIKE 'Master_gtid_wait_timeouts';
Variable_name	Value
Master_gtid_wait_timeouts	0
SHOW STATUS LIKE 'Master_gtid_wait_count';
Variable_name	Value
Master_gtid_wait_count	4
SELECT master_gtid_wait('2-1-2', 0.5);
master_gtid_wait('2-1-2', 0.5)
-1
SHOW STATUS LIKE 'Master_gtid_wait_timeouts';
Variable_name	Value
Master_gtid_wait_timeouts	1
SHOW STATUS LIKE 'Master_gtid_wait_count';
Variable_name	Value
Master_gtid_wait_count	5
SET @a= MASTER_GTID_WAIT_TIME;
SELECT IF(@a BETWEEN 0.4*1000*1000 AND 100*1000*1000, "OK", CONCAT("Error: wait time ", @a, " not as expected")) AS Master_gtid_wait_time_as_expected;
Master_gtid_wait_time_as_expected
OK
KILL QUERY KILL_ID;
connection s3;
ERROR 70100: Query execution was interrupted
connection server_1;
SET gtid_domain_id=2;
SET gtid_seq_no=2;
INSERT INTO t1 VALUES (4);
connection s9;
master_gtid_wait('2-1-2')
0
connection server_2;
KILL CONNECTION KILL_ID;
connection s6;
Got one of the listed errors
connection server_1;
SET gtid_domain_id=1;
SET gtid_seq_no=4;
INSERT INTO t1 VALUES (5);
SET gtid_domain_id=2;
SET gtid_seq_no=5;
INSERT INTO t1 VALUES (6);
connection s8;
master_gtid_wait('2-1-5,1-1-4,0-1-110')
0
connection s1;
master_gtid_wait('2-1-1,1-1-4,0-1-110')
0
connection s2;
master_gtid_wait('0-1-1000', 0.5)
-1
connection s5;
master_gtid_wait('2-1-6', 1)
-1
connection s10;
master_gtid_wait('0-1-109')
0
connection server_1;
SET gtid_domain_id=2;
SET gtid_seq_no=10;
INSERT INTO t1 VALUES (7);
connection s4;
master_gtid_wait('2-1-10')
0
connection s7;
master_gtid_wait('2-1-10')
0
*** Test gtid_slave_pos when used with GTID ***
connection server_2;
include/stop_slave.inc
connection server_1;
SET gtid_domain_id=2;
SET gtid_seq_no=1000;
INSERT INTO t1 VALUES (10);
INSERT INTO t1 VALUES (11);
connection server_2;
SET sql_slave_skip_counter= 1;
include/start_slave.inc
SELECT * FROM t1 WHERE a >= 10 ORDER BY a;
a
11
SELECT IF(LOCATE("2-1-1001", @@GLOBAL.gtid_slave_pos)>0, "Ok", CONCAT("ERROR! expected GTID 2-1-1001 not found in gtid_slave_pos: ", @@GLOBAL.gtid_slave_pos)) AS status;
status
Ok
include/stop_slave.inc
connection server_1;
SET gtid_domain_id=2;
SET gtid_seq_no=1010;
INSERT INTO t1 VALUES (12);
INSERT INTO t1 VALUES (13);
connection server_2;
SET sql_slave_skip_counter= 2;
include/start_slave.inc
SELECT * FROM t1 WHERE a >= 10 ORDER BY a;
a
11
13
SELECT IF(LOCATE("2-1-1011", @@GLOBAL.gtid_slave_pos)>0, "Ok", CONCAT("ERROR! expected GTID 2-1-1011 not found in gtid_slave_pos: ", @@GLOBAL.gtid_slave_pos)) AS status;
status
Ok
include/stop_slave.inc
connection server_1;
SET gtid_domain_id=2;
SET gtid_seq_no=1020;
INSERT INTO t1 VALUES (14);
INSERT INTO t1 VALUES (15);
INSERT INTO t1 VALUES (16);
connection server_2;
SET sql_slave_skip_counter= 3;
include/start_slave.inc
