Deb: Add support for legacy init systems again

Partially reverts commit a4cc6fb.

While all current versions of Linux have systemd, support for traditional
init.d is still needed e.g. on Linux subsystem on Windows, kFreeBSD and
special variants of Debian/Ubuntu that for other reasons don't have
systemd.

Thus, re-introduce the init file that was remove, but this time with
then name 'mariadb'.

Supporting traditional sysv init in paraller with systemd is easy, since
Debian has facilities for it.

Also simplify and update salsa-ci.yml install/upgrade testing works
for all previous MariaDB and MySQL releases without any excess quirks.

Note that in fresh installs the salsa-ci.yml needs to run command
'service mariadb status' to control the service, while on upgrades
it is enough to run 'service mysql status', since the init.d/mysql
file is left behind from previous install, along with some other
config files such as /etc/default/mysql and /etc/mysql/* stuff.

debian/additions/debian-start

@@ -1,6 +1,6 @@
 #!/bin/bash
 #
-# This script is executed by "/etc/init.d/mysql" on every (re)start.
+# This script is executed by "/etc/init.d/mariadb" on every (re)start.
 #
 # Changes to this file will be preserved when updating the Debian package.
 #
@@ -9,10 +9,15 @@
 
 source /usr/share/mysql/debian-start.inc.sh
 
+# Read default/mysql first and then default/mariadb just like the init.d file does
 if [ -f /etc/default/mysql ]; then
   . /etc/default/mysql
 fi
 
+if [ -f /etc/default/mariadb ]; then
+  . /etc/default/mariadb
+fi
+
 MYSQL="/usr/bin/mysql --defaults-file=/etc/mysql/debian.cnf"
 MYADMIN="/usr/bin/mysqladmin --defaults-file=/etc/mysql/debian.cnf"
 # Don't run full mysql_upgrade on every server restart, use --version-check to do it only once

debian/mariadb-server-10.5.install

@@ -1,7 +1,6 @@
 debian/additions/debian-start etc/mysql
 debian/additions/debian-start.inc.sh usr/share/mysql
 debian/additions/echo_stderr usr/share/mysql
-debian/additions/mysql.init usr/share/mysql
 debian/additions/mysqld_safe_syslog.cnf etc/mysql/conf.d
 debian/additions/source_mariadb-10.5.py usr/share/apport/package-hooks
 etc/apparmor.d/usr.sbin.mysqld

debian/mariadb-server-10.5.logcheck.ignore.paranoid

@@ -1,8 +1,8 @@
-/etc/init.d/mysql\[[0-9]+\]: Check that mysqld is running and that the socket: '/var/run/mysqld/mysqld.sock' exists\!$
-/etc/init.d/mysql\[[0-9]+\]: '/usr/bin/mysqladmin --defaults-(extra-)?file=/etc/mysql/debian.cnf ping' resulted in$
+/etc/init.d/mariadb\[[0-9]+\]: Check that mysqld is running and that the socket: '/run/mysqld/mysqld.sock' exists\!$
+/etc/init.d/mariadb\[[0-9]+\]: '/usr/bin/mysqladmin --defaults-(extra-)?file=/etc/mysql/debian.cnf ping' resulted in$
 /etc/mysql/debian-start\[[0-9]+\]: Checking for crashed MySQL tables\.$
 mysqld\[[0-9]+\]: $
-mysqld\[[0-9]+\]: Version: .* socket: '/var/run/mysqld/mysqld.sock'  port: 3306$
+mysqld\[[0-9]+\]: Version: .* socket: '/run/mysqld/mysqld.sock'  port: 3306$
 mysqld\[[0-9]+\]: Warning: Ignoring user change to 'mysql' because the user was set to 'mysql' earlier on the command line$
 mysqld_safe\[[0-9]+\]: started$
 usermod\[[0-9]+\]: change user `mysql' GID from `([0-9]+)' to `\1'$

