Firmware v3.12.6

PLEASE READ

BEFORE UPDATING…

1. If updating from an earlier firmware version (i.e. v3.11), back up your controller before updating (you can always revert the firmware back). Preset and bank data will be retained but currently, controller settings data will be reset.

AFTER UPDATING…

1. Re-calibrate expression pedal
2. Check new features in Controller Settings >> General Config (default MIDI clock ports)
3. Check new features in Controller Settings >> MIDI Channel (MIDI channel ports and channel remap)

v3.12.6 Update

Bug Fixes

• Fix bug in Resistor ladder aux switch

v3.12.5 Update

Bug Fixes

• Fix MIDI Clock port select bug
• Fix bug in Resistor ladder aux switch after optimisation

v3.12.4 Update

Bug Fixes

• Fix Tap Tempo bug in MIDI Clock menu
• Re-enable jump to same bank
• Remove engage preset limit when running in sequence
• Fix MIDI clock port select new feature initialisation

v3.12.3 Update

Bug Fixes

• Fix MIDI Clock menu tap tempo issue
• Fix jump to last bank issue
• Fix load last used bank on startup

v3.12.2 Update

Bug Fixes

• Fix external MIDI Tap bug
• Fix PC bank recall when in custom bank arrangement bug
• Fix resistor ladder bug

Changes

• Removed MIDI Clock and CC Waveform timeout feature when in editor mode

v3.12.1 Update

New Features

• Add Bank jump for TRS aux switch
• Page Toggle message type for Bank Presets

• Feature to remap MIDI channels in MIDI Channel setting (under Controller Settings >> MIDI Channel settings)
• Feature to Select default output port for each MIDI channel (under Controller Settings >> MIDI Channel settings)
• Add omniport setting for Resistor Ladder aux switch (max 8 switches)
• Controller settings: Define which ports to send MIDI clock to
• Allow Omniport to use a Rheostat style expression pedal (defined in Exp calibration)
• Add serial port communication with editor
• MIDI CC implementation to trigger LCD display alert for user to test MIDI Input

Enhancements

• Add ML10X message type to Bank Presets

• Add MIDI communication timeout when controller is communicating with the editor. Persistent MIDI from Clock or CC (waveform etc) affects SysEx comms
• Reset MIDI clock tap tempo average number of taps after 5 second timeout
• Improved expression calibration
• Improved sensitivity handling for Expression
• When screensaver is ON, the next switch press should not trigger any function

Bug Fixes

• REGRESSION Fix aux switch T+R bug
• Fixed MIDI Output start up initialisation bug
• [BUG] Fractal Integration should use Fractal MIDI channel. Currently, it is using the MC's MIDI channel.
• [BUG] Sequencer invert function should start from beginning. Currently, it starts from where it left off.
• [BUG] Double Tap Release is not triggered by Release All
• Exp issue where value might jump from 0% to 100% when exp is set to heel down below lower limit threshold

• MIDI Clock decimal places not working for Bank Presets

• Double tap action executing when press action is held down slightly longer
• Double tap release engaging randomly when only Release is triggered
• PC Scroll doesn't work when max value is set to 1 or 2
• Controller sequencer not sending missing last value if length is set to 16
• Controller needs to be restarted after saving new Sequencer values in order for new values to load
• When using custom Bank arrangement, selected bank from engage preset message type or bank jump should point to default bank arrangement.
• Fix long double tap action
• Data backup bug
• Page refresh issue which causes users to scroll past intended bank when scrolling through banks by holding down switches
• MIDI messages sent is delayed when MIDI clock messages are being received
• Waveform Generator 3 - max value bug
• Only MIDI clock should trigger BPM calculation. Currently, any MIDI real time message will
• Fix data communication issue when creating backup, resulting in missing preset data

Firmware v3.11.1

Please read

• PLEASE BACK UP YOUR CONTROLLER DATA FIRST BEFORE UPDATING
• Requires Editor v1.3.x
  • If you are using the Web Editor, the latest version can always be found at https://editor.morningstar.io
• If the updated firmware does not work for you for any reason, please note that you can revert back to the previous firmware version
  • The links to the compatible editors for specific firmware versions are available at the bottom of the Editor page.

