[FR] Configurations for all 3D printers and every possible permutation

[thinkyhead]

This is a catch-all for all "me too" configuration requests. If you can submit partly or fully working configs for printers we don't yet support, please do, as we rely on owners of machines to test and verify Marlin and provide well tuned configurations. Starting configurations can often be found in Marlin forks provided by manufacturers.

Prior requests (Last updated 22 Apr 2024)

• Alfawise U20 one
• Alfawise U20 Plus
• Anet E12
• AnyCubic 4Max Pro 2.0
• AnyCubic i3 Mega - Trigorilla AVR
• AnyCubic Kobra GO
• Creality CR-5 Pro H
• Creality CR-10S - BTT SKR Mini E3 V3.0
• Creality CR-10S Pro V2
• Creality CR-200B
• Creality CR-X
• Creality Ender 3 - Bricolemon Lite
• Creality Ender-3 - SKR 3 EZ
• Creality Ender 3 - SV06
• Creality Ender 3 Max Neo
• Creality Ender 3 Neo
• Creality Ender 3 Pro - BTT SKR E3 Turbo
• Creality Ender 3 Pro - BTT SKR Mini E3 V3, BTT TFT35 E3 V3
• Creality Ender 3 Pro - BTT SKR v1.3, CRTouch
• Creality Ender-3 S1
• Creality Ender 3 V2 - BTT SKR Mini E3 2.0
• Creality Ender-3 V2 - Creality 4.2.7 board, MarlinUI
• Creality Ender 3 V2 Neo - BTT SKR Mini E3 V3, BTT TFT35 3.0.1
• Creality Ender 3 V2 Neo - CRTouch / Sprite Pro
• Creality Ender 5 Plus - SKR 1.4 Turbo, 2209 and 2130's
• Creality Ender 6 - CRTouch
• Creality Ender 7
• Creality Ender S1 Plus
• Creality Ender S1 Pro
• Creality Sermoon D1
• Creality Sermoon V1
• CTC A8 - MKS Robin Nano V3.1
• DreamMaker Overlord Pro - 2.1 board
• Elegoo Neptune 3 max
• JGAurora A5
• Kingroon KP3S Pro
• MakerBot Replicator 2
• Mingda Magician X - (S) board
• Simax Mi-M200
• Sovol SV05
• Sovol SV06 Plus
• TronXY X5SA - CXY-V6-191121
• TronXY X5SA-400/500/600 Pro - CXY-V6-190319
• Tronxy X5SA-2E - V10 STM board
• Turnigy Fabrikator
• Two Trees SP-5 V3
• Vellemann K8200 - Direct Drive Extruder, Z-Axis Upgrade., RRDFG LCD
• Vertex Delta K8800 - UBL

[skilly00]

Anyone working on the Ender 3 S1? Lots of changes over earlier models and it has a new Board.

[ColinM9991]

This mightn't help at all but I figure it's worth sharing.

Several months back I took a cut of Jyer's Marlin fork and added a workflow to compile firmware for a SKR Mini E3 on the Ender 3 v2. Marlin can already natively support the SKR Mini E3 out of the box, with just a few configuration tweaks necessary.

Most changes are in the following commit

Individual tweaks are located in two additional commits on the following branch

[pichoncin37]

buenas , necesitaria ayuda para configurar la bricolemon lite en mi ender 3, no me imprime en el centro esta descuadrada la impresion, y el eje x intenta seguir hacia la izquierda aun estando el endstop

[walterp1982]

I'd like to request configuration for the Mingda Magician X with the (S) board. Please let me know if I can be of service.

[UKIkarus]

I'd like to request configuration for the Mingda Magician X with the (S) board. Please let me know if I can be of service.

Me too, I have this printer and I have the pinout provided by Mingda, if anyone can lend a hand I'll gladly grab any info I can from them to assist.

The motherboard chip is reportedly a "STM32F407ZET6"

BC.DZ.PC000007_PIN_info.txt
tft35.txt Does anyone know what make/model the TFT is exactly and can it be flashed independently?

Hope these help.

[robherc]

ahh, I misread thinky's last post

[bradstoik]

its a cr 5 not an ender 5. thank you for your reply. i will keep looking.

Didn't realize there was no config upstream for it, uses a known board. I have a config in my repo for it I can clean up and drop in.

That would be so helpful. Thanks a bunch. I'm hoping with a starting point I can learn my way threw this but without the config files I was in way over my head.

[PsychoOW]

This is a catch-all for all "me too" configuration requests.

hello, can you please add the configuration from a printer manufactured by Hobbyking which is called Turnigy Fabrikator?

https://github.com/PsychoOW/Turnigy-Fabrikator-Marlin-Firmware-Configuration

Unfortunatly there is not much good documentation and they deleted all firmware related stuff from their homepage. i struggled very hard to get a new firmware with correct configuration. i actually uploaded that particular marlin 2 firmware for the printer here on github in order to help other people out there. there is unfortunatly nothing anymore that runs "out of the box". i wrote about the situation in the readme. it would be really really awesome if you can include it! i worked very hard on it.

also i want to apologize if i had to do something like a fork or so. if you wish me to do so i comply of course. i purely uploaded it for "conservation" reasons to help others :)

[ellensp]

@PsychoOW please see PR #1010

[ama564]

Hey any configuration for Neptune 3 max.

