Add dynamic library support

Makefile.in

@@ -25,6 +25,7 @@ DNSTAP_SRC=@DNSTAP_SRC@
 DNSTAP_OBJ=@DNSTAP_OBJ@
 DNSCRYPT_SRC=@DNSCRYPT_SRC@
 DNSCRYPT_OBJ=@DNSCRYPT_OBJ@
+WITH_DYNLIBMODULE=@WITH_DYNLIBMODULE@
 WITH_PYTHONMODULE=@WITH_PYTHONMODULE@
 WITH_PYUNBOUND=@WITH_PYUNBOUND@
 PY_MAJOR_VERSION=@PY_MAJOR_VERSION@
@@ -87,6 +88,12 @@ LINTFLAGS+="-D__uint16_t=uint16_t" "-DEVP_PKEY_ASN1_METHOD=int" "-D_RuneLocale=i
 
 INSTALL=$(SHELL) $(srcdir)/install-sh
 
+DYNLIBMOD_SRC=dynlibmod/dynlibmod.c
+DYNLIBMOD_OBJ=@DYNLIBMOD_OBJ@
+DYNLIBMOD_HEADER=@DYNLIBMOD_HEADER@
+DYNLIBMOD_EXTRALIBS=@DYNLIBMOD_EXTRALIBS@
+
+
 #pythonmod.c is not here, it is mentioned by itself in its own rules,
 #makedepend fails on missing interface.h otherwise.
 PYTHONMOD_SRC=pythonmod/pythonmod_utils.c
@@ -139,7 +146,7 @@ autotrust.lo val_anchor.lo \
 validator.lo val_kcache.lo val_kentry.lo val_neg.lo val_nsec3.lo val_nsec.lo \
 val_secalgo.lo val_sigcrypt.lo val_utils.lo dns64.lo cachedb.lo redis.lo authzone.lo \
 $(SUBNET_OBJ) $(PYTHONMOD_OBJ) $(CHECKLOCK_OBJ) $(DNSTAP_OBJ) $(DNSCRYPT_OBJ) \
-$(IPSECMOD_OBJ) $(IPSET_OBJ) respip.lo
+$(IPSECMOD_OBJ) $(IPSET_OBJ) $(DYNLIBMOD_OBJ) respip.lo
 COMMON_OBJ_WITHOUT_UB_EVENT=$(COMMON_OBJ_WITHOUT_NETCALL) netevent.lo listen_dnsport.lo \
 outside_network.lo
 COMMON_OBJ=$(COMMON_OBJ_WITHOUT_UB_EVENT) ub_event.lo
@@ -326,7 +333,7 @@ libunbound.la:	$(LIBUNBOUND_OBJ_LINK)
 	$(LINK_LIB) $(UBSYMS) -o $@ $(LIBUNBOUND_OBJ_LINK) -rpath $(libdir) $(SSLLIB) $(LIBS)
 
 unbound$(EXEEXT):	$(DAEMON_OBJ_LINK) libunbound.la
-	$(LINK) -o $@ $(DAEMON_OBJ_LINK) $(EXTRALINK) $(SSLLIB) $(LIBS)
+	$(LINK) -o $@ $(DAEMON_OBJ_LINK) $(EXTRALINK) $(SSLLIB) $(LIBS) $(DYNLIBMOD_EXTRALIBS)
 
 unbound-checkconf$(EXEEXT):	$(CHECKCONF_OBJ_LINK) libunbound.la
 	$(LINK) -o $@ $(CHECKCONF_OBJ_LINK) $(EXTRALINK) $(SSLLIB) $(LIBS)
@@ -453,6 +460,7 @@ clean:
 	rm -f unbound$(EXEEXT) unbound-checkconf$(EXEEXT) unbound-host$(EXEEXT) unbound-control$(EXEEXT) unbound-anchor$(EXEEXT) unbound-control-setup libunbound.la unbound.h
 	rm -f $(ALL_SRC:.c=.lint)
 	rm -f _unbound.la libunbound/python/libunbound_wrap.c libunbound/python/unbound.py pythonmod/interface.h pythonmod/unboundmodule.py
+	rm -f libunbound.a
 	rm -rf autom4te.cache .libs build doc/html doc/xml
 