debian/mariadb-server-10.5.logcheck.ignore.server

@@ -1,6 +1,6 @@
-/etc/init.d/mysql\[[0-9]+\]: [0-9]+ processes alive and '/usr/bin/mysqladmin --defaults-(extra-)?file=/etc/mysql/debian.cnf ping' resulted in$
-/etc/init.d/mysql\[[0-9]+\]: Check that mysqld is running and that the socket: '/var/run/mysqld/mysqld.sock' exists\!$
-/etc/init.d/mysql\[[0-9]+\]: '/usr/bin/mysqladmin --defaults-(extra-)?file=/etc/mysql/debian.cnf ping' resulted in$
+/etc/init.d/mariadb\[[0-9]+\]: [0-9]+ processes alive and '/usr/bin/mysqladmin --defaults-(extra-)?file=/etc/mysql/debian.cnf ping' resulted in$
+/etc/init.d/mariadb\[[0-9]+\]: Check that mysqld is running and that the socket: '/run/mysqld/mysqld.sock' exists\!$
+/etc/init.d/mariadb\[[0-9]+\]: '/usr/bin/mysqladmin --defaults-(extra-)?file=/etc/mysql/debian.cnf ping' resulted in$
 /etc/mysql/debian-start\[[0-9]+\]: Checking for crashed MySQL tables\.$
 mysqld\[[0-9]+\]: ?$
 mysqld\[[0-9]+\]: .*InnoDB: Shutdown completed

debian/mariadb-server-10.5.logcheck.ignore.workstation

@@ -1,6 +1,6 @@
-/etc/init.d/mysql\[[0-9]+\]: [0-9]+ processes alive and '/usr/bin/mysqladmin --defaults-(extra-)?file=/etc/mysql/debian.cnf ping' resulted in$
-/etc/init.d/mysql\[[0-9]+\]: Check that mysqld is running and that the socket: '/var/run/mysqld/mysqld.sock' exists\!$
-/etc/init.d/mysql\[[0-9]+\]: '/usr/bin/mysqladmin --defaults-(extra-)?file=/etc/mysql/debian.cnf ping' resulted in$
+/etc/init.d/mariadb\[[0-9]+\]: [0-9]+ processes alive and '/usr/bin/mysqladmin --defaults-(extra-)?file=/etc/mysql/debian.cnf ping' resulted in$
+/etc/init.d/mariadb\[[0-9]+\]: Check that mysqld is running and that the socket: '/run/mysqld/mysqld.sock' exists\!$
+/etc/init.d/mariadb\[[0-9]+\]: '/usr/bin/mysqladmin --defaults-(extra-)?file=/etc/mysql/debian.cnf ping' resulted in$
 /etc/mysql/debian-start\[[0-9]+\]: Checking for crashed MySQL tables\.$
 mysqld\[[0-9]+\]: ?$
 mysqld\[[0-9]+\]: .*InnoDB: Shutdown completed

debian/additions/mysql.init → debian/mariadb-server-10.5.mariadb.init

@@ -1,7 +1,7 @@
 #!/bin/bash
 #
 ### BEGIN INIT INFO
-# Provides:          mysql
+# Provides:          mariadb
 # Required-Start:    $remote_fs $syslog
 # Required-Stop:     $remote_fs $syslog
 # Should-Start:      $network $named $time
@@ -26,12 +26,19 @@ SELF=$(cd $(dirname $0); pwd -P)/$(basename $0)
 MYADMIN="/usr/bin/mysqladmin --defaults-file=/etc/mysql/debian.cnf"
 
 # priority can be overridden and "-s" adds output to stderr
-ERR_LOGGER="logger -p daemon.err -t /etc/init.d/mysql -i"
+ERR_LOGGER="logger -p daemon.err -t /etc/init.d/mariadb -i"
 
 if [ -f /etc/default/mysql ]; then
   . /etc/default/mysql
 fi
 
+# Also source default/mariadb in case the installation was upgraded from
+# packages originally installed from MariaDB.org repositories, which have
+# had support for reading /etc/default/mariadb since March 2016.
+if [ -f /etc/default/mariadb ]; then
+  . /etc/default/mariadb
+fi
+
 # Safeguard (relative paths, core dumps..)
 cd /
 umask 077
@@ -108,7 +115,7 @@ case "${1:-''}" in
    log_end_msg 0
   else
     # Could be removed during boot
-    test -e /var/run/mysqld || install -m 755 -o mysql -g root -d /var/run/mysqld
+    test -e /run/mysqld || install -m 755 -o mysql -g root -d /run/mysqld
 