[steverc1572]

The Creality CR-X configuration is missing

[MasterDenis]

I would like to request the configuration recommended for the Sovol SV06 Plus as it is also a very popular entry printer right now! Thanks!

[ellensp]

@MasterDenis the motherboard is supported, the sovol user interface is not in stock marlin. More is needed that just an updated config. But I have added it this to the list (in initial post)
The source is available https://github.com/Sovol3d/SV06-PLUS/tree/master/MarlinSV06Plus

[Blisk]

I am looking for configuration file for CR-10 MAX
Does anyone have it?

[ellensp]

@Blisk its a standard config provided by marlin https://github.com/MarlinFirmware/Configurations/tree/bugfix-2.1.x/config/examples/Creality/CR-10%20Max Only in bugfix currently.

[ellensp]

@Tinbum1 Two Trees SP-5 V3 Config files have been created, currently awaiting being checked and then they will be committed into Marlin Configurations See #1044

[Tinbum1]

@Tinbum1 Two Trees SP-5 V3 Config files have been created, currently awaiting being checked and then they will be committed into Marlin Configurations See #1044

Thank you but I can't seem to find it?

[ellensp]

@Tinbum1 Two Trees SP-5 V3 Config files have been created, currently awaiting being checked and then they will be committed into Marlin Configurations See #1044

Thank you but I can't seem to find it?

Click on the link. Click on files changed

It is not merged yet, so is only there or in my repo https://github.com/ellensp/Configurations/tree/add-SP-5-V3/config/examples/Two%20Trees/SP-5_V3

[Tinbum1]

Ah, thank you so much.

[inspectionsbybob]

I will add my voice to asking for a Trobxy X5SA-V10 STM config please.

[BIG-BRO-L]

Can you make a version for the: Creality Ender 3 V2 Neo - BTT SKR Mini E3 V3, But with the stock 4.3" Ender 3 V2 Neo LCD Screen? (I posted as an issue and not a comment on accident.) There is already a version for this printer and board but for the btt screen (#1032) , not the included stock screen. :)

[Cracoukas]

Is there anywhere a working configuration for a SKR SE-BX-V3.0 and BTT TFT70-BX-V3.0 ?
I can get it working in Marlin mode but no way to switch to the BigtreeTech Unified Menu Theme

[thisiskeithb]

Is there anywhere a working configuration for a SKR SE-BX-V3.0 and BTT TFT70-BX-V3.0 ?
I can get it working in Marlin mode but no way to switch to the BigtreeTech Unified Menu Theme

@Cracoukas: BTT’s UI was never ported upstream, so you have to use the existing TFT_COLOR_UI in the BX config if you want to use a current version of Marlin. If you prefer their UI, you have to stick with their outdated fork.

[Cracoukas]

Is there anywhere a working configuration for a SKR SE-BX-V3.0 and BTT TFT70-BX-V3.0 ?
I can get it working in Marlin mode but no way to switch to the BigtreeTech Unified Menu Theme

@Cracoukas: BTT’s UI was never ported upstream, so you have to use the existing TFT_COLOR_UI in the BX config if you want to use a current version of Marlin. If you prefer their UI, you have to stick with their outdated fork.

Yes, the pitty is that the outdated fork works only with V2.0 board but they sell V3.0 boards without support.
I suppose I will have to try Klipper to find out if it's any better

[kompumaster]

Hi!

Configuration "BOARD_CHITU3D_V6" is for old V6 board, based on f103 MCU. Tronxy Use it before 2022.

Is "TronXY X5SA - CXY-V6-191121" (based on STM32F446) and "CXY-446-V10-220413" are same boards? and can i use "BOARD_TRONXY_V10" on "V6-191121" board?

#446 V6-191121 has been discontinued. Please order high version #446 V10-220413 according to models, which are common for same models.

Want to try, but afraid it will be bricked =)

[kompumaster]

Try to compile "Configurations-release-2.1.2.3/config/examples/Tronxy/X5SA/" with
#define MOTHERBOARD BOARD_CHITU3D_V6

all ok, but this configuration for f103 MCU (before 2022),

Change it to
#define MOTHERBOARD BOARD_TRONXY_V10

Got correct f446 MCU, but this error on compiling:

from buildroot/share/PlatformIO/scripts/../../../../Marlin/src/inc/MarlinConfig.h:36, from buildroot/share/PlatformIO/scripts/common-dependencies.h:29: buildroot/share/PlatformIO/scripts/../../../../Marlin/src/inc/../pins/stm32f4/pins_TRONXY_V10.h:190:4: error: #error "TFT_TRONXY_X5SA is not yet supported." 190 | #error "TFT_TRONXY_X5SA is not yet supported." | ^~~~~ Error: Failed to parse Marlin features. See previous error messages.

😒😢

Some guy post pinout for this board here, may be somebody can help?

[kompumaster]

Tronxy Git with old Marlin's for this printers:
https://github.com/tronxy3d

May be import it to last Marlin?