 realclean: clean
@@ -622,6 +630,7 @@ depend:
 			-e 's?$$(srcdir)/pythonmod/pythonmod.h?$$(PYTHONMOD_HEADER)?g' \
 			-e 's?$$(srcdir)/edns-subnet/subnetmod.h $$(srcdir)/edns-subnet/subnet-whitelist.h $$(srcdir)/edns-subnet/edns-subnet.h $$(srcdir)/edns-subnet/addrtree.h?$$(SUBNET_HEADER)?g' \
 			-e 's?$$(srcdir)/ipsecmod/ipsecmod.h $$(srcdir)/ipsecmod/ipsecmod-whitelist.h?$$(IPSECMOD_HEADER)?g' \
+			-e 's?$$(srcdir)/dynlibmod/dynlibmod.h?$$(DYNLIBMOD_HEADER)?g' \
 			-e 's!\(.*\)\.o[ :]*!\1.lo \1.o: !g' \
 			> $(DEPEND_TMP)
 	cp $(DEPEND_TARGET) $(DEPEND_TMP2)
@@ -783,7 +792,7 @@ modstack.lo modstack.o: $(srcdir)/services/modstack.c config.h $(srcdir)/service
  $(srcdir)/services/view.h $(PYTHONMOD_HEADER) $(srcdir)/ipsecmod/ipsecmod.h \
  $(srcdir)/edns-subnet/subnetmod.h $(srcdir)/util/alloc.h $(srcdir)/util/net_help.h \
  $(srcdir)/util/storage/slabhash.h $(srcdir)/edns-subnet/addrtree.h $(srcdir)/edns-subnet/edns-subnet.h \
- $(srcdir)/ipset/ipset.h
+ $(srcdir)/ipset/ipset.h $(srcdir)/dynlibmod/dynlibmod.h
 view.lo view.o: $(srcdir)/services/view.c config.h $(srcdir)/services/view.h $(srcdir)/util/rbtree.h \
  $(srcdir)/util/locks.h $(srcdir)/util/log.h $(srcdir)/services/localzone.h $(srcdir)/util/storage/dnstree.h \
  $(srcdir)/util/module.h $(srcdir)/util/storage/lruhash.h $(srcdir)/util/data/msgreply.h \
@@ -865,7 +874,8 @@ fptr_wlist.lo fptr_wlist.o: $(srcdir)/util/fptr_wlist.c config.h $(srcdir)/util/
  $(srcdir)/libunbound/unbound-event.h $(srcdir)/libunbound/worker.h $(srcdir)/sldns/sbuffer.h \
  $(srcdir)/util/config_file.h $(srcdir)/respip/respip.h $(PYTHONMOD_HEADER) \
  $(srcdir)/ipsecmod/ipsecmod.h $(srcdir)/edns-subnet/subnetmod.h $(srcdir)/util/net_help.h \
- $(srcdir)/edns-subnet/addrtree.h $(srcdir)/edns-subnet/edns-subnet.h $(srcdir)/ipset/ipset.h
+ $(srcdir)/edns-subnet/addrtree.h $(srcdir)/edns-subnet/edns-subnet.h $(srcdir)/ipset/ipset.h \
+ $(srcdir)/dynlibmod/dynlibmod.h
 locks.lo locks.o: $(srcdir)/util/locks.c config.h $(srcdir)/util/locks.h $(srcdir)/util/log.h
 log.lo log.o: $(srcdir)/util/log.c config.h $(srcdir)/util/log.h $(srcdir)/util/locks.h $(srcdir)/sldns/sbuffer.h
 mini_event.lo mini_event.o: $(srcdir)/util/mini_event.c config.h $(srcdir)/util/mini_event.h
@@ -1072,6 +1082,14 @@ dnstap.lo dnstap.o: $(srcdir)/dnstap/dnstap.c  config.h $(srcdir)/sldns/sbuffer.
  dnstap/dnstap.pb-c.h
 dnstap.pb-c.lo dnstap.pb-c.o: dnstap/dnstap.pb-c.c dnstap/dnstap.pb-c.h \
 
+dynlibmod.lo dynlibmod.o: $(srcdir)/dynlibmod/dynlibmod.c config.h $(srcdir)/dynlibmod/dynlibmod.h \
+ $(srcdir)/util/module.h $(srcdir)/util/storage/lruhash.h $(srcdir)/util/locks.h $(srcdir)/util/log.h \
+ $(srcdir)/util/data/msgreply.h $(srcdir)/util/data/packed_rrset.h $(srcdir)/util/data/msgparse.h \
+ $(srcdir)/sldns/pkthdr.h $(srcdir)/sldns/rrdef.h $(srcdir)/util/rbtree.h\
+ $(srcdir)/util/storage/dnstree.h $(srcdir)/util/fptr_wlist.h $(srcdir)/util/netevent.h \
+ $(srcdir)/dnscrypt/dnscrypt.h  $(srcdir)/util/tube.h \
+ $(srcdir)/services/mesh.h $(srcdir)/services/modstack.h $(srcdir)/util/regional.h $(srcdir)/util/net_help.h \
+ $(srcdir)/util/config_file.h $(srcdir)/services/cache/dns.h $(srcdir)/sldns/wire2str.h
 ipsecmod.lo ipsecmod.o: $(srcdir)/ipsecmod/ipsecmod.c config.h $(srcdir)/ipsecmod/ipsecmod.h \
  $(srcdir)/util/module.h $(srcdir)/util/storage/lruhash.h $(srcdir)/util/locks.h $(srcdir)/util/log.h \
  $(srcdir)/util/data/msgreply.h $(srcdir)/util/data/packed_rrset.h $(srcdir)/util/data/msgparse.h \

