Error: './targets/s2mini/manifest.json': manifest not found!

[ptunstall]

I am trying to build to the s2mini but I get this error when I try:

cd $MODDABLE/examples/helloworld
mcconfig -d -m -p esp32/s2mini 
### Error: './targets/s2mini/manifest.json': manifest not found!

I am not sure what i'm doing wrong. I am able to flash to other esp32 devices just fine. I've followed these two pages:

https://github.com/Moddable-OpenSource/moddable/blob/idf-v5/documentation/Moddable%20SDK%20-%20Getting%20Started.md

https://github.com/Moddable-OpenSource/moddable/blob/idf-v5/documentation/Moddable%20SDK%20-%20Getting%20Started.md#dev-boards-and-mcus

I am working on OSX M1 if that means anything.

[mkellner]

The s2mini was renamed to lolin_s2mini.
Please use the target esp32/lolin_s2mini.

I will fix the documentation.

[ptunstall]

That did it! LEDs blink!

Is there a special workflow for MCUs that have this manual bootloader/reset situation like the s2mini? It flashes fine but it fails right after:

Writing at 0x0006d797... (95 %)
Writing at 0x0006e575... (96 %)
Writing at 0x0006fe41... (97 %)
Writing at 0x00071629... (98 %)
Writing at 0x00072192... (99 %)
Writing at 0x00072d38... (100 %)
Wrote 406752 bytes (239189 compressed) at 0x00010000 in 4.3 seconds (effective 749.8 kbit/s)...
Hash of data verified.
Compressed 3072 bytes to 83...
Writing at 0x00008000... (100 %)
Traceback (most recent call last):
  File "<frozen runpy>", line 198, in _run_module_as_main
  File "<frozen runpy>", line 88, in _run_code
  File "/Users/pattontunstall/.espressif/python_env/idf5.1_py3.11_env/lib/python3.11/site-packages/esptool/__main__.py", line 9, in <module>
    esptool._main()
  File "/Users/pattontunstall/.espressif/python_env/idf5.1_py3.11_env/lib/python3.11/site-packages/esptool/__init__.py", line 1101, in _main
    main()
  File "/Users/pattontunstall/.espressif/python_env/idf5.1_py3.11_env/lib/python3.11/site-packages/esptool/__init__.py", line 912, in main
    esp.soft_reset(True)  # exit stub back to ROM loader
    ^^^^^^^^^^^^^^^^^^^^
  File "/Users/pattontunstall/.espressif/python_env/idf5.1_py3.11_env/lib/python3.11/site-packages/esptool/loader.py", line 1446, in soft_reset
    self.flash_finish(True)
  File "/Users/pattontunstall/.espressif/python_env/idf5.1_py3.11_env/lib/python3.11/site-packages/esptool/loader.py", line 882, in flash_finish
    self.check_command("leave Flash mode", self.ESP_FLASH_END, pkt)
  File "/Users/pattontunstall/.espressif/python_env/idf5.1_py3.11_env/lib/python3.11/site-packages/esptool/loader.py", line 439, in check_command
    val, data = self.command(op, data, chk, timeout=timeout)
                ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  File "/Users/pattontunstall/.espressif/python_env/idf5.1_py3.11_env/lib/python3.11/site-packages/esptool/loader.py", line 426, in command
    self._port.timeout = saved_timeout
    ^^^^^^^^^^^^^^^^^^
  File "/Users/pattontunstall/.espressif/python_env/idf5.1_py3.11_env/lib/python3.11/site-packages/serial/serialutil.py", line 372, in timeout
    self._reconfigure_port()
  File "/Users/pattontunstall/.espressif/python_env/idf5.1_py3.11_env/lib/python3.11/site-packages/serial/serialposix.py", line 524, in _reconfigure_port
    self._set_special_baudrate(custom_baud)
  File "/Users/pattontunstall/.espressif/python_env/idf5.1_py3.11_env/lib/python3.11/site-packages/serial/serialposix.py", line 225, in _set_special_baudrate
    fcntl.ioctl(self.fd, IOSSIOSPEED, buf, 1)
OSError: [Errno 83] Device error
Wrote 3072 bytes (83 compressed) at 0x00008000 in 0.1 seconds (effective 323.6 kbit/s)...
Hash of data verified.

Leaving...
Staying in bootloader.
CMake Error at run_serial_tool.cmake:66 (message):
  
  /Users/pattontunstall/.espressif/python_env/idf5.1_py3.11_env/bin/python;;/Users/pattontunstall/esp32/esp-idf-v5.1.1/components/esptool_py/esptool/esptool.py;--chip;esp32s2
  failed.



FAILED: CMakeFiles/flash /Users/pattontunstall/Projects/moddable/build/tmp/esp32/lolin_s2mini/debug/helloworld/xsProj-esp32s2/build/CMakeFiles/flash 
cd /Users/pattontunstall/esp32/esp-idf-v5.1.1/components/esptool_py && /Users/pattontunstall/.espressif/tools/cmake/3.24.0/CMake.app/Contents/bin/cmake -D IDF_PATH=/Users/pattontunstall/esp32/esp-idf-v5.1.1 -D "SERIAL_TOOL=/Users/pattontunstall/.espressif/python_env/idf5.1_py3.11_env/bin/python;;/Users/pattontunstall/esp32/esp-idf-v5.1.1/components/esptool_py/esptool/esptool.py;--chip;esp32s2" -D "SERIAL_TOOL_ARGS=--before=default_reset;--after=no_reset;write_flash;@flash_args" -D WORKING_DIRECTORY=/Users/pattontunstall/Projects/moddable/build/tmp/esp32/lolin_s2mini/debug/helloworld/xsProj-esp32s2/build -P /Users/pattontunstall/esp32/esp-idf-v5.1.1/components/esptool_py/run_serial_tool.cmake
ninja: build stopped: subcommand failed.
ninja failed with exit code 1, output of the command is in the /Users/pattontunstall/Projects/moddable/build/tmp/esp32/lolin_s2mini/debug/helloworld/xsProj-esp32s2/build/log/idf_py_stderr_output_21724 and /Users/pattontunstall/Projects/moddable/build/tmp/esp32/lolin_s2mini/debug/helloworld/xsProj-esp32s2/build/log/idf_py_stdout_output_21724
make: *** [all] Error 2

[mkellner]

If you're at this state, you can use the xsbug build target like: mcconfig -d -m -p esp32/lolin_s2mini -t xsbug.

The s2mini requires a reset before it can connect to xsbug. The command above sets up the xsbug connection and will prompt you to press reset on the device.

Failing out of the install like that is not optimal. I'll see if it can be improved.

[ptunstall]

This works GREAT! Ok cool I can do everything now with the s2mini! Super thank you!!

[phoddie]

Cool! Please Select "Mark as Answer" on @mkellner's reply so that others will know that this is solved. Thank you.