You signed in with another tab or window. Reload to refresh your session.You signed out in another tab or window. Reload to refresh your session.You switched accounts on another tab or window. Reload to refresh your session.Dismiss alert
This commit was created on GitHub.com and signed with GitHub’s verified signature.
The key has expired.
THINGS TO DO BEFORE UPDATING
If you are updating from a previous version (i.e. v3.11), back up your controller before updating (you can always revert the firmware back). Preset and bank data will be retained but currently, controller settings data will be reset.
THINGS TO DO AFTER UPDATING
Re-calibrate expression pedal
Check new features in Controller Settings >> General Config (default MIDI clock ports)
Check new features in Controller Settings >> MIDI Channel (MIDI channel ports and channel remap)
If you have issues with the center bank colours, please connect to editor and check the bank color settings
v3.12.9 Update
Fix issue with WIDI Jack connecting to editor via bluetooth when using the 3.5mm MIDI Ports
v3.12.8 Update
Some users still reported the LCD issue. This release should fix most, if not all, occurrences.
Fix expression waveform and sequencer speed bug
v3.12.7 Update
Fix bug in Resistor ladder aux switch
There is a behaviour on a small number of devices where the right-most LCD randomly fails to boot up. This firmware fixes the issue.
v3.12.6 Update
Regression
Fix bug in Resistor ladder aux switch after optimisation
v3.12.5 Update
Bug Fixes
Fix MIDI Clock Port Select bug
v3.12.4 Update
Bug Fixes
Fix Tap Tempo bug in MIDI Clock menu
Re-enable jump to same bank feature
Remove engage preset limit when running in sequence
Fix MIDI clock port select new feature initialisation
Fix issue where Exp on engage/disengage is not triggering for message index more than 16
Fix issue where Exp % was displaying even when no omniport is set for Exp
v3.12.3 Update
Bug Fixes
Fix jump to last bank issue
Fix load last used bank on startup
Fix USB Host hanging issue
v3.12.2 Update
Bug Fixes
Fix external MIDI Tap bug
Fix PC bank recall when in custom bank arrangement bug
Fix resistor ladder bug
Changes
Removed MIDI Clock and CC Waveform timeout feature when in editor mode
v3.12.1 Update
New Features
Bank Settings can now set bank colorus
2023-11-10 Bank Jump selection in editor for Aux Switch
2023-11-10 Page Toggle message type for Bank Presets
Select default output port for each MIDI channel (under Controller Settings >> MIDI Channel settings)
Add omniport setting for Resistor Ladder aux switch
Controller settings: Screensaver time setting in Controller settings
Controller settings: Define ports to send MIDI clock to
Allow Omniport to use a Rheostat style expression pedal (defined in Exp calibration)
MIDI CC implementation for relay port control
Add serial port communication with editor
MIDI CC implementation to trigger LCD display alert for user to test MIDI Input
Enhancements
Set toggle to shift state will update names and colours immediately when action is executed
Page toggle by CC implementation has to additional options to jump to specific page, page up/down etc.
Add default relay port setting in editor controller settings
Add ML10X message type to Bank Presets
Update function switch placement in tap tempo clock menu
Add MIDI communication timeout when controller is communicating with the editor. Persistent MIDI from Clock or CC (waveform etc) affects SysEx comms
Reset MIDI clock tap tempo average number of taps after 5 second timeout
With addition of Page up/down functions, Toggle page will now toggle between 1 and 2.
MIDI Thru message type has no effect for the MC6 PRO
Improved expression calibration
Improved sensitivity handling for Expression
When screensaver is ON, the next switch press should not trigger any function
Add MIDI Clock handle to USB Host port (currently, USB Host cannot handle incoming MIDI clock)
More page options for bank jump and toggle page message type, and fixed switch custom settings. Page Up/Down and jump to page. Toggle page will toggle between page 1 and page 2.
Bug Fixes
REGRESSION Fixed ommniport aux switch T+R not working
Initialise MIDI outputs immediately on bootup
Scroll counter wrap around should start from minimum or maximum
MIDI Clock + sending multiple expression CC messages causes controller to hang
Double Tap Release is not triggered by Release All
Fix jump to last use bank/page bug
Sequencer invert function should start from beginning. Currently, it starts from where it left off.
Fractal Integration should use Fractal MIDI channel. Currently, it is using the MC's MIDI channel.
MC6 PRO Page Scroll dual switch is scrolling too fast
MIDI Clock decimal places not working for Bank Presets
Fix jump to last use bank/page bug
Double tap action executing when press action is held down slightly longer
Double tap release engaging randomly when only Release is triggered
Cascading engage preset calls hangs device
+-1 BPM utility message executing but not updating BPM value on LCD screen
PC Scroll doesn't work when max value is set to 1 or 2
Controller sequencer not sending missing last value if length is set to 16
Controller needs to be restarted after saving new Sequencer values in order for new values to load
Fixed switch custom Page up/down not loading the new pages
When using custom Bank arrangement, selected bank from engage preset message type or bank jump should point to default bank arrangement.
Fix long double tap action
Data backup bug
Page refresh issue which causes users to scroll past intended bank when scrolling through banks by holding down switches
Incoming MIDI clock jitters when other type of MIDI messages are received.
MIDI messages sent is delayed when MIDI clock messages are being received
USB Host port issue sending MIDI to multiple connected devices
Waveform Generator 3 - max value bug
Exp value disappears after exp stops moving
Only MIDI clock should trigger BPM calculation. Currently, any MIDI real time message will
Fixed MIDI Clock read issue in 3.5mm MIDI IN port
LCDs are initialised before booting up completely, causing static display sometimes
Bank preset Delay message delay time is wrong
Fix data communication issue when creating backup, resulting in missing preset data
Exp issue where value might jump from 0% to 100% when exp is set to heel down below lower limit threshold