config.h.in

@@ -836,6 +836,9 @@
 /* Define if you want Python module. */
 #undef WITH_PYTHONMODULE
 
+/* Define if you want dynamic library module. */
+#undef WITH_DYNLIBMODULE
+
 /* Define if you want PyUnbound. */
 #undef WITH_PYUNBOUND
 

configure

@@ -697,6 +697,10 @@ PYTHON_LDFLAGS
 PYTHON_CPPFLAGS
 PYTHON
 PYTHON_VERSION
+DYNLIBMOD_EXTRALIBS
+DYNLIBMOD_HEADER
+DYNLIBMOD_OBJ
+WITH_DYNLIBMODULE
 PTHREAD_CFLAGS_ONLY
 PTHREAD_CFLAGS
 PTHREAD_LIBS
@@ -851,6 +855,7 @@ enable_alloc_nonregional
 with_pthreads
 with_solaris_threads
 with_syslog_facility
+with_dynlibmodule
 with_pyunbound
 with_pythonmodule
 enable_swig_version_check
@@ -1607,6 +1612,8 @@ Optional Packages:
   --with-solaris-threads  use solaris native thread library.
   --with-syslog-facility=LOCAL0 - LOCAL7
                           set SYSLOG_FACILITY, default DAEMON
+  --with-dynlibmodule     build dynamic library module, or
+                          --without-dynlibmodule to disable it. (default=no)
   --with-pyunbound        build PyUnbound, or --without-pyunbound to skip it.
                           (default=no)
   --with-pythonmodule     build Python module, or --without-pythonmodule to
@@ -17123,6 +17130,34 @@ cat >>confdefs.h <<_ACEOF
 _ACEOF
 
 
+# Check for dynamic library module
+
+# Check whether --with-dynlibmodule was given.
+if test "${with_dynlibmodule+set}" = set; then :
+  withval=$with_dynlibmodule;
+else
+   withval="no"
+fi
+
+
+if test x_$withval != x_no; then
+
+$as_echo "#define WITH_DYNLIBMODULE 1" >>confdefs.h
+
+  WITH_DYNLIBMODULE=yes
+
+  DYNLIBMOD_OBJ="dynlibmod.lo"
+
+  DYNLIBMOD_HEADER='$(srcdir)/dynlibmod/dynlibmod.h'
+
+  if test $on_mingw = "no"; then
+    DYNLIBMOD_EXTRALIBS="-ldl -export-dynamic"
+  else
+    DYNLIBMOD_EXTRALIBS="-Wl,--export-all-symbols,--out-implib,libunbound.a"
+  fi
+
+fi
+
 # Check for PyUnbound
 
 # Check whether --with-pyunbound was given.

configure.ac

@@ -616,6 +616,28 @@ case "${UNBOUND_SYSLOG_FACILITY}" in
 esac
 AC_DEFINE_UNQUOTED(UB_SYSLOG_FACILITY,${UNBOUND_SYSLOG_FACILITY},[the SYSLOG_FACILITY to use, default LOG_DAEMON])
 
+# Check for dynamic library module
+AC_ARG_WITH(dynlibmodule,
+   AC_HELP_STRING([--with-dynlibmodule],
+   [build dynamic library module, or --without-dynlibmodule to disable it. (default=no)]),
+   [], [ withval="no" ])
+
+if test x_$withval != x_no; then
+  AC_DEFINE(WITH_DYNLIBMODULE, 1, [Define if you want dynlib module.])
+  WITH_DYNLIBMODULE=yes
+  AC_SUBST(WITH_DYNLIBMODULE)
+  DYNLIBMOD_OBJ="dynlibmod.lo"
+  AC_SUBST(DYNLIBMOD_OBJ)
+  DYNLIBMOD_HEADER='$(srcdir)/dynlibmod/dynlibmod.h'
+  AC_SUBST(DYNLIBMOD_HEADER)
+  if test $on_mingw = "no"; then
+    DYNLIBMOD_EXTRALIBS="-ldl -export-dynamic"
+  else
+    DYNLIBMOD_EXTRALIBS="-Wl,--export-all-symbols,--out-implib,libunbound.a"
+  fi
+  AC_SUBST(DYNLIBMOD_EXTRALIBS)
+fi
+
 # Check for PyUnbound
 AC_ARG_WITH(pyunbound,
    AC_HELP_STRING([--with-pyunbound],