     # Start MariaDB!
     /usr/bin/mysqld_safe "${@:2}" 2>&1 >/dev/null | $ERR_LOGGER &
@@ -186,6 +193,13 @@ case "${1:-''}" in
   fi
   ;;
 
+  'bootstrap')
+	# Bootstrap the cluster, start the first node
+	# that initiates the cluster
+	log_daemon_msg "Bootstrapping the cluster" "mysqld"
+	$SELF start "${@:2}" --wsrep-new-cluster
+	;;
+
   *)
   echo "Usage: $SELF start|stop|restart|reload|force-reload|status"
   exit 1

debian/mariadb-server-10.5.postinst

@@ -18,17 +18,42 @@ ERR_LOGGER="logger -p daemon.err -t mariadb-server-$MAJOR_VER.postinst -i"
 # the install, rather than failing silently and leaving a broken install.
 set -o pipefail
 
-invoke() {
-  systemctl $1 mysql
-}
-
 case "$1" in
   configure)
-    # This is needed because mysql_install_db removes the pid file in /var/run
+    # This is needed because mysql_install_db removes the pid file in /run
     # and because changed configuration options should take effect immediately.
     # In case the server wasn't running at all it should be ok if the stop
-    # script fails. I can't tell at this point because of the cleaned /var/run.
-    set +e; invoke stop; set -e
+    # script fails. I can't tell at this point because of the cleaned /run.
+    set +e; invoke-rc.d mariadb stop; set -e
+
+    # An existing /etc/init.d/mysql might be on the system if there was a
+    # previous MySQL or MariaDB installation, since /etc/init.d files are
+    # considered config files and stay around even after the package is removed.
+    #
+    # The install step of this package adds a new /etc/init.d/mariadb file. As
+    # we also want to ensure that there are no old (and potentially outdated)
+    # versions of /etc/init.d/mysql we simply replace it using a copy of the
+    # latest 'mariadb' file. This has also the added benefit that anything that
+    # invokes traditional sysv init with either 'mysql' or 'mariadb' will end up
+    # controlling this newly installed MariaDB, and thus we maintain better
+    # backwards compatiblity.
+    #
+    # Note that the 'Provides' line is also updated to avoid 'insserv' exiting
+    # on failure (when it is run by update-rc.d) because of duplicate service
+    # names.
+    if [ -f "/etc/init.d/mysql" ] && [ -f "/etc/init.d/mariadb" ]
+    then
+      # Copy init file and rename the service name and filename on the fly
+      sed 's/Provides:          mariadb/Provides:          mysql/g' /etc/init.d/mariadb > /etc/init.d/mysql
+      # NOTE: Number of spaces/tabs is important here!
+      # Confirm if the sed worked
+      if ! grep --quiet "Provides:          mysql" /etc/init.d/mysql
+      then
+        # If not, then delete the file to avoid failures later on
+        rm -f /etc/init.d/mysql
+        echo "Warning! Failed creating a mysql named copy of mariadb init.d file"
+      fi
+    fi
 
     mysql_statedir=/usr/share/mysql
     mysql_datadir=/var/lib/mysql
@@ -126,7 +151,7 @@ EOF
 
     # initiate databases. Output is not allowed by debconf :-(
     # This will fail if we are upgrading an existing database; in this case
-    # mysql_upgrade, called from the /etc/init.d/mysql start script, will
+    # mysql_upgrade, called from the /etc/init.d/mariadb start script, will
     # handle things.
     # Debian: beware of the bashisms...
     # Debian: can safely run on upgrades with existing databases
@@ -187,8 +212,9 @@ EOF
   triggered)
     if [ -x "$(command -v systemctl)" ]; then
       systemctl daemon-reload
+    else
+      invoke-rc.d mariadb restart
     fi
-    invoke restart
   ;;
 
