Firmware for CC2533 programmer - based on Benito serial firmware - driven by CCLoad program
C C++ Makefile Other
Switch branches/tags
Nothing to show
Clone or download
Fetching latest commit…
Cannot retrieve the latest commit at this time.
Permalink
Failed to load latest commit information.
Benito7g.xcodeproj
MyUSB
.DS_Store
._.DS_Store
._Benito7g.c
._Benito7g.inf
._Descriptors.c
._Descriptors.h
._MyUSB
Benito7g.c
Benito7g.h
Benito7g.inf
Descriptors.c
Descriptors.h
Makefile
README.md
RingBuff.c
RingBuff.h
copy.s
cvt-file.c
dmacode.c
load
mkcopy
runavarice.sh

README.md

HBase

Firmware for CC2533 programmer - based on Benito serial firmware - driven by CCLoad program

// CC2533 programmer code // // (c) Copyright 2012 Paul Campbell paul@taniwha.com // // Released under the LGPL Licence, Version 3 /*---------------------------------------------------------------Benito7g.c The benito7g is an AT90USB162 based board produced by tempusdictum. This firmware turns the benito7 into a usb to serial converter with a 2ms pulse instead of the DTR signal. This is designed to reset microcontrollers with serial bootloaders.

Based on BenitoSerial.c CopyLeft 2008 Donald Delmar Davis (don@digithink.com) based on USBtoSerial.[c-h] MyUSB Library Copyright (C) Dean Camera, 2008. dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com Released under the LGPL Licence, Version 3 -------------------------------------------------------------------------------*/

To load code into a programmer:

  • 'make' here to build a binary
  • erase the programmer (short the 'D7' pins, then short the 'RESET' pins, remove the shorts)
  • run the "load" script here (you will need the dfu-programmer tools)
  • unplug the programmer and plug it back in