daemon/remote.c

@@ -803,6 +803,9 @@ print_mem(RES* ssl, struct worker* worker, struct daemon* daemon,
 	size_t dnscrypt_shared_secret = 0;
 	size_t dnscrypt_nonce = 0;
 #endif /* USE_DNSCRYPT */
+#ifdef WITH_DYNLIBMODULE
+    size_t dynlib = 0;
+#endif /* WITH_DYNLIBMODULE */
 	msg = slabhash_get_mem(daemon->env->msg_cache);
 	rrset = slabhash_get_mem(&daemon->env->rrset_cache->table);
 	val = mod_get_mem(&worker->env, "validator");
@@ -821,6 +824,9 @@ print_mem(RES* ssl, struct worker* worker, struct daemon* daemon,
 		dnscrypt_nonce = slabhash_get_mem(daemon->dnscenv->nonces_cache);
 	}
 #endif /* USE_DNSCRYPT */
+#ifdef WITH_DYNLIBMODULE
+    dynlib = mod_get_mem(&worker->env, "dynlib");
+#endif /* WITH_DYNLIBMODULE */
 
 	if(!print_longnum(ssl, "mem.cache.rrset"SQ, rrset))
 		return 0;
@@ -848,6 +854,10 @@ print_mem(RES* ssl, struct worker* worker, struct daemon* daemon,
 			dnscrypt_nonce))
 		return 0;
 #endif /* USE_DNSCRYPT */
+#ifdef WITH_DYNLIBMODULE
+	if(!print_longnum(ssl, "mem.mod.dynlibmod"SQ, dynlib))
+		return 0;
+#endif /* WITH_DYNLIBMODULE */
 	if(!print_longnum(ssl, "mem.streamwait"SQ,
 		(size_t)s->svr.mem_stream_wait))
 		return 0;

doc/example.conf.in

@@ -837,6 +837,16 @@ python:
 	# Script file to load
 	# python-script: "@UNBOUND_SHARE_DIR@/ubmodule-tst.py"
 
+# Dynamic library config section. To enable:
+# o use --with-dynlibmodule to configure before compiling.
+# o list dynlib in the module-config string (above) to enable.
+#   It can be placed anywhere, the dynlib module is only a very thin wrapper
+#   to load modules dynamically.
+# o and give a dynlib-file to run.
+dynlib:
+	# Script file to load
+	# dynlib-file: "@UNBOUND_SHARE_DIR@/dynlib.so"
+
 # Remote control config section.
 remote-control:
 	# Enable remote control with unbound-control(8) here.

doc/unbound.conf.5.in

@@ -940,7 +940,9 @@ EDNS client subnet support the default is "subnetcache validator iterator".
 Most modules that need to be listed here have to be listed at the beginning
 of the line.  The cachedb module has to be listed just before the iterator.
 The python module can be listed in different places, it then processes the
-output of the module it is just before.
+output of the module it is just before. The dynlib module can be listed pretty
+much anywhere, it is only a very thin wrapper that allows dynamic libraries to
+run in its place.
 .TP
 .B trust\-anchor\-file: \fI<filename>
 File with trusted keys for validation. Both DS and DNSKEY entries can appear
@@ -1782,6 +1784,22 @@ directory.
 .B python\-script: \fI<python file>\fR
 The script file to load. Repeat this option for every python module instance
 added to the \fBmodule\-config:\fR option.
+.SS "Dynamic Library Module Options"
+.LP
+The
+.B dynlib:
+clause gives the settings for the \fIdynlib\fR(1) module.  This module is only
+a very small wrapper that allows dynamic modules to be loaded on runtime
+instead of being compiled into the application. To enable the dynlib module it
+has to be compiled into the daemon, and the word "dynlib" has to be put in the
+\fBmodule\-config:\fR option.
+.LP
+The \fBdynlib\-file:\fR path should be specified as an absolute path relative
+to the new path set by \fBchroot:\fR option, or as a relative path to the
+working directory.
+.TP
+.B dynlib\-file: \fI<dynlib file>\fR
+The dynamic library file to load.
 .SS "DNS64 Module Options"
 .LP
 The dns64 module must be configured in the \fBmodule\-config:\fR "dns64