How to update your firmware

• The hex file is the file that needs to be uploaded into the controller. It is not meant to be opened in your computer.
• You need to use the Firmware Updater Software available in our Downloads page to upload the hex file to the controller.
• More info here

Bug Fixes

• Fixed Incoming PC number to change bank does not respect custom bank sequence when it is enabled
• Fixed %BP placeholder does not refresh when incoming MIDI clock BPM changes. Currently, a refresh is only triggered when a switch is pressed.
• Fixed Using a Trigger Message message type to engage a Utility Manage Preset Scroll message type will hang the controller
• Fixed Incoming PC number that is more than the number of banks available changes Bank to 1.
• Fixed Preset message scroll display bug
• Fixed Exp read bug when switch is held down
• Fixed Bug in MC8 which prevents MC8 from communicating with editor via WIDI Jack

New features

1. Preset rename message type

   • Temporarily rename your preset short name (up to 4 characters only). This allows you to display more dynamic information about the state of your preset. For example, if you have a Release action set to send a CC message to bypass your pedal, and Long Press to engage your pedal, you can add a Preset Rename message type for each action to display Byps and Enge.
   • This will work for message scroll as well, where you can add a Preset Name message type after each message and then set the controller to scroll through 2 messages. The example below sends PC#4, PC#5 and PC#6 and also displays PC4, PC5 and PC6.

2. Add Preset options for Omniport Fixed Switch Custom setting.

• Trigger selected presets with your aux switch

Firmware v3.10.2

Please read

• PLEASE BACK UP YOUR CONTROLLER DATA FIRST BEFORE UPDATING
• Requires Editor v1.3.x
  • If you are using the Web Editor, the latest version can always be found at https://editor.morningstar.io
• If the updated firmware does not work for you for any reason, please note that you can revert back to the previous firmware version
  • The links to the compatible editors for specific firmware versions are available at the bottom of the Editor page.

How to update your firmware

• The hex file is the file that needs to be uploaded into the controller. It is not meant to be opened in your computer.
• You need to use the Firmware Updater Software available in our Downloads page to upload the hex file to the controller.
• More info here

Changelog

Please see here

Bug Fixes in v3.10.2

• Fixed bug where Msg16 does not execute when Msg Scroll is used
• Fixed issue with Omniport MIDI Out Type B setting
• Fixed race condition when controlling MC externally via MIDI
• Fixed Cross MIDI Thru bug when using virtual USB MIDI Port
• Fixed full name display for MC3 and MC6
• Fixed Load Last Used Bank on Startup bug when custom bank sequence is used
• Fixed on Engage and on Disengage preset events when engaging Presets with CC messages
• Fixed Bank Change bug where wrong bank is loaded when using Bank Up or Bank Down message type with with Custom Bank Sequence turned on
• Fixed issue with Note messages being sent on Omniport

Firmware v3.9.7

Please read

• PLEASE BACK UP YOUR CONTROLLER DATA FIRST BEFORE UPDATING

• There is a bug related to the Bank Presets when updating from the v3.8 firmware, which causes it to load wrongly.

  • Solution: After backing up your data in v3.8, update the firmware to v3.9, and then reload your data in v3.9.

• Requires Editor v1.2.1

  • If you are using the Desktop Editor, you need to download the latest editor version
  • If you are using the Web Editor, the latest version can always be found at https://editor.morningstar.io

How to update your firmware

• The hex file is the file that needs to be uploaded into the controller. It is not meant to be opened in your computer.
• You need to use the Firmware Updater Software available in our Downloads page to upload the hex file to the controller.
• More info here

Breaking changes

These settings in your controller needs to be checked due to some feature changes

• CC Value Scroll messages need to be reconfigured
• Presets with SysEx messages needs to be re-created as there is an addition of 1 field which allows you to send longer SysEx messages

Changelog

Please see here

v3.8.8

Firmware files can be found at the bottom of the section

Breaking changes

Please review these points and make changes to your workflow if necessary

1. %E and %F placeholders in the preset names will no longer display the Counter values from the PC Scroll Up and PC Scroll Down message types. It has been updated to reflect the counter values in the controller settings, which can be used with the new PC Number Scroll and CC Value Scroll message types

2. Waveform generator in has been updated with extended features in v3.8. If you are using the Waveform Generator in v3.7, please review and update your Preset message.

