This are projects that are built using the Walabot Sensor. There are three different projects in this repository: A) Breathing Detection: This is a python project that uses a radio frequency device called walabot, in addition to the machine learning algorithm Random Forrests, in order to detect breathing action and record data. A hue light is being used as an indicator, being triggered when there is breathing action.
Running instructions:
1- Locate the python script with the name Predictions.py and open it with IDLE 3.4 or your preferred python IDE/ editor. 2- Make sure the Walabot API is installed and placed in the correct directory as coded in the "Predictions.py" file. 3- Update Hue light information in the code if needed 4- Connect your Walabot Device through USB 5- Hang your walabot device to an adjacent wall and secure it to where its stationary, with the Z+ axis facing towards the breathing person 6- Run the "Predictions.py" and the breathing predictions will start occuring.
B) Fall Detection: This is a python project that uses a radio frequency device by the name Walabot in order to detect emergency falls and alert a care giver through an SMS.
Running Instructions:
1-Locate the python script with the name FallDetection.py and open it with IDLE 3.4 or your preferred python IDE/ editor. 2-Make sure the Walabot API is installed and placed in the correct directory as coded in the "FallDetection.py" file. 3-Update the height of your ceiling and your preferred caregiver's number in the "FallDetection.py" file 4-Connect your Walabot Device through USB 5-Hang your walabot device and secure it tightly on the ceiling wall, with the Z+ access facing towards the floor. 6- Run the Program from VS: Debug-->"Start Without Debugging"
C) People Counter: This is a C++ program that uses a radio frequency device called Walabot in order to keep count of the number of people in a room. The project uses the Walabot API, along an algorithm used to localize and keep count of the people.
Running Instructions:
1-Locate the VS solution file under the name PeopleCounter.sln and open it with visual studio 2-Make sure the Walabot API is installed and placed in the correct directory as coded in the "PeopleCounter.cpp" file. 3-Connect your Walabot Device through USB 5-Place the Walabot sensor by the door entrance with the positive Y axis being towards the room and the negative Y axis pointing out. 4- Run the Program from VS: Debug-->"Start Without Debugging"
Disclaimer: All of these projects in this repository have been developed during my co-op rotations at GE Appliances, A Haier Company, and is thus property of the company.