SELECT * FROM t1 WHERE a >= 10 ORDER BY a;
a
11
13
15
16
SELECT IF(LOCATE("2-1-1022", @@GLOBAL.gtid_slave_pos)>0, "Ok", CONCAT("ERROR! expected GTID 2-1-1022 not found in gtid_slave_pos: ", @@GLOBAL.gtid_slave_pos)) AS status;
status
Ok
include/stop_slave.inc
connection server_1;
SET gtid_domain_id=2;
SET gtid_seq_no=1030;
SET @@binlog_annotate_row_events= 0;
INSERT INTO t1 VALUES (17);
INSERT INTO t1 VALUES (18);
INSERT INTO t1 VALUES (19);
SET @@binlog_annotate_row_events= 1;
connection server_2;
SET sql_slave_skip_counter= 5;
include/start_slave.inc
SELECT * FROM t1 WHERE a >= 10 ORDER BY a;
a
11
13
15
16
19
SELECT IF(LOCATE("2-1-1032", @@GLOBAL.gtid_slave_pos)>0, "Ok", CONCAT("ERROR! expected GTID 2-1-1032 not found in gtid_slave_pos: ", @@GLOBAL.gtid_slave_pos)) AS status;
status
Ok
include/stop_slave.inc
connection server_1;
SET gtid_domain_id=3;
SET gtid_seq_no=100;
CREATE TABLE t2 (a INT PRIMARY KEY);
DROP TABLE t2;
SET gtid_domain_id=2;
SET gtid_seq_no=1040;
INSERT INTO t1 VALUES (20);
connection server_2;
SET @saved_mode= @@GLOBAL.slave_ddl_exec_mode;
SET GLOBAL slave_ddl_exec_mode=STRICT;
SET sql_slave_skip_counter=1;
START SLAVE UNTIL master_gtid_pos="3-1-100";
include/sync_with_master_gtid.inc
include/wait_for_slave_to_stop.inc
SELECT * FROM t2;
ERROR 42S02: Table 'test.t2' doesn't exist
SELECT IF(LOCATE("3-1-100", @@GLOBAL.gtid_slave_pos)>0, "Ok", CONCAT("ERROR! expected GTID 3-1-100 not found in gtid_slave_pos: ", @@GLOBAL.gtid_slave_pos)) AS status;
status
Ok
SET sql_log_bin=0;
CALL mtr.add_suppression("Slave: Unknown table 'test\\.t2' Error_code: 1051");
SET sql_log_bin=1;
START SLAVE;
include/wait_for_slave_sql_error.inc [errno=1051]
SELECT IF(LOCATE("3-1-100", @@GLOBAL.gtid_slave_pos)>0, "Ok", CONCAT("ERROR! expected GTID 3-1-100 not found in gtid_slave_pos: ", @@GLOBAL.gtid_slave_pos)) AS status;
status
Ok
STOP SLAVE IO_THREAD;
SET sql_slave_skip_counter=2;
include/start_slave.inc
SELECT * FROM t1 WHERE a >= 20 ORDER BY a;
a
20
SELECT IF(LOCATE("3-1-101", @@GLOBAL.gtid_slave_pos)>0, "Ok", CONCAT("ERROR! expected GTID 3-1-101 not found in gtid_slave_pos: ", @@GLOBAL.gtid_slave_pos)) AS status;
status
Ok
SELECT IF(LOCATE("2-1-1040", @@GLOBAL.gtid_slave_pos)>0, "Ok", CONCAT("ERROR! expected GTID 2-1-1040 not found in gtid_slave_pos: ", @@GLOBAL.gtid_slave_pos)) AS status;
status
Ok
SET GLOBAL slave_ddl_exec_mode= @saved_mode;
*** Test GTID-connecting to a master with out-of-order sequence numbers in the binlog. ***
connection server_1;
SET gtid_domain_id= @@GLOBAL.gtid_domain_id;
INSERT INTO t1 VALUES (31);
connection server_2;
SET gtid_domain_id= @@GLOBAL.gtid_domain_id;
INSERT INTO t1 VALUES (32);
connection server_1;
INSERT INTO t1 VALUES (33);
connection server_2;
connection server_3;