Other Information

• The file with a NO_KEYBOARD_USB_INTERFACE suffix means that that firmware excludes the USB Keyboard feature. This means that the firmware does not have they Keystroke function
  • MIDI interfaces like the iConnectivity MIOXM cannot connect to a MIDI + Keyboard interface. More info here.
  • If you are facing such issues, please use this file.
• If you are having troubles after uploading the firmware, please refer to this.

Changelog

Firmware v3.8.8

Bug Fix

• NOTE: There was a bug related to the expression port introduced in the file dated 2021-07-30. This is fixed in the file dated 2021-08-02
• FIXED - issue where Note messages do not get sent via TRS MIDI OUT

Firmware v3.8.7

Bug Fixes

• Fixed Waveform Generator Stop All bug

Firmware v3.8.6

• Just one thing: Added incoming MIDI clock integration. Incoming MIDI clock signals will set internal MIDI Clock BPM so Waveform/Sequence generators can sync to incoming MIDI Clock BPM.
  • Incoming MIDI Clock BPM will be displayed on the LCD, but will not blink. BPM display will only blink when MIDI clock is being generated by the controller

Firmware v3.8.5

New features

• Integration with Editor Settings in Editor v1.1.5
  • Selecting Load data using Switch Press in the Editor Settings will allow you to load data into the editor using switch presses, but some functions will be blocked (bank up/down etc) in the controller. Turning the setting OFF will not block any setting, but pressing the controller switches will not load data into the Editor. You need to select the preset from the editor dropdown box instead.

Changes

• Improved MIDI Clock handling
  • More accurate MIDI clock thru
  • Turning ignore MIDI clock setting on will now just have the controller completely ignore MIDI clock and not pass it thru.
  • Incoming MIDI clock signals will no longer set internal MIDI clock. It will just get passed directly thru if the MIDI Thru settings are turned on

Bug fixes

• Fixed Keystroke bug where multiple modifiers are not detected
• Fixed MIDI Clock menu bug introduced in v3.8.4
• Fixed issue with Sequencer where engines 1 & 2 follows same BPM

Firmware v3.8.4

Important changes in v3.8.4

• When editing in the editor, pressing a switch on the controller no longer loads data into the editor. To select a preset in the editor, click on the Preset label on the Top Right of the editor, which will display a drop down box to select the preset to edit.
  • With the above change, you no longer need to exit editor mode when you want to test the controller

Changes

• All Editor Mode blocks are removed. All features can run in editor mode. No more checking if you have exited editor mode.
• Loading of Preset data into the editor will no longer be done with switch presses, but only via the Editor drop-down menu.
• MIDI Clock Menu will not trigger MIDI Clock upon entering of menu. There is now a start option to start the MIDI Clock
• If Ignore MIDI Clock setting is ON, MIDI Clock will be passed thru directly if MIDI Thru settings are ON. If Ignore MIDI Clock is OFF, incoming MIDI Clock will set the internal BPM.

Bug fixes

• FIXED - Bank Up/Down message type executes within the preset, which causes the wrong sequence to run
  • For example, if Bank Up is programmed in Bank 1 Preset A Msg 4, it will execute and then Msg 5 onwards will run on Bank 2 Preset A instead.
• FIXED - When uploading SysEx data for all banks if the custom bank sequence is active, it will upload according to the custom bank sequence, which causes confusion. Uploading SysEx data now only runs on the default bank sequence
• FIXED - Bank Change Mode triggers Bank Presets when scrolling through banks.
• FIXED - Bug on the MC6 Omniport 2 Edit menu where it is not possible to scroll past MIDI RING
• FIXED - Sending PC messages above PC#29 will trigger Bank Presets without changing banks
• FIXED - Long Press action does not activate MIDI Clock menu
• FIXED - Using any text after placeholder (%E0 etc) does not appear. For example, %E0-PRE will not display -PRE

Firmware v3.8.3

Changes

• If MIDI Clock Tap tempo menu is engaged, the MIDI Clock will not start (if it is not running) until the Start button is pressed.
• Waveform and Sequencer Cycle Multiplier setting will now only multiply the Cycles per minute, and will not generate additional waveforms when using Once Only.

