A script to support voice tracking in mAirlist with the Behringer CMD MM-1 MIDI controller
written by Henning "McCavity" Halfpap
inspired by the script "Behringer cmd LC-1" written by Thomas "Kloppi"
Kloppholz
see: https://github.com/Lexorius/Mairlist-Behringer-Controller/blob/\
master/Behringer-CMD-LC-1.txt
Copyright 2014 Henning Halfpap
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.
Installation instructions:
1. Place the file „Behringer_CMD_MM-1.mls“ in your mAirlist script
folder (e.g. C:\Program Files\mAirlist\scripts)
2. Edit the script and set DEBUG to 'true'
3. Run the script once from mAirlist. Open mAirlist's System Log and
note the device number of your Controller.
4. Edit the script again and set mAirlistDevice to the number you just
noted.
5. Run the script once again from mAirlist. All buttons should start
blinking blue & the VU meters should light up approximately 2/3. If
this doesn't happen, maybe your devices uses a different MIDI channel.
You can either cycle through the edit / run sequence each time
modifying the MIDI channel number until you find the correct setting
or use Behringer's App (download from Behringer's product page) to
determine / set the correct MIDI channel. In any case, edit this
script to reflect the correct MIDI channel number.
6. Edit the script to set DEBUG to 'false'
7. (Optional) Run this script once again with DEBUG set to 'false' if
the test mode was on. This resets test mode.
8. Set up the scrip as a Notification Script in mAirlist