Type | Property | Description |
---|---|---|
string | IP | The IP address of the PS4. |
Process | ActiveProcess | The current active process to perform methods on. |
Function | Description |
---|---|
bool connect() | Connect to the PS4. Returns true/false depending on success |
void disconnect() | Disconnect from the PS4 |
bool attach(string processName) | Attach to the process with the process name. Returns true/false depending on success |
bool attach(Process process) | Attach to the given process. Returns true/false depending on success |
bool attach() | Attach to the process that is set via property AciveProcess. Returns true/false depending on success |
bool attachEboot() | Attach to the eboot process. Returns true/false depending on success |
void detach() | Detach from an attached process |
bool isConnected() | Returns true if the client is connected to the PS4, false otherwise |
bool isAttached() | Returns true if the client is attached to a process, false otherwise |
bool payload(byte[] payload) | Send the payload bytes to the PS4 |
Event | Description |
---|---|
ConnectedEvent | Raised when a PS4 has successfully connected |
DisconnectEvent | Raised when a PS4 has disconnected |
AttachedEvent | Raised when a process has successfully attached |
DetachedEvent | Raised when a process has detached |
GoEvent | Raised when a process resumes exectuion |
StoppedEvent | Raised when a process stops |
SteppedEvent | Raised when a process steps a single instruction |
KilledEvent | Raised when a process is killed |
TrappedEvent | Raised when a hits a breakpoint trap |
Function | Description |
---|---|
ErrorCode write(ulong address, T[] elements) | Generic function to write any data type array to the given address. |
ErrorCode write(ulong address, T element) | Generic function to write any data type to the given address. |
T[] read(ulong address, int elements, out ErrorCode error) | Generic function to read any data type array from the given address. The elements signifies the number of elements to read. |
T read(ulong address, out ErrorCode error) | Generic function to read any data type from the given address. |
ErrorCode search(ulong start, ulong end, T[] elements) | Search for the array of elements in a consecutive sequence in memory between the from and to address. |
ErrorCode search(ulong start, ulong end, T element) | Search for the element in memory between the from and to address. |
ErrorCode rescan(T[] elements) | Rescan the results from a previous search for the new array of elements in a consecutive sequence. |
ErrorCode rescan(T element) | Rescan the results from a previous search for the element. |
int getResultsCount() | Get the number of results found in the last search or rescan. |
ulong[] getResults() | Get an array of result addresses found in the last search or scan. |
ErrorCode endSearch() | End the last search / rescan and clean up allocated resources. |
Function | Description |
---|---|
List getProcesses(out ErrorCode error) | Get a list of all running processes on the PS4 |
List getProcessThreads(out ErrorCode error, int processId = -1) | Get a list of all running threads for a given process |
ErrorCode notify(string message) | Send a notification to the PS4 |
List getModules(out ErrorCode error) | Get a list of active modules on the PS4 |
List getRegions(out ErrorCode error) | Get a list of mapped memory regions for the current process. |
string getFirmware() | Get the current running firmware version. (Eg: "5.05") |
Function | Description |
---|---|
ErrorCode go() | Resume a stopped process |
ErrorCode stop() | Stop a process from running |
ErrorCode step() | Execute a single instruction |
ErrorCode kill() | Kill a process |
Registers getRegisters(out ErrorCode error) | Get the registers for the current state |
ErrorCode setRegisters(Registers regs) | Set the registers for the current state |
ErrorCode resetHardwareBreakpoint(int index) | Clear the hardware breakpoint. (Index must be 0-3) |
ErrorCode resetHardwareBreakpoints(int[] indexes) | Clear the hardware breakpoints. (Index must be 0-3) |
ErrorCode setHardwareBreakpoint(HardwareBreakpoint breakpoint) | Set the hardware breakpoint. |
void setHardwareBreakpoints(List breakpoints) | Set the hardware breakpoints. |
API.IP = "192.168.0.31"
if (API.connect())
{
API.notify("Hello world!");
}
API.ErrorCode error;
API.IP = "192.168.0.31"
if (API.connect() && API.attachEboot())
{
int value = API.read<int>(0x400000, out error); // Read 1 Int
int[] values = API.read<int>(0x400000, 3, out error); // Read 3 Ints
string message = API.read<string>(0x400000, out error); // Read string
API.write<string>(0x400000, "Hello world!"); // Write string
API.write<float>(0x400000, new float[] { 1.0f, 0.5f, 2.5f }); // Write float array
}