title | description | ms.topic | ms.date |
---|---|---|---|
Event replication task patterns - Azure Event Hubs | Microsoft Docs |
This article provides detail guidance for implementing specific event replication task patterns |
article |
09/28/2021 |
The federation overview and the replicator functions overview explain the rationale for and the basic elements of replication tasks, and it's recommended that you familiarize yourself with them before continuing with this article.
In this article, we detail implementation guidance for several of the patterns highlighted in the overview section.
The Replication pattern copies events from one Event Hub to the next, or from an Event Hub to some other destination like a Service Bus queue. The events are forwarded without making any modifications to the event payload.
The implementation of this pattern is covered by the Event replication between Event Hubs and Event replication between Event Hubs and Service Bus samples and the Use Apache Kafka MirrorMaker with Event Hubs tutorial for the specific case of replicating data from an Apache Kafka broker into Event Hubs.
Replication, either through Azure Functions or Azure Stream Analytics, doesn't aim to assure the creation of exact 1:1 clones of a source Event Hub into a target Event Hub, but focuses on preserving the relative order of events where the application requires it. The application communicates this by grouping related events with the same partition key and Event Hubs arranges messages with the same partition key sequentially in the same partition.
Important
The "offset" information is unique for each Event Hub and offsets for the same events will differ across Event Hub instances. To locate a position in a copied event stream, use time-based offsets and refer to the propagated service-assigned metadata.
Time-based offsets start your receiver at a specific point in time:
- EventPosition.FromStart() - Read all retained data again.
- EventPosition.FromEnd() - Read all new data from the time of connection.
- EventPosition.FromEnqueuedTime(dateTime) - All data starting from a given date and time.
In the EventProcessor, you set the position through the InitialOffsetProvider on the EventProcessorOptions. With the other receiver APIs, the position is passed through the constructor.
The pre-built replication function helpers provided as samples that are used in the Azure Functions based guidance ensure that event streams with the same partition key retrieved from a source partition are submitted into the target Event Hub as a batch in the original stream and with the same partition key.
If the partition count of the source and target Event Hub is identical, all streams in the target will map to the same partitions as they did in the source. If the partition count is different, which matters in some of the further patterns described in the following, the mapping will differ, but streams are always kept together and in order.
The relative order of events belonging to different streams or of independent events without a partition key in a target partition may always differ from the source partition.
The service-assigned metadata of an event obtained from the source Event Hub, the original enqueue time, sequence number, and offset, are replaced by new service-assigned values in the target Event Hub, but with the helper functions, replication tasks that are provided in our samples, the original values are preserved in user properties: repl-enqueue-time
(ISO8601 string),
repl-sequence
, repl-offset
.
Those properties are of type string and contain the stringified value of the respective original properties. If the event is forwarded multiple times, the service-assigned metadata of the immediate source is appended to the already existing properties, with values separated by semicolons.
If you're using replication for disaster recovery purposes, to protect against regional availability events in the Event Hubs service, or against network interruptions, any such failure scenario will require performing a failover from one Event Hub to the next, telling producers and/or consumers to use the secondary endpoint.
For all failover scenarios, it's assumed that the required elements of the namespaces are structurally identical, meaning that Event Hubs and Consumer Groups are identically named and that shared access signature rules and/or role-based access control rules are set up in the same way. You can create (and update) a secondary namespace by following the guidance for moving namespaces and omitting the cleanup step.
To force producers and consumers to switch, you need to make the information about which namespace to use available for lookup in a location that is easy to reach and update. If producers or consumers encounter frequent or persistent errors, they should consult that location and adjust their configuration. There are numerous ways to share that configuration, but we point out two in the following: DNS and file shares.
One candidate approach is to hold the information in DNS SRV records in a DNS you control and point to the respective Event Hub endpoints.
Important
Mind that Event Hubs doesn't allow for its endpoints to be directly aliased with CNAME records, which means you'll use DNS as a resilient lookup mechanism for endpoint addresses and not to directly resolve IP address information.
Assume you own the domain example.com
and, for your application, a zone
test.example.com
. For two alternate Event Hubs, you'll now create two
further nested zones, and an SRV record in each.
The SRV records are, following common convention, prefixed with
_azure_eventhubs._amqp
and hold two endpoint records: One for AMQP-over-TLS on
port 5671 and one for AMQP-over-WebSockets on port 443, both pointing to the Event Hubs endpoint of the namespace corresponding to the zone.