include/stop_slave.inc
connection server_1;
INSERT INTO t1 VALUES (34);
connection server_2;
connection server_3;
include/start_slave.inc
SELECT * FROM t1 WHERE a >= 30 ORDER BY a;
a
31
32
33
34
connection server_4;
SELECT * FROM t1 WHERE a >= 30 ORDER BY a;
a
31
32
33
34
*** MDEV-31723: Crash on SET SESSION gtid_seq_no= DEFAULT
connection server_1;
SET SESSION gtid_seq_no= 2000;
SELECT @@SESSION.gtid_seq_no;
@@SESSION.gtid_seq_no
2000
INSERT INTO t1 VALUES (40);
SELECT @@SESSION.gtid_seq_no;
@@SESSION.gtid_seq_no
0
SELECT REGEXP_REPLACE(@@gtid_binlog_pos, ".*\\b(0-1-[0-9]+)\\b.*", "\\1") AS dom0_pos;
dom0_pos
0-1-2000
INSERT INTO t1 VALUES (41);
SELECT REGEXP_REPLACE(@@gtid_binlog_pos, ".*\\b(0-1-[0-9]+)\\b.*", "\\1") AS dom0_pos;
dom0_pos
0-1-2001
SET SESSION gtid_seq_no= 2010;
INSERT INTO t1 VALUES (42);
SELECT REGEXP_REPLACE(@@gtid_binlog_pos, ".*\\b(0-1-[0-9]+)\\b.*", "\\1") AS dom0_pos;
dom0_pos
0-1-2010
SET @old_strict= @@GLOBAL.gtid_strict_mode;
SET GLOBAL gtid_strict_mode= 1;
SET SESSION gtid_seq_no= 0;
INSERT INTO t1 VALUES (43);
SELECT REGEXP_REPLACE(@@gtid_binlog_pos, ".*\\b(0-1-[0-9]+)\\b.*", "\\1") AS dom0_pos;
dom0_pos
0-1-2011
SET GLOBAL gtid_strict_mode= @old_strict;
INSERT INTO t1 VALUES (44);
SELECT REGEXP_REPLACE(@@gtid_binlog_pos, ".*\\b(0-1-[0-9]+)\\b.*", "\\1") AS dom0_pos;
dom0_pos
0-1-2012
SET SESSION gtid_seq_no= 2020;
SET SESSION gtid_seq_no= 2030;
INSERT INTO t1 VALUES (45);
SELECT REGEXP_REPLACE(@@gtid_binlog_pos, ".*\\b(0-1-[0-9]+)\\b.*", "\\1") AS dom0_pos;
dom0_pos
0-1-2030
SET SESSION gtid_seq_no= 2040;
SET SESSION gtid_seq_no= DEFAULT;
INSERT INTO t1 VALUES (46);
SELECT REGEXP_REPLACE(@@gtid_binlog_pos, ".*\\b(0-1-[0-9]+)\\b.*", "\\1") AS dom0_pos;
dom0_pos
0-1-2031
INSERT INTO t1 VALUES (47);
SELECT REGEXP_REPLACE(@@gtid_binlog_pos, ".*\\b(0-1-[0-9]+)\\b.*", "\\1") AS dom0_pos;
dom0_pos
0-1-2032
SET SESSION gtid_seq_no= 2050;
SET SESSION gtid_seq_no= 0;
INSERT INTO t1 VALUES (48);
SELECT REGEXP_REPLACE(@@gtid_binlog_pos, ".*\\b(0-1-[0-9]+)\\b.*", "\\1") AS dom0_pos;
dom0_pos
0-1-2033
connection server_1;
DROP TABLE t1;
include/rpl_end.inc
#
# Start of 10.2 tests
#
#
# MDEV-10134 Add full support for DEFAULT
#
CREATE TABLE t1 (a VARCHAR(100) DEFAULT BINLOG_GTID_POS("master-bin.000001", 600));
ERROR HY000: Function or expression 'binlog_gtid_pos()' cannot be used in the DEFAULT clause of `a`
#
# End  of 10.2 tests
#
#
# Start of 10.3 tests
#
#
# MDEV-13967 Parameter data type control for Item_long_func
#
SELECT MASTER_GTID_WAIT(ROW(1,1),'str');
ERROR HY000: Illegal parameter data type row for operation 'master_gtid_wait'
SELECT MASTER_GTID_WAIT('str',ROW(1,1));
ERROR HY000: Illegal parameter data type row for operation 'master_gtid_wait'
#
# End of 10.3 tests
#