HeadpatVR firmware

Firmware for ESP8266 microcontroller to accept signals over WiFi network and move servo motors

Works with HeadpatVR server that accepts OSC signals from VRChat

Prerequisites

You need PlatformIO IDE to compile and upload it to your esp8266 controller Installation instructions can be found here: https://platformio.org/install/ide?install=vscode

Configuration

Create the file local.ini with the following parameters:

[wifi]
SSID = your-wifi-ssid
PASSWORD = YourWifi#Pa$$W0Rd

replace your-wifi-ssid and YourWifi#Pa$$W0Rd to your wifi SSID and password

Build and upload

You can find the "Build" and "Upload" buttons in the bottom bar Once local.ini file is ready, click on "Build". Once the build process is finished, click on "Upload" Once the upload is finished, you can click on "Serial monitor" button to see the logs