Zone | SRV record |
---|---|
eh1.test.example.com |
_azure_servicebus._amqp.eh1.test.example.com 1 1 5671 eh1-test-example-com.servicebus.windows.net 2 2 443 eh1-test-example-com.servicebus.windows.net |
eh2.test.example.com |
_azure_servicebus._amqp.eh2.test.example.com 1 1 5671 eh2-test-example-com.servicebus.windows.net 2 2 443 eh2-test-example-com.servicebus.windows.net |
In your application's zone, you will then create a CNAME entry that points to the subordinate zone corresponding to your primary Event Hub:
CNAME record | Alias |
---|---|
eventhub.test.example.com |
eh1.test.example.com |
Using a DNS client that allows for querying CNAME and SRV records explicitly (the built-in clients of Java and .NET only allow for simple resolution of names to IP addresses), you can then resolve the desired endpoint. With DnsClient.NET, for instance, the lookup function is:
static string GetEventHubName(string aliasName)
{
const string SrvRecordPrefix = "_azure_eventhub._amqp.";
LookupClient lookup = new LookupClient();
return (from CNameRecord alias in (lookup.Query(aliasName, QueryType.CNAME).Answers)
from SrvRecord srv in lookup.Query(SrvRecordPrefix + alias.CanonicalName, QueryType.SRV).Answers
where srv.Port == 5671
select srv.Target).FirstOrDefault()?.Value.TrimEnd('.');
}
The function returns the target host name registered for port 5671 of the zone currently aliased with the CNAME as shown above.
Performing a failover requires editing the CNAME record and pointing it to the alternate zone.
The advantage of using DNS, and specifically Azure DNS, is that Azure DNS information is globally replicated and therefore resilient against single-region outages.
This procedure is similar to how the Event Hubs Geo-DR works, but fully under your own control and also works with active/active scenarios.
The simplest alternative to using DNS for sharing endpoint information is to put the name of the primary endpoint into a plain-text file and serve the file from an infrastructure that is robust against outages and still allows updates.
If you already run a highly available web site infrastructure with global availability and content replication, adding such a file there and republish the file if a switch is needed.
Caution
You should only publish the endpoint name in this way, not a full connection string including secrets.
For Event Hub consumers, further considerations for the failover strategy depend on the needs of the event processor.
If there is a disaster that requires rebuilding a system, including databases, from backup data, and the databases are fed directly or via intermediate processing from the events held in the Event Hub, you will restore the backup and then want to start replaying events into the system from the moment at which the database backup was created and not from the moment the original system was destroyed.
If a failure only affects a slice of a system or indeed only a single Event Hub, which has become unreachable, you will likely want to continue processing events from about the same position where processing was interrupted.
To realize either scenario and using the event processor of your respective Azure SDK, you will create a new checkpoint store and provide an initial partition position, based on the timestamp that you want to resume processing from.
If you still have access to the checkpoint store of the Event Hub you're switching away from, the propagated metadata discussed above will help you to skip events that were already handled and resume precisely from where you last left off.
The merge pattern has one or more replication tasks pointing to one target, possibly concurrently with regular producers also sending events to the same target.
Variations of these patters are:
- Two or more replication functions concurrently acquiring events from separate sources and sending them to the same target.
- One more replication function acquiring events from a source while the target is also used directly by producers.
- The prior pattern, but mirrored between two or more Event Hubs, resulting in those Event Hubs containing the same streams, no matter where events are produced.
The first two pattern variations are trivial and don't differ from plain replication tasks.
The last scenario requires excluding already replicated events from being replicated again. The technique is demonstrated and explained in the EventHubToEventHubMerge sample.
The editor pattern builds on the replication pattern, but messages are modified before they are forwarded.
Examples for such modifications are:
- Transcoding - If the event content (also referred to as "body" or "payload") arrives from the source encoded using the Apache Avro format or some proprietary serialization format, but the expectation of the system owning the target is for the content to be JSON encoded, a transcoding replication task will first deserialize the payload from Apache Avro into an in-memory object graph and then serialize that graph into the JSON format for the event that is being forwarded. Transcoding also includes content compression and decompression tasks.
- Transformation - Events that contain structured data may require reshaping of that data for easier consumption by downstream consumers. This may involve work like flattening nested structures, pruning extraneous data elements, or reshaping the payload to exactly fit a given schema.