Bug fixes

• Minor bug fixes

Firmware v3.8.2

Improvements

• Paste Preset to all Banks integration with editor
  • Triple click on Paste Preset to paste to all banks

Bug fixes

• Fixed Keyboard modifier bug
  • Having multiple keyboard modifiers do not work. Only modifier2 will be used and modifier1 will be ignored.
• Fixed Stop All Waveforms bug
  • Stop All command for CC Waveform does not stop all engines

Firmware v3.8.1

New features

• Added Looper Mode MIDI Implementation
  • CC#7
    • Value 0: Toggle
    • Value 1: Engage
    • Value 2: Disengage
• Added MIDI Clock Tap Tempo MIDI Implementation
  • CC#8
• Added MIDI Clock message type for bank presets
• Added Ignore MIDI Clock setting in Controller Settings
• Added USB MIDI Clock handle
• Added Fixed Switch Custom setting for Exp Input settings
  • Set specific functions for your aux switch
• Added new Keystroke message type
• Send keyboard commands to your computer
• Added Preset Re-arrangement feature in Editor
• Added "Use MIDI Clock BPM" option for Waveform Generator and Sequencer
• Added PC Multi Channel message
  • Send PC messages to selected MIDI channels with 1 message
• Added CC Scroll message
  • Scroll through CC Values within a specified range.
• Added CC Sequencer Generator feature
  • Run up to 2 sequencers that generates selected CC values
• Improved CC Waveform Generator feature
  • Up to 4 Waveform generators can be run
  • Min, Max and Type is set in the Controller Settings
  • Changed to Cycles Per Minute instead of Milliseconds
• Added new TRS MIDI Out options the Omniports
  • Options are:
    • MIDI OUT (original option that is linked to the internal jumpers)
    • MIDI STD (Standard MIDI TRS)
    • MIDI Tip Active (Data on Tip, Ring unpowered
    • MIDI Ring Active (Data on Ring, Tip unpowered).
• Added integration with the new Bank Arrangement feature on the editor
• Added Engage and Disengage events for Expression Presets to send PC and CC messages on those events
• Added MIDI Song Select message type
• Added Engage Preset to Bank Preset Messages
• Added Looper Mode, PC Scroll Up and PC Scroll Down to Bank Presets
• Added Kemper Tuner functionality

Improvements

• USB MIDI IN for CC, PC and Note messages will be re-sent out via USB MIDI
  • For ease of use when using the Editor Msg function and mapping functions in Ableton and other DAWs
• Added option for PC messages to send to all MIDI Channels.
• Added option for Set Toggle message type to have a "Toggle" option, on top of the current "Engage" and "Disengage".
  • The Toggle option allows you to toggle the selected presets relative to their current toggle position.
• Removed restriction for Bank Jump which prevents it from jumping to the same bank.
• Improved MIDI Clock thru handling via DIN5 MIDI Input. Incoming MIDI Clock sets the internal MIDI Clock BPM.

Changes

• Using Bank Jump to jump to the same bank will not change the Last Used Bank number
• Updated the Delay message type to 10ms increments
• Booting up the device will execute the ON ENTER event for Bank Presets for Bank 1

Redundant features

• PC Scroll Up / PC Scroll Down message types has been replaced with PC Number Scroll message type

Bug fixes

• Fixed issue with Select Exp message on the Bank Preset
• Fixed Preset Message Scroll %G display bug
• Fixed Preset Message Scroll bug
• Fixed MIDI Thru message bug
• Fixed loading from Bank Dump bug

Firmware v3.7.4

Important

Please do a "Reset Bank Preset" (RstBkPst) in the Global Configuration Menu after updating to this firmware. This will initialise the bank presets

Please use the new Firmware Uploader v0.9.1 if you are updating to the firmware dated 2020-08-16 or later. The device will not be detected by the old Firmware Updater once you do the firmware update on the MC6MKII.

Updating the firmware will not affect your data, but please consider doing a data backup before updating.

The USB Vendor ID in this release is updated, so you might need to reconfigure your settings in any USB software that you are using like Ableton or IConnectivity

v3.7.4

Bug Fix

• (2020-10-18) Fixed issue where loading a Bank Dump file resulted it in writing to Bank 1 no matter what the current bank is.
• (2020-10-18) Fixed issue with Preset Message Scroll

v3.7.2

Bug Fix

• (2020-09-24) Fixed issue where the Write function on Strymon Nixie does not work when using the MC8 as an interface
• (2020-09-24) Fixed issue where Set Toggle does not work with Bank Presets

