Creatbot Violation of license terms

[ffnull]

Hello there. Im recently buy CreatBot f430 and found that this printer uses modified Marlin firmware. CreatBot won't provide sources and firmware. What we can do?

[coreyfaure]

It looks like this company is no stranger to either violating open-source licenses or just straight up ripping content from other websites. Case in point:
Original article: https://www.simplify3d.com/support/print-quality-troubleshooting/
Their FAQ: https://www.creatbot.com/en/faqs.html

There's probably not much that can be done with these Chinese companies. Naomi Wu had luck convincing Creality to respect the GPL after a lengthy explanation on what it is and how it would benefit the company to adhere to it, but there's nothing much stopping them from doing this kind of thing unfortunately.

[ffnull]

how can we punish them. and make source code available? сб, 13 июл. 2019 г., 19:52 coreyfaure <notifications@github.com>:

…

It looks like this company is no stranger to either violating open-source licenses or just straight up ripping content from other websites. Case in point: Original article: https://www.simplify3d.com/support/print-quality-troubleshooting/ Their FAQ: https://www.creatbot.com/en/faqs.html — You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub <#14614?email_source=notifications&email_token=AF6THEX25N5I6CZIS3WLKNLP7IB6LA5CNFSM4IC5LMXKYY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGODZ3VLEA#issuecomment-511137168>, or mute the thread <https://github.com/notifications/unsubscribe-auth/AF6THETCP75KFOJRSFJ3L33P7IB6LANCNFSM4IC5LMXA> .

[thisiskeithb]

how can we punish them.

We don’t buy their products 🙂

[OneOfEleven]

They have some lovely printers though, the mechanics of their machines look really nice.

[ffnull]

Im buy printer for 8000$ in my country. And it doesnt work good. I need source codes to fix. But manufacturer is asshole

[OneOfEleven]

There's probably not much that can be done with these Chinese companies. Naomi Wu had luck convincing Creality to respect the GPL after a lengthy explanation on what it is and how it would benefit the company to adhere to it, but there's nothing much stopping them from doing this kind of thing unfortunately.

All (chinese, western or where ever) companies use and rip open source code and use it in their products and never share anything, a lot of my open source code is being used in some rather high priced equipment, they never ask, never say, never mention, never share, they just use it, that's how companies are I'm afraid, the only thing they want is profit, nothing else matters.

Such is the human race.

[boelle]

yep, its not the first time i see a post like this and not the last either

the only way you could prevent this to prevent the firmware working if a license key is entered either with lcd or via seriel.

or if printer can phone home we could tell it to not work

but the most bullet proff way is just forget about it and go on, china does not give a rats arse about it

[boelle]

@ffnull

"Im buy printer for 8000$ in my country. And it doesnt work good. I need source codes to fix. But manufacturer is asshole"

send it back

[InsanityAutomation]

yep, its not the first time i see a post like this and not the last either

the only way you could prevent this to prevent the firmware working if a license key is entered either with lcd or via seriel.

or if printer can phone home we could tell it to not work

but the most bullet proff way is just forget about it and go on, china does not give a rats arse about it

It being open source, that is guaranteed to annoy users more than manufacturers who skirt the license. Theyll simply remove it. Itll slow down one of their developers for maybe a day.

[UAEChan]

Their machines have very good mechanics. It's not important that the code is open source and not . they will provide a variety of firmware if you want

[UAEChan]

I configure Marlin using the configuration tool, or command line

[ffnull]

Here to many futures that i cant provide while porting marlin 2. So without source code, i cant make port. пн, 15 июл. 2019 г., 10:22 UAEChan <notifications@github.com>:

…

I configure Marlin using the configuration tool, or command line — You are receiving this because you were mentioned. Reply to this email directly, view it on GitHub <#14614?email_source=notifications&email_token=AF6THEQ52BRPNHZBMUWWH53P7QQS3A5CNFSM4IC5LMXKYY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGODZ44SFI#issuecomment-511297813>, or mute the thread <https://github.com/notifications/unsubscribe-auth/AF6THEVUQJLKCBSKS6FS5BTP7QQS3ANCNFSM4IC5LMXA> .

[UAEChan]

@ffnull I can ask them for you, you want the pins list ?

[UAEChan]

marlin 2 have too many bugs

[ffnull]

Yes. Pin map will be good. And how the make usb flash over spi пн, 15 июл. 2019 г., 11:00 UAEChan <notifications@github.com>:

…

marlin 2 have too many bugs — You are receiving this because you were mentioned. Reply to this email directly, view it on GitHub <#14614?email_source=notifications&email_token=AF6THESIMULM5RKGWGEUTBLP7QVAZA5CNFSM4IC5LMXKYY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGODZ462EY#issuecomment-511307027>, or mute the thread <https://github.com/notifications/unsubscribe-auth/AF6THEXCI6C43QEQLG2O36TP7QVAZANCNFSM4IC5LMXA> .

[github-actions]

This issue has been automatically locked since there has not been any recent activity after it was closed. Please open a new issue for related bugs.