   *)
@@ -199,7 +225,7 @@ esac
 
 db_stop # in case invoke failes
 
-# dh_systemd_start doesn't emit anything since we still ship /etc/init.d/mysql.
+# dh_systemd_start doesn't emit anything since we still ship /etc/init.d/mariadb.
 # Thus MariaDB server is started via init.d script, which in turn redirects to
 # systemctl. If we upgrade from MySQL mysql.service may be masked, which also
 # means init.d script is disabled. Unmask mysql service explicitly.

debian/mariadb-server-10.5.postrm

@@ -13,20 +13,28 @@ MYADMIN="/usr/bin/mysqladmin --defaults-file=/etc/mysql/debian.cnf"
 
 # Try to stop the server in a sane way. If it does not success let the admin
 # do it himself. No database directories should be removed while the server
-# is running!
+# is running! Another mysqld in e.g. a different chroot is fine for us.
 stop_server() {
-  set +e
-  systemctl stop mysql
-  errno=$?
-  set -e
+    # Return immediately if there are no mysql processes running
+    # as there is no point in trying to shutdown in that case.
+    if ! pgrep -x mysqld > /dev/null; then return; fi
 
-  if [ "$?" != 0 ]; then
-    echo "Trying to stop the MySQL server resulted in exitcode $?." 1>&2
-    echo "Stop it yourself and try again!" 1>&2
-    exit 1
-  fi
+    set +e
+    invoke-rc.d mariadb stop
+    errno=$?
+    set -e
+
+    # systemctl could emit exit code 100=no init script (fresh install)
+    if [ "$errno" != 0 -a "$errno" != 100 ]; then
+      echo "Attempt to stop MariaDB/MySQL server returned exitcode $errno" 1>&2
+      echo "There is a MariaDB/MySQL server running, but we failed in our attempts to stop it." 1>&2
+      echo "Stop it yourself and try again!" 1>&2
+      db_stop
+      exit 1
+    fi
 }
 
+
 case "$1" in
   purge|remove|upgrade|failed-upgrade|abort-install|abort-upgrade|disappear)
     if [ -n "`$MYADMIN ping 2>/dev/null`" ]; then
@@ -74,7 +82,7 @@ if [ "$1" = "purge" ] && [ -f "/var/lib/mysql/debian-$MAJOR_VER.flag" ]; then
       # /var/lib/mysql is a mount point
       rmdir --ignore-fail-on-non-empty /var/lib/mysql || true
     fi
-    rm -rf /var/run/mysqld # this directory is created by the init script, don't leave behind
+    rm -rf /run/mysqld # this directory is created by the init script, don't leave behind
     userdel mysql || true
   fi
 

debian/mariadb-server-10.5.preinst

@@ -33,14 +33,14 @@ stop_server() {
     if ! pgrep -x --ns $$ mysqld > /dev/null; then return; fi
 
     set +e
-    systemctl stop mysql
+    invoke-rc.d mariadb stop
     errno=$?
     set -e
 
-    # 0=ok, 100=no init script (fresh install)
+    # systemctl could emit exit code 100=no init script (fresh install)
     if [ "$errno" != 0 -a "$errno" != 100 ]; then
-      echo "'systemctl stop mysql' returned $errno" 1>&2
-      echo "There is a MySQL server running, but we failed in our attempts to stop it." 1>&2
+      echo "Attempt to stop MariaDB/MySQL server returned exitcode $errno" 1>&2
+      echo "There is a MariaDB/MySQL server running, but we failed in our attempts to stop it." 1>&2
       echo "Stop it yourself and try again!" 1>&2
       db_stop
       exit 1

debian/rules

@@ -170,7 +170,7 @@ override_dh_systemd_enable:
 # Start mysql at sequence number 19 before 20 where apache, proftpd etc gets
 # started which might depend on a running database server.
 override_dh_installinit-arch:
-	#dh_installinit --name=mysql -- defaults 19 21
+	dh_installinit --name=mariadb --no-start -- defaults 19 21
 	dh_systemd_start --restart-after-upgrade