v3.7.1

New Features

• (2020-09-14) Updated to allow the MC8 to be used an a USB MIDI Interface with Strymon Nixie
  • Set MC8 MIDI Thru to OFF
  • Set MC8 Cross MIDI Thru to ON
  • Set Strymon device MIDI Thru to MERGE
• (2020-09-14) Decoupled MIDI Thru (MIDI IN to MIDI OUT) with Cross MIDI Thru (USB MIDI TO MIDI OUT and MIDI IN TO USB MIDI OUT)
  • Settings are available in the global config menu as
    • MidiThru
    • CrsMdTru (Cross Midi Thru)
• (2020-09-13) Added 16 MIDI Messages for Bank changes.
  • You can send MIDI messages when you enter or exit a bank
  • Please do a "Reset Bank Preset" in the global configuration menu if updating into this version. This will reset all the values for the Bank Presets.
• Added Preset Message Scroll mode
  • Setting available in the Preset Edit menu on the device only.
  • If set to ON, the preset will increment through the list of 16 messages with RELEASE action in the preset
  • For example, if you have Msg 1, 2 and 3 programmed with a RELEASE action and Preset Message Scroll mode is ON, on first
    RELEASE, only Msg 1 will be executed. On the next RELEASE, Msg 2 will be executed. On the next RELEASE, Msg 3 will be executed. It will then loop back to Msg 1.
  • (2020-07-27) Added functionality to Web Editor
• Added MIDI Song Position message type
• Set MIDI BPM clock with CC messages.
  • CC#5 sets the MSB of the BPM
  • CC#6 sets the LSB of the BPM
  • Total 9 bits (7 bits LCB and 2 bit MSB)
• (2020-08-02) Added "%G" placeholder in short name to complement the Message Scroll feature. This placeholder shows which of the 16 messages are active when the Message Scroll feature is being used.
• (2020-08-03) Added Long Press Scroll action type, which allows you to loop through messages in a preset
• (2020-08-05) Updated to work with the Editor Select Preset function
• (2020-08-10) Added CC Waveform Generator
  • Available Waveforms:
    • Linear Up Once
    • Linear Down once
    • Linear Up Perpetual
    • Sine Up Once
    • Sine Down once
    • Sine Up Perpetual
    • Sawtooth Up Perpetual
    • Sawtooth Down Perpetual
  • Only 1 Waveform generator is available in the device. That means that you can only have 1 CC message being generated at any time.
  • CC Values are fixed from 0 to 127.
  • The interval parameter is the time (in Milliseconds) it takes from through to peak or peak to through. If the interval setting is 1000ms, and if you have selected Linear Up Once, that means that it takes 1 second for the CC Value to send from 0 to 127.
  • Interval has to be between 500ms and 12700ms.
• (2020-08-12) Connect to the Editor wirelessly via WIDI Master
  • MIDI Thru must be disabled first in order for this to work
• (2020-08-16) Added CC implementation for Expression 1, 2, 3 and 4. Send CC#51, CC#52, CC#53 and CC#54 to control Expression Presets 1, 2, 3, and 4 respectively.
• (2020-08-26) Added new Engage Preset message type
  • Trigger presets from other banks with this type
  • Limited to max 2 per preset
  • (2020-08-30) Engage Preset now engages the toggle of the preset it is calling if the called preset Preset Toggle is on.
  • (2020-09-09) Engage Preset will not engage Bank Up, Bank Down, Bank Change Mode and Toggle Page messages in the preset

Improvements

• Variable scrolling speed when editing parameters in the device.
• Added option for Bank Jump to jump to a different bank + page
• Added new option for PC Scroll placeholder
  • %E0 displays the number in the preset name from 0-127 (standard feature)
  • %F0 displays the number from 1-128. This is an offset of 1 from the standard 0-127. (new feature)

Bug Fixes

• (2020-08-02) Fixed issue when copying preset and pasting to all banks results in the controller hanging
• (2020-08-02) Add preset swap option in Preset Edit menu
• (2020-08-29) Fix bug with Omniport Fixed Sw 2 setting
• (2020-09-06) Fix bug where if device is on Page 2 and receives a PC message, it changes bank but the page displayed is not in sync with the actual page.
• (2020-09-09) Fixed issue with Engage Preset message type where calling a preset with a Set Toggle message will cause it to hang.
• (2020-09-18) Fixed issue where a Release event will not be triggered even thought there are no other types of Release events in the preset.