- Batching - Events may be received in batches (multiple events in a single transfer) from a source, but have to be forwarded singly to a target, or vice versa. A task may therefore forward multiple events based on a single input event transfer or aggregate a set of events that are then transferred together.
- Validation - Event data from external sources often need to be checked for whether they're in compliance with a set of rules before they may be forwarded. The rules may be expressed using schemas or code. Events that are found not to be in compliance may be dropped, with the issue noted in logs, or may be forwarded to a special target destination to handle them further.
- Enrichment - Event data coming from some sources may require enrichment with further context for it to be usable in target systems. This may involve looking up reference data and embedding that data with the event, or adding information about the source that is known to the replication task, but not contained in the events.
- Filtering - Some events arriving from a source might have to be withheld from the target based on some rule. A filter tests the event against a rule and drops the event if the event doesn't match the rule. Filtering out duplicate events by observing certain criteria and dropping subsequent events with the same values is a form of filtering.
- Cryptography - A replication task may have to decrypt content arriving from the source and/or encrypt content forwarded onwards to a target, and/or it may have to verify the integrity of content and metadata relative to a signature carried in the event, or attach such a signature.
- Attestation - A replication task may attach metadata, potentially protected by a digital signature, to an event that attests that the event has been received through a specific channel or at a specific time.
- Chaining - A replication task may apply signatures to streams of events such that the integrity of the stream is protected and missing events can be detected.
The transformation, batching, and enrichment patterns are generally best implemented with Azure Stream Analytics jobs.
All those patterns can be implemented using Azure Functions, using the Event Hubs Trigger for acquiring events and the Event Hub output binding for delivering them.
The routing pattern builds on the replication pattern, but instead of having one source and one target, the replication task has multiple targets, illustrated here in C#:
[FunctionName("EH2EH")]
public static async Task Run(
[EventHubTrigger("source", Connection = "EventHubConnectionAppSetting")] EventData[] events,
[EventHub("dest1", Connection = "EventHubConnectionAppSetting")] EventHubClient output1,
[EventHub("dest2", Connection = "EventHubConnectionAppSetting")] EventHubClient output2,
ILogger log)
{
foreach (EventData eventData in events)
{
// send to output1 and/or output2 based on criteria
EventHubReplicationTasks.ConditionalForwardToEventHub(input, output1, log, (eventData) => {
return ( inputEvent.SystemProperties.SequenceNumber%2==0 ) ? inputEvent : null;
});
EventHubReplicationTasks.ConditionalForwardToEventHub(input, output2, log, (eventData) => {
return ( inputEvent.SystemProperties.SequenceNumber%2!=0 ) ? inputEvent : null;
});
}
}
The routing function will consider the message metadata and/or the message payload and then pick one of the available destinations to send to.
In Azure Stream Analytics, you can achieve the same with defining multiple outputs and then executing a query per output.
select * into dest1Output from inputSource where Info = 1
select * into dest2Output from inputSource where Info = 2
The log projection pattern flattens the event stream onto an indexed database, with events becoming records in the database. Typically, events are added to the same collection or table, and the Event Hub partition key becomes part of the primary key looking for making the record unique.
Log projection can produce a time-series historian of your event data or a compacted view, whereby only the latest event is retained for each partition key. The shape of the target database is ultimately up to you and your application's needs. This pattern is also referred to as "event sourcing".
Tip
You can easily create log projections into Azure SQL Database and Azure Cosmos DB in Azure Stream Analytics, and you should prefer that option.
The following Azure Function projects the contents of an Event Hub compacted into an Azure Cosmos DB collection.
[FunctionName("Eh1ToCosmosDb1Json")]
[ExponentialBackoffRetry(-1, "00:00:05", "00:05:00")]
public static async Task Eh1ToCosmosDb1Json(
[EventHubTrigger("eh1", ConsumerGroup = "Eh1ToCosmosDb1", Connection = "Eh1ToCosmosDb1-source-connection")] EventData[] input,
[CosmosDB(databaseName: "SampleDb", collectionName: "foo", ConnectionStringSetting = "CosmosDBConnection")] IAsyncCollector<object> output,
ILogger log)
{
foreach (var ev in input)
{
if (!string.IsNullOrEmpty(ev.SystemProperties.PartitionKey))
{
var record = new
{
id = ev.SystemProperties.PartitionKey,
data = JsonDocument.Parse(ev.Body),
properties = ev.Properties
};
await output.AddAsync(record);
}
}
}