Changes

• (2020-08-12) Numbers in the %E and %F placeholders have changed from 0-15 to 0-F. The count goes like this:
  • 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, A, B, C, D, E, F

Firmware v3.6.3

Important

• Please re-programme your Omni-ports when updating from firmwares before v3.6.x

v3.6.3

Bug fixes

• Fixed issue where switch sensitivity was not returning to normal after exiting looper mode
• Fixed issue where Preset name was not changing when engaging it with CC messages.

v3.6.2

Bug Fixes

• Fixed issue where page was not refreshing when changing banks with PC and CC messages
• Fixed issue where Omniport settings were changing when using PC Scroll messages

v3.6.1

New Features

• Added FixedSw2 option for the Aux Switch Input, with which Bank Up and Down positions are opposite from FixedSw1.

• Added Preset Swapping

  • Which swaps the current active preset/expression preset with the last copied preset/expresion preset.

• After copying and pasting preset information from the editor, the editor now reflects the latest updates without you needing to press the switch again.

• Added Bank Swapping

  • Swap your last copied bank with your current bank. Bank Arranger must be off for this to work.

• You can now edit your controller global settinsgs with the Staging Editor, which now has a ‘Controller Settings’ page.

• Added Live View Mode

  • Your phone,tablet or computer can now mirror your MIDI controller and be used as a larger external display. Go to https://live-view.morningstar.io to access this feature.

• You can now decide if preset toggle states are reset or remembered across banks when you change banks.

• Expression Toe Down Toggle CC and Toe Down Toggle Channel will now work with CC Toe Down and CC Heel Down.

Improvements

• Improved memory write algo

Changes

• Renamed Set Bank to Bank Jump

Firmware v3.5.1

New Features

• Added Bank Arranger Module to allow re-arrangement of Banks. More info [here].(https://morningstarengineering.atlassian.net/wiki/spaces/MC6MKII/pages/38535169/Bank+Arranger+Module)
• Made LCD Text Alignment for short name optional. Can be edited in the Global Config Menu.
• Added dual switch press lock. This option locks the bank up/down and toggle page functions on A+B, B+C and C+D. Can be edited in the Global Config Menu.
• Added MIDI Thru to USB MIDI and vice versa for Pitch Bend messages
• Added MIDI Thru to USB MIDI and vice versa for After Touch messages
• Added option for Bank SysEx Dump. Currently this option is available only in the staging web editor https://editor-mkii-staging.morningstar.io/

Other changes

• Removed redundant Edit Action menu for Expression Presets
• Speed up preset/exp copy to all banks
• Reduced boot-up time
• Fix issue with device hanging sometimes when powered on. When power cycling your unit, please wait for a 5 seconds after power down before powering up to allow time for the capacitors to discharge.

Bug Fixes

• Fixed LCD printing issue in previous release.

Firmware v3.4.3

Bug Fixes

• Fixed issue where Press action did not toggle preset
• Fixed issue where copying expression presets to all banks led to unexpected results.
• Fixed issue in MIDI Clock tap menu where pressing DOWN changed the number too quickly
• Fixed issue with AxeFX Tuner
• 2020-02-11: Fixed issue with sending SysEx messages

Changes

• Presets will now only toggle when an action that is programmed is triggered. For example, if you have a Preset programmed with only Long Press and Double Tap actions, executing a Press action will not toggle the preset.
• When Expr pedal is used, Expr Long Name printed on LCD will revert back to Preset Long Name 1 second after Expression stops.
• Updated the main page interface for a more compact look
  • Added BPM display feature. When MIDI clock is ON, the BPM will be indicated on the screen, and blink along to tempo.
  • Consolidated Bank and Page information to show as B01 P1 for Bank One Page One.
  • Updated Preset information to show as PST A for Preset A.

New Features

• Added new Expression messages
  • Toe Down Toggle Channel: User can change the channel of a selected expression message by toggling between two values
  • Toe Down Toggle CC: User can change the CC Number of a selected expression message by toggling between two values
• Preset Name Auto Align

Improvements

• Improved MIDI Clock Tap algorithm
• Improved LCD printing algorithm

Firmware v3.4.2

Bug fixes

• Omniports 3 and 4 not calling the correct presets I, J, K and L, M, N
• FixedSw1 not working
• Optimised Setup Time
• Optmised Heel/Toe down expression reads

Changes

• If preset toggle is set to ON, the preset will not toggle by default when switch is pressed. An action and message needs to be executed in order